I/O

292 companies | 1,794 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
digital I/O card
digital I/O card
TB-5 series

4-Port x4 PCIe interface to support a total bandwidth of 1GB/s Supports four (PoE4) independent GigE Ports Compliant with IEEE 802.3af Single maximum power consumption 23.5W Internal DC 12V Power Input External DC 19-36V Power Input

analog I/O module
analog I/O module
PL300 series

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...

See the other products
Pixsys
8-I/O I/O module
8-I/O I/O module
Multi I/O

Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used ...

digital I/O module
digital I/O module
ESX.iox

Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox fulfils the safety ...

See the other products
(STW) Sensor-Technik Wiedemann GmbH
digital I/O module
digital I/O module
ESX.3ios

The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS ...

See the other products
(STW) Sensor-Technik Wiedemann GmbH
analog I/O module
analog I/O module
ESX.mbc

With the ESX.mbc, we present a new CAN-J1939 module especially for the agricultural and construction machine sector, to control electric motors and actuators in a performance range of up to 200 W. It provides four fast PWM half bridges ...

See the other products
(STW) Sensor-Technik Wiedemann GmbH
analog input card
analog input card
PCI-9524

The PCI-9524 is a robust, multi-purpose module designed for turnkey material test systems (MTS). Equipped with four strain gauge-based transducer input channels, four general purpose analog input channels, and a 3-axis motion controller, ...

See the other products
ADLINK TECHNOLOGY
analog I O module
analog I O module
IOM11, CMO10

... and the number of outputs from 3 to 11. Each I/O Module has 16 inputs and 8 outputs. Up to 31 I/O Modules can be connected to a single Controller, thus providing a total of 496 inputs and 242 outputs. ...

4-channel input module
4-channel input module
G21104401

4-Channel Transmitter + 1 Channel Receiver Dupline Module Specifications Mounting method Junction box With approval according to UL No

analog I O module
analog I O module

The Fieldbus technology is suitable with Schlegel control units particularly for operations utilizing a big number of control units and pilot lights to be connected to the fieldbus with little wiring. The choice to network the Schlegel ...

plug-in input card
plug-in input card
IN.01

Universal inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs. The design of the cards allows their use at any position in the device. If during the use ...

See the other products
Orbit Merret s.r.o.
analog input card
analog input card
IN.02

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs. The design of the cards allows their use at any position in the device. If during the use ...

See the other products
Orbit Merret s.r.o.
analog input card
analog input card
IN.03

Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs. The design of the cards allows their use at any position in the device. If during the use ...

See the other products
Orbit Merret s.r.o.
EtherCAT I/O module
EtherCAT I/O module
ECX-DIO8

Digital I/O module • 8 digital I/Os • Input 24 V, output 24 V / 0.5 A • Power supply via InRailBus or individual supply via COMBICON connector EtherCAT Interface •100BASE-TX ...

See the other products
esd electronics gmbh
digital I/O module
digital I/O module
CAN-CBX-DIO8

CANopen module with 8 digital I/Os • Inputs 24 V • Outputs 24 V/1 A • Input/output programmable CANopen According to CiA® Standards • CiA 301 CANopen application layer • CiA 401 generic I/O-modules 32 ...

See the other products
esd electronics gmbh
analog I/O module
analog I/O module
CAN-CBX-AI420

CANopen module with 4 analog Inputs • Resolution: Up to 20 bits • Programmable input voltage range: ±10V • Easy control cabinet wiring due to 3-lead connection • CANopen profiles according to CiA® specification CiA ...

See the other products
esd electronics gmbh
digital input module
digital input module
Line-M-20i

Module with 20 digital inputs to read consumption using pulses from any type of meter (electricity, water, gas, etc.) or to detect the status (ON/OFF) of any device or sensor associated with a control system (people, units, protection, ...

digital I/O module
digital I/O module
LM4I/4O-M

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...

analog I/O module
analog I/O module

Up to PLd in accordance with EN ISO 13849-1 and SIL2 in accordance with IEC 61508 Screwless terminals for easy installation Status diagnostics via control outputs and LEDs Number of sensors can be increased to 4 per ...

analog I/O card
analog I/O card
PCI-DAS6000

... DAQ board with 8 digital I/O and two 16-bit analog outputs PCI-based 16-channel, 12-bit, 200 kS/s DAQ board with 32 digital I/O and two 12-bit analog outputs PCI-based 64-channel, 16-bit, 100 kS/s DAQ ...

See the other products
Measurement Computing
digital I/O module
digital I/O module
E-Line RIO L-Series

The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented ...

analog I/O module
analog I/O module
Saia PCD1.G360x-C15

The programmable I/O modules of the Saia PCD1 E-Line series with Saia PG5® enable the autonomous and safe operation of the modules even if communication to the master station is interrupted. The local function of a room, ...

digital I/O module
digital I/O module
E-Line RIO S-Series

The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition to the L-Series. ...

digital input module
digital input module
RMS-DI-L-R

The digital input module stores all measured data on an event basis and sends it to the database via Ethernet. The minimum pulse time is 100 ms. Should the connection be lost, the module stores the data intermediately to protect data ...

digital output module
digital output module
RMS-DO-L-R

The digital output module serves to display information, issue alarms and control events. The relays can be interrogated or set via Modbus TCP or the RMS software. It is possible to define the conditions in the RMS software and to actuate ...

wireless I/O module
wireless I/O module
905U series

... distances of up to 10km for the 805U and 20 miles for the 905U are achievable. • Point-to-point digital and/or analogue I/O transfer • Easy to use - no configuration necessary • Secure data encryption • Intelligent ...

See the other products
MTL INSTRUMENT
8 digital inputs input module
8 digital inputs input module
MI series

8 digital inputs 4 test outputs (for short-circuits monitoring) * MI16 - 16 digital inputs 4 test outputs (for short-circuits monitoring) MI12T8 - Input module with test unit * 12 digital inputs * 8 test outputs (for short-circuits ...

See the other products
REER
output module
output module
MO series

2 pairs OSSD Cat. 4 safety outputs (PNP 400 mA) 2 inputs for Start/Restart interlock and EDM 2 status outputs (PNP 100 mA) * MO4 4 pairs OSSD Cat. 4 safety outputs (PNP 400 mA) 4 inputs for Start/Restart interlock and EDM 4 status ...

See the other products
REER
8 digital inputs I/O module
8 digital inputs I/O module
MI8O2 series

MI8O2 - Input/Output units * 8 digital inputs * 2 inputs for Start/Restart interlock and external device monitoring (EDM) * 2 pairs OSSD safety outputs (PNP 400 mA) * 2 status outputs (PNP 100 mA) * 4 test outputs MI8O4 - Input/Output ...

See the other products
REER
analog I O module
analog I O module
P317

... completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. The Trio CANbus I/O expansion can considerably reduce machine wirin

See the other products
Trio Motion Technology
analog I O module
analog I O module

... Modules can be slave stations in LonWorks network consisting of Lonworks compliant products The node can communicate I/O data with other nodes in a distributed network Transmit/receive data quantity can be ...

digital I/O module
digital I/O module
CUBE20 series

Cube20 is a centralized IP20 I/O station with modular function modules and the ability to connect direct to Cube67 modules. The compact modules have a high signal installation of up to 32 channels in one module. This ...

See the other products
MURRELEKTRONIK
analog I/O module
analog I/O module
MO 720 H10

Telematic Module 1x CAN Bus(J1939) 1x USB(mini) GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C IP67 1x IMU Sensor Up to 4 Digital Inputs Up to 1 Frequency Input Up to 4 Analog Inputs Up to 4 Current Inputs Up to ...

See the other products
Makersan
analog I/O module
analog I/O module
MO 720 H15

Wireless I/O Module Cat. M1 / Cat. NB2 1x CAN Bus(J1939) 1x USB(mini) GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C IP67 1x IMU Sensor Up to 4 Digital Inputs Up to 1 Frequency Input Up to 4 Analog ...

See the other products
Makersan
analog I/O module
analog I/O module
MO 720 H17

Wireless I/O Module LoRa / LoRaWAN 1x USB(mini) GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery IP67 Up to 4 Digital Inputs Up to 1 Frequency Input Up to 4 Analog Inputs Up to 4 Current Inputs Up to ...

See the other products
Makersan
analog I/O module
analog I/O module
NXI-5100 series

NXI-5100 series high density programmable resistance card programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, ...

remote IO module
remote IO module
APM-PR

The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...

remote I/O module
remote I/O module
APM-TC

The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...

remote I/O module
remote I/O module
APM-TR

The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...

analog I/O module
analog I/O module
Orion I/O™

... Full population of discrete cards yields 64 I/O in 2 RU (rack units); full population of analog input cards yields 32 analog inputs. See Figure 1 below for front indications and rear connections on Orion I/O. 16-point ...

analog output module
analog output module
MSX-E3511

The Ethernet analog output system MSX-E3511 has 8 analog outputs, 16-bit. It is available in 2 versions: MSX-E3511 with voltage outputs or MSX-E3511-C with outputs that can be set as voltage or current outputs. The system has a 24 V trigger ...

See the other products
ADDI-DATA
digital output card
digital output card
APCIe-2032

The PCI-Express board with 32 digital outputs APCIe-2032 has 32 digital outputs, 24 Vand a programmable watchdog. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, lights etc., als interface ...

See the other products
ADDI-DATA
digital I/O card
digital I/O card
APCIe-1500

The PCI-Express 32 digital I/O board APCIe-1500 has 32 digital inputs/outputs, 24 V, 14 inputs are interruptible. The 16 digital power outputs are equipped with protection diodes and filters. The board is fully compatible ...

See the other products
ADDI-DATA
exhibit your products

& reach your clients in one place, all year round

Exhibit with us