|
|
Why carry a toolbox of gauges and modules? When a Crystal 30 series calibrator can do the whole job!
- small enough to fit in your shirt pocket, everything is built in
- aluminum case and stainless steel sensors make it very tough
- gas or liquid compatible
- Calibrate to full vacuum and high pressure up to 5000 PSI (300 bar)
- accuracy of 0.05% of reading, laboratory accuracy to outdoor field conditions
- calibrated in an environment chamber, duplicating field conditions
- intrinsically safe:
CSA: Exia, Class I, Division 1, Groups A, B, C, D, T4
ATEX: II 2 G EEx ia IIC T4
- 9V battery provides 90 hrs of operation
Pressure is Our Business!
|
|
Intrinsically Safe Pressure Calibrator 718Ex
- Built-in pressure/vacuum hand pump, with vernier and bleed valve, Pressure measurement to 0.05% of full span, using an internal pressure sensor, Pressure measurement to 200 bar using any of the 8 intrinsically safe 700PEx Pressure Modules, Wide range of selectable measurement units for pressure, Pressure switch test funktion, Min/Max hold functions
Also available as a standard non-Ex unit!
Intrinsically Safe Pressure Module 700PEx
To measure a wide range of pressure in an explosive endangered area the range of pressure modules is extended with 8 ATEX compliant modes. These models are compatible with the ecom 718Ex intrinsically safe pressure calibrator and the intrinsically safe multifunction process calibrator 725Ex.
Also available as a standard non-Ex unit!
|
|
CrystalCalXP is a calibration lab in a box! This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester. It eliminates typing and reduces calculation errors. It is specified at 0.1% of Reading accuracy up to 10000 PSI (700 bar) when using Crystal's XP2i digital pressure gauge as reference or at 0.05% of Reading accuracy up to 5000 PSI (300 bar) when using Crystal's 30 Series calibrator as reference. It has an easy to use wizard-based setup. It comes with a weather-proof rolling case that can be used as a portable bench. Weighs just 16 kg/35 lbs.
Watch demo at www.crystalengineering.net/fastcalxp
|
|
Introduction
Beamex's range of portable MC-calibrators for field calibration is known for their accuracy, versatility and also for meeting both high and uncompromised quality standards. Accuracy is assured when you decide to buy any of Beamex's portable MC-calibrators, because they all come with a traceable, accredited calibration certificate.
Benefit from using Beamex calibrators:
* Very high accuracy
* Simple to use
* All-in-one functionality
* Robust casing
* Customization possibilities
* Extensive after-sales services
|
|
|
The CP 400 /420 Dual Sensor Pressure Calibrator provides unmatched pressure measurement flexibility with 0.025%FS accuracy on both internal,isolated,stainless steel pressure sensors. An external pressure module connection supports all BetaPort -P pressure modules for even greater measurement capability. A Pt100 RTD input is provided for temperature measurements accurate to 0.1°C (0.2 °F).In addition,the CP 400 /420 measures 4-20 mA loop current and up to 30 VDC.
|
|
A Pitot Static tester is a pressure generator and pressure measurement instrument which can simulate altitude and speed of aircraft on-board equipments.
Flying conditions need to be simulated on on-board equipments when they are manufactured, repaired, or integrated to the aircraft.
ATEQ-OMICRON has developed two kinds of Pitot Static testers:
• For workshop to test on-board instruments when they are manufactured, repaired or calibrated.
• For hangar or tarmac to verify instrument directly on aircraft.
|
|
Newton is the new Scandura solution for the calibration of pressure and electric devices: transmitters, pressure switches, recorders, controller, manometers, indicators, positioner and converters.
The main features are:
- pressure ranges from -900 mbar up to 700 bar.
- vacuum and pressure generation up to 21 bar
– two channels for the electrical signals
– frequency measurement
– 24 V d.c. to feed the transmitter
– interface to PC through RS-232
– 3 readout visualization
– error calculation
– data storage
– selectable engineering units
– logging function
|
|
MEP, the Scandura electric-pneumatic handheld calibrator, it’s now available with the display embedded. The wide display allows simultaneously to visualise the:
reference pressure value and the related measurement units
transmitter’s output during a calibration (0 ÷ 25 mA)
voltage input signal (0 ÷ 30 V d.c. )
switch status (ON – OFF)
and it can feed also a current loop at 24 Vcc.
Connecting a PDA (with as PalmOS™ sw) to the instrument, by the serial interface, it’s possible to manage the complete calibration cycle till the printing of the reports.
The required software to manage the PDA is supplied into the standard package of the instrument.
Alternatively to the PDA, the device can be connected to a PC by a serial interface unit, so that every terminal can be used. Ranges from 60 mbar up to 700 bar.
|
|
|
The FlowAnalyser PF-300, PF-301 VAC & PF-302 LOW are highly accurate testing devices, which bi-directionally measure flow, pressure, temperature, humidity and O2 concentrations.
|
|
JOFRA DPC-500 PRESSURE CALIBRATOR
Portable and still efficient like a laboratory instrument
With the high resolution, compact JOFRA DPC-500 documenting pressure calibrator new standards are reached within pressure calibration. Designed for high precision calibration of pressure instruments such as pressure gauges, transmitters, digital manometers, pressure switches and overpressure valves, the DPC-500 offers improved pressure accuracy (± 0.025% FS), better electrical current (± 1.6 ìA) and voltage (± 0.5 mV) accuracy and an extended pressure range of 250 mbar to 1000 bar FS. The DPC-500 also offers absolute pressure measurement from 0.4 to 16 bar absolute.
|
|
PASCAL LAB – P, touch-screen high accuracy pressure calibrator for lab applications:
- modular configuration: up to 4 internal pressure sensor
- connector for external sensors
- uncertainty up to 0,01% f.s.
- ranges: vacuum up to 1000 bar
- display touch-screen with 4 variables simultaneously indicated
- huge memory, bi-direction and real-time communication to PC
- large memory storage for the calibration procedures, data and reports
|
|
Primary standards - Pneumatic deadweight testers - Hydraulic deadweight testers - Digital pressure calibrators -Dial gauge comparators - Digital handheld test systems - Pneumatic and hydraulic pumps
Convenient electronic systems ranging from -1 to 700 bar (25 inHg to 10,000 psi) - multiple choices of pressure ranges, pumps, and accuracies, fully temperature- compensated for problem-free and accurate field use.
|
|
Electronic Pressure Calibrator as precision reference instrument for pressure comparison calibration purposes:
Ranges: mbar-ranges up to +4000 bar
Gauge Pressure, Absolute Pressure, Vacuum
Accuracy up to ±0.025% FS
For portable or stationary use.
- Type LDM70-K50: Accuracy ±0.5% FS
- Type LDM70-E25: Accuracy ±0.25% FS
- Type TLDMM-A02: Accuracy ±0.2% FS
- Type TLDMM-A01: Accuracy ±0.1% FS
- Type TLDMM: Accuracy ±0.05% FS
- Type LPC 300: Accuracy ±0.025% FS
- Type LPC 200: Accuracy ±0.025% FS or 0.1% of reading
- Type PC4: lowl presure (mbar-ranges)
|
|
MEP-DC, the SCANDURA portable pressure calibrator, is the perfect solution for the calibration of every pressure device: transducers, manometers, transmitters, converters and switches.
The main features of this calibrator are:
• display of the reference pressure value and the related measurement unit
• maximum pressure value during the measurement process
• leakage indication in a pressure circuit
• current an voltage measurement
• switch status indication
• vacuum and pressure generation up to 21 bar
MEP-DC can feed a supply loop at 24 V d.c. Through a PDA (with a PalmOS™ sw) it manages the complete calibration cycle till the printing of the reports.
|
|
We help you, if you are under pressure!
A suitable pressure calibrator for any application
Pneumatic and hydraulic pressure calibrators of series PM... and PC... distinguish themselves especially by high accuracy of measurement and compact type of construction.
The calibrators are used in the field or laboratory, production and service for inspection or calibration of pressure sensors,
gauges, pressure switches and by-pass valves. Reference pressures of -1 up to 700 bar can be generated in a fast and simple way.
|
|
|
The FlowAnalyser PF-300, PF-301 VAC & PF-302 LOW are highly accurate testing devices, which bi-directionally measure flow, pressure, temperature, humidity and O2 concentrations.
|
|
Type ATE-100 Handheld LCD Digital Calibrator - Pressure, Temperature, Voltage and Current Measurement
-Interchangeable pressure and temperature modules
-Pressure measurement accuracies of ±0.025, 0.05 and 0.10%, or .06/.07%
-Pressure ranges from 0.25 in.H2O to 10,000 psi
-Supports most standard RTD probes and thermocouples
-Min./max., tare, flow, leak, programmable damping, percent function, trip detect, all standard
-High static dP measurement capability
Optional:
FM Approval for Class I, Div. 1, Groups A, B, C & D hazardous areas Datalogging, Hi/Low alarm relays
The Ashcroft® ATE-100 is a calibration system with a vast array of capabilities. These capabilities extend far beyond those of precision pressure measurement. The base unit contains a wide variety of application-specific firmware as well as the ability to measure both current and voltage inputs. In addition, this unit has the ability to interface the system with a computer, data acquisition system or dumb terminal via the standard RS232 interface.
|
|
Digital pressure calibrator HM38
Two individual pressure measuring ranges for gauge, vacuum and differential or absolute pressure
Measuring media: instrument air, inert gases, media compatible sensors available for aggressive / fluid media
11 different selectable measuring units
Datalogging function and RS 232 interface
To measure and generate simultaneously current and voltage
Leak rate, record, ramp, deviation, simulation and trigger function
Incl. free of charge SCS certificate
|
|
Model : HCK
Calibration : 70...700 bar
Other features : available with PC6 PRO
|
|
Model : PCK
Calibration : -1...35 bar
Other features : available with PC6 PRO
|
|
Pneumatic calibrator PK with panel manometer PM
Panel Manometer PM
Electronic and Pneumatic Calibration and Control System
Portable simulation and measurement unit (PK) (can be installed into a 19" laboratory system)
Gauge and vacuum can be generated and regulated with the pneumatic unit
Easy exchangeable measurement range (PM22, PM28)
Measuring media: instrument air, inert gases, media compatible sensors available for aggressive /fluid media
12 different selectable measuring units
Hold function
Datalogging function and RS 232 interface
Measurement for leak rate and tendency
Minimum /maximum values
Incl. free of charge SCS certificate
|
|
Aeronautical pressure controller/calibrator
The DPI 515 precision pressure controller/calibrator, when supplied with this option, enables direct calibration of aeronautical gauges/instruments for altitude or airspeed. The accuracy for altitude is RVSM compliant. In addition, all of the standard DPI 515 functions are available.
The latest measuring and control technology is incorporated in one compact, functional instrument. Multiple processors, advanced software and a large area display are among a host of features that make the DPI 515 the most flexible controller in the market, with simplified operation and reduced maintenance.
Ranges to 910 knots / 80,000 feet
Precision to ±0.17 knots / ±3 feet
RS 232 and IEEE 488 communications
12 month measurement stability
Multilingual
Control of Altitude in feet or metres
Control of Airspeed in knots, KM/hr, mph or mach
Rate of climb entry in units/min or sec
|
|
Characteristics:
- Continuous simulation of Pt100-Signals with a direct high resolution digital-display and temperature measuring
- Simultaneous measuring of signals and simulation of current and voltage signals
- Simulation from current signals and 2-wire-transmittersignals
- Pneumatic check devices with electronic pressure measuring and handpump for simulation of pressures
|
|
The DPI 880 is a lightweight and simple to use hand-held instrument that provides high accuracy measurement of electrical, temperature, pressure and flow parameters from a single device. The DPI 880 measures and sources milliamps, millivolts, volts, ohms, frequency, thermocouples, RTDs, pulses and pressure; captures switch values; and provides 24 volt loop power. Ultra-compact and convenient, the DPI 880 is a powerful tool for testing, configuring and calibrating virtually any process parameter. Dual readings of both input and output parameters simplify calibration and system diagnostics.
The DPI 880 shares common features with the other DPI 800 Series models including a large, bright, backlit display for easy reading in all lighting conditions, rubberized exterior for durability and ruggedness, intuitive menu system for ease of use, Hart® loop resistor, and Intelligent Digital Output Sensor (IDOS?) port for use with remote pressure modules.
?With the DPI 880, we?ve rolled the capabilities of the entire DPI 800 Series line-up into a single device,? said Jim Henke, product manager for GE?s sensing business. ?In spite of the DPI 880?s extensive functionality, we?ve retained the compact design, intuitive operation, and high accuracy levels that our customers require. ?
|
|
Applications:
- National institutes and institutions
- Research and development laboratories
- Industry (laboratory, workshop and production)
- Calibration service companies
Special Features:
- Up to 4 sensors can be integrated
- Pressure ranges: from 0 ... 100 mbar to 0 ... 2500 bar
- Total uncertainty of measurement: 0.025 % ... 0.008 % (certified)
- Over pressure safety (up to 400 bar)
- Easy retrofitting
Remarks:
- modular up to 4 Sensors (different types)
- can be easily retrofitted (module concept)
- optional with barometric reference
- calibration software EasyCal available
|
|
ADTS 505 Compact, portable Air Data Test Set
The ADTS 505 is a precision twin-channel Ps and Pt pressure control test set for the accurate calibration/verification of civil aircraft pitot statistics.
Compliant with RVSM (Reduced Vertical Separation Minimal) requirements
Features:
- High accuracy – RVSM compliant
- Fully automatic control
- Rugged flightline construction
- Wide ranging aircraft compatibility
- Integral pneumatic supplies
- Protection for aircraft instruments
|
|
PC6 IDOS Pressure Calibrator
combines the latest developments in pressure instrumentation with advanced sensor and component technology to offer a versatile calibration instrument.
The PC6 IDOS is supplied with our hand held test systems:
LTP1 Low Pressure pneumatic test system -27 inHg vacuum to 45 psi (-900 mbar to 3 bar)
TP1 Pneumatic pressure test system -27 inHg vacuum to 600 psi (-900 mbar to 40 bar)
HTP1 Hydraulic pressure test systems to 10,000 psi (700 bar)
Intecal for Industry compatible
Features & Benefits:
It is designed for accurately testing and calibrating the following types of instruments:
Pressure Transducers / Transmitters
Pressure Switches / Relief Valves
Pressure Indicators (analogue / digital)
Process Indicators
Current / Voltage to Pressure Converters
|
|
These Pressure Calibrators from KELLER are very precise calibration instruments for the calibration of pressure transmitters, pressure switches and pressure gauges.
The Low- and Medium ranges are pneumatic, and the High ranges are hydraulic. The portable housing incorporates the pressure generating pump, a high precision reference sensor and the measuring electronics.
The transmitter under test is connected to the pressure port of the calibrator and the signal is read out directly on the display. Various internal functions and performance features assist the user in many different measuring tasks. In addition, the serial interface allows the transfer of the measured data onto a PC for further processing. The calibrator, including accessories, is supplied with a robust carrying case and is ideal for outdoor, on-site use.
To meet differing requirements, two basic versions of the calibrator are offered:
Full-Version
The Full-Version of the calibrator is a complete, self-contained transmitter testing unit. With internal supplies for the transmitter and the calibrator itself, the self-contained instrument is always ready for use. For a variety of measuring and testing tasks, a wide selection of software functions are incorporated:
MANO
displays the pressure and the maximum and minimum pressures
MANO (with transmitter connected)
displays the pressure, the transmitter signal and the temperature
HOLD
freezes the actual measured values on the display
|
|
The Fast, Portable, Low Cost, Easy-to-Operate, Gauge Calibration Solution.
- self contained precision hydraulic pressure comparator for the calibration of pressure gauges rated up to 700 bar or 10,000 PSI
- with a simple turn of the handle, it takes less than ten minutes with 5 to 10 test points
- comparator can be filled with water, oil or isopropyl alcohol allowing for clean and safe calibration of almost any type of gauge
- can be used without fluid and FastCalXP 2.0 to calibrate DP transmitters to 300 inches of H2O
- faster to use than a deadweight tester or an automated pressure controllers but costs much less
- ideal to calibrate low cost gauges that are overlooked for ISO9000 compliance
- can be bench mounted
- light weight, compact and portable
- unique design eliminates damage to mechanical pressure gauges
Pressure is Our Business!
|
|
Beamex's calibration accessories complete your investment into calibration equipment. Utilizing calibration accessories means an ability to extend configuration possibilities. For instance, by using the external pressure modules you are able to calibrate a wide pressure range with one calibrator.
|
|
|
|
