|
|
|
The industry's first 4-way internal combustion forklift truck has employed innovative designs in engineering, control technology and ergonomics allowing for superior operator comfort, efficiency and maneuverability. Available in both LPG/Gas, Diesel and electric/ battery powered engines, the Combilift offers a range of lift models and capacities from 2,000kgs to 14,000kgs and lift heights to 7.5 meters.
|
|
The Landoll B30SE/B40SE/B45SE-HL - The Bendi articulating forklift stores standard pallets in aisles from 1.8 to 2.13 M wide depending on model and lift height. This new range features a Curtis control system consisting of Separately Excited Traction Controls, Hydraulic Controller, foot accelerator and DC to DC converter. Four new models are available with this new control system; B30SE, B40SE, B45SE and B45SE/HL. Capacities at a 24" (600 mm) load center are 3,000 lbs (1363 kg), 4,000 lbs (1818 kg), and 4,500 lbs (2045 kg). Lift heights are available to 433" (11 M). The main features of the new control system include:
- Easily programmed for specific customer's needs regardless of application
- Extended motor life and optimized power usage
- Ramp restraint safety feature automatically limits speed down ramps
- Regenerative braking
- Selectable "Economy Mode" feature increases single charge run time by 25%.
|
|
GTX 16/18/20s
*NEW
AC 48V Super-elastic Tire
GEX 16 3,200 lbs 1600 kg
GEX 18 3,600 lbs 1800 kg
GEX 20 4,000 lbs 2000 kg
Exceptional performance, maneuverability,
reliability under any conditions
AC- Dual drive motors
Total AC power
90° steering axle (GTX) • 101° steering angle (GEX)
Wet multi-disk brakes
Excellent comforts, user friendly
Real-time information on a colour display
Operator programmable parameters
Low noise pump
Various options
Dual-drive motors with counter rotation – allows spin turning
Center of rotation between the driving wheels
Performs the smallest turn radius possible.
Dual drive motors
Improved traction even on wet or uneven surfaces
Tire protection
|
|
The FBESF range is our smallest, most compact electric forklift - This 3 wheel design forklift is designed for light to medium product weights and product movements.
Its compact dimensions ensure it can navigate in tight production areas and rack and stack products in storage systems where operating aisles are at their minimum.
It is flexible enough to be used both inside and outside.
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
Brand new GenEX
1985 was the most meaningful year for the world’s forklift industry since the development of the first forklift in 1917 by Clark. In 1985, Clark’s Genesis series’ customer oriented concept truck was more than an evolution in the industry, it became the standard for what is now a common sense design for every forklift truck.
20 years later, another meaningful evolution is to be realized by GenEX.
GenEX… more than standard.
Driving with remarkable acceleration, gradeability, and stability is always available with GenEX’s dual drive motors, which provide added traction, especially on wet or uneven surfaces. Each motors’ speed and direction is proportionally regulated by steer tire position, and along with a sharp-turn steer axle enables 110% perfect turning radius over any similar range trucks. Fully enclosed wet disc brakes also always provide constant brake performance even in humid, abrasive or corrosive environments., GenEX reacts precisely and dynamically to the operator’s lift and tilt requirements through its standard AC pump motor and controls.
|
|
GO HIGH, REAL HIGH, WITH HYUNDAI
Ready for a good stretch? The Hyundai Forklift Trucks are rugged,
productive, lean-and-mean lifting machines.
Designed for the European market, it delivers optimum
productivity, reliability and comfort in a robust, user-friendly
package. The first thing you will notice is its simplicity:
nowhere will you find a machine that’s easier to operate.
Easy to maintain, and versatile in usage, it’s the field partner that
will never let you down.
Bigger cabin space ensures your easy and swift operation.
Join the winning team and feel the power, with the Hyundai
Forklift Trucks.
Prepare to go high, real high!
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
The 7FBMF range is our more powerful 4 wheel electric forklift range designed for light, medium and heavy product weights and product movements. Also the range extends to very heavy load handling possibilities and multiple load handling for loads between 2.5 -5.0 ton.
The 7FBMF 4 wheel 80v volt truck offers more comfort when travelling on bumpy floors or outdoors compared to its 3 wheel counterparts and compared to the 7FB 4 wheel 48 volt truck - this 80 volt range of 4 wheel trucks can offer more materials handling speed. This powerful range of 4 wheel electric forklifts can ofer similar productivity levels to their engine powered 4 wheel counterparts - offering customers a more environmentally friendly alternative, without sacrificing productivity.
This range is flexible enough to be used both inside and outside
|
|
The GPO-Trucks are heavy-load lifting carts with the added capabilities of a rigid chain system for horizontal transfer positioning. They are available in a variety of standard models and can be custom designed to fit individual application needs.
* die Xchange time 15 mn
* many options ans accessories
* accurate, repeatable positioning
* built-in safety mechanism, movements are monitored via optical sensors
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
Capacity (kg): 2000 - 7000
Fork Length (mm): 1200/1400
Load Center (mm): 600/700
Sideloader, AC Electric version, equipped with Superelastic tyres, suitable to operate either inside or outside. Two electric motors, one for traction and one for hydraulics (lifting/traverse/chassis tilting) provide high speed and power and the ability to cope with steep gradients.
Thanks to its speed, strength and reduced dimensions related to lifted capacity, this model is ideally suited to outside operating areas or in storage warehouses.
|
|
Landoll Corporation offers a model FL EX Explosion Proof Truck.
Four-wheel configuration - front wheel drive; rear wheel steering
High visibility mast, 2 or 3 stage
36 volt electrical system
Adjustable driver's seat
Safety seat switch, cuts power
Seat belts
4-wheel brakes - dual system
Automatic return- to-neutral
Independent hand and seat actuated parking brake
GE "SCR" controls
Quartz hour meter
Hydrostatic power steering
UL "EX" labeling
Designed for ANSI-UL 583, Type EX (Class 1, Division 1, Group D and
Class 2, Division 1, Group G)
Emergency power disconnect switch
Type N-150, 3-contact charging receptacle, Type EX
RFI suppressed to MIL-SDT-461 (Class 3 C)
EX rated motors
Static ground steer tires
Cushion rubber drive tires
Static ground straps
Brass clad forks and load backrest
Overhead guard
Fire extinguisher
Electric horn
Recessed rear tow pin
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. **
|
|
|
1985 was the most meaningful year for the world’s forklift industry since the development of the first forklift in 1917 by Clark. In 1985, Clark’s Genesis series’ customer oriented concept truck was more than an evolution in the industry, it became the standard for what is now a common sense design for every forklift truck.
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
The SLT 30/40 is a very narrow aisle forklift truck that can increase your warehouse size by 50%. It enables you to be more efficient in product storage without adding on to your warehouse. Landoll Corporation also offers cold storage solutions.
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. Verry Narrow 64" Aisles versus Wide 144" Aisles = 12 warehouse rows vs 8 rows = 50% increase in storage. Landoll Corporation has been in business since 1963 offering Quality Products to Quality People**
|
|
|
Based on a vision that focuses on your real-world challenges, the Crown RC 5500 Series offers best-in-class comfort and ergonomics, intelligent technology and practical innovations. It is designed to give the operator unmatched visibility, ultimate ergonomics and revolutionary ride control. The RC 5500 Series is a highly manoeuvrable and productive stand-up c/b truck which allows for easy driver entry and exit especially designed for applications where the operator is required to constantly be on and off the truck.
|
|
Electric Powered Lift Trucks 1.0 - 5.5 tonnes
Our complete range of electric pneumatic and cushion tired lift trucks deliver controllable, programmable performance for the safe handling of different loads such as glass, plastics, bricks, etc.
AC power has increased productivity, lengthened shifts and simplified maintenance routines to improve productivity in heavier applications, more demanding conditions and extremes of temperature. With a range that includes 24V, 3-wheel machines for light duties, 48V 3- and 4-wheel workhorses and heavy duty 80v units. Cat Lift Trucks boast one of the most modern and complete product ranges in the industry.
|
|
|
We believe that your operators should make our lift trucks work hard, not the other way around. Our superior ergonomics will do just that. Also, the J30-40ZT series three-wheel configuration provides a tighter turning radius for unparalled maneuverability that makes stacking in limited space and congested loading bays easier than ever. The dual steer wheels provide a smoother, more stable ride. The on-demand rack-and-pinon hydrostatic steering system uses a brushless steer motor for reliable, maintenance-free operation. Increased productivity, and lower cost of operations.That is the AC Advantage.
|
|
CAPACITY: 1.5t - 2.0t
ELECTRIC SIT-DOWN 3 WHEEL: AMX~BMX SERIES
Powerful AC induction drive motor for top level performance and low maintenance.
3 types of regenerative braking recharging the batteries when:
Accelerator is released
Switch back (reverse shift)
Brake pedal activated
Low and wide floorboard for easier on and off.
Convenient hinged side access cover provides fast access to power steering and hydraulic motors and pumps.
Easy opening, all steel, swing up battery cover.
Overhead guard with full lattice top design and angled front cross member offers exceptional upward view for the operator.
|
|
ATF
Capacity: 1600, 1800, 2000kg
- Supercushion tyres
- Long and short wheel base options
- Yale AC technology
- Yalestop (electromagnetic brake) and auto regenerative braking
- Counter rotational drive wheels enable compact turning circles
- On board diagnostics
- Oil immersed brakes
- 4 pre-set performance settings
- 48 volt system
|
|
Nissan's line-up of three and four-wheel, AC electric, sit-down models deliver exceptional performance with maximum energy efficiency. Powerful and energy efficient, Nissan%u2019s 100% AC series line-up offers incredibly fast travel and lift speeds, with plenty of features to help conserve power or maximize productivity. With AC brushless pump and drive motors, these lift trucks have fewer serviceable parts and longer service intervals, resulting in lower operating expenses and higher productivity.
3-Wheel TX Series: 3,000 / 3,500 / 4,000 lb. Capacities
|
|
|
Toyota's 7FBEU Series 3-wheel electric elevates the idea of energy conservation to an entirely new level. Each subsystem is specifically designed to either conserve or regenerate power, maximizing productivity between battery charges. Furthermore, Toyota's Active Mast Control (AMC) system enhances lift truck load stability, assuring you that safety in your workplace comes first, with productivity coming in a very close second. Check out some of the features below to learn more about these great trucks
|
|
Features:
- 3 Wheels construction, compact design, rear-wheel drive.
- Drive motor: Asynchronous motor 8.0kW, S2, 60 min rating
- Lift motor : Asynchronous motor 5,0kW, S2, 60min rating
- Service brake and hand brake enclosed in a pressure-proof housing.
|
|
|
