Other positioning stages

Linear axes and axis systems are used in many ranges of industry to transport or position components. HIWIN offers linear axes with toothed belt drive for applications with high dynamics and speed. Thanks to HIWIN's modular system, the belt axes can be ...

Load: 5 kg - 130 kg

Linear axes and axis systems are used in many ranges of industry to transport or position components. HIWIN offers linear axes with toothed belt drive for applications with high dynamics and speed. Thanks to HIWIN's modular system, the belt axes can be ...

Load: 16, 30, 8, 2 kg

Linear axes and axis systems are used in many ranges of industry to transport or position components. HIWIN offers linear axes with toothed belt drive for applications with high dynamics and speed. Thanks to HIWIN's modular system, the belt axes can be ...

Stroke : 5 mm - 100 mm

... Endless variety This adjustment slide system satisfies any individual requirement. Every axis configuration is conceivable. Whether X-Y, X-Z, X-Y-Z or X-Y-Y-Y or, or, or... In order to cover the range of applications, the four sizes 30, 50, 80 and ...

... ... through high-quality slide or roller guides Standard slides are made of grey cast iron GG25. If required, the slides are also chemically nickel-plated or are available in an AL natural anodised version. Standard hole patterns, T-grooves, clamps, ...

Stroke : 120 mm - 700 mm

... finely ground dovetail guides table areas accordingly plane-parallel and with accurate angles spindle hardened + ground, pitch accuracy 0.01 to 300 mm slotted bronze nut millimetre rids with pointers large scale rings, adjustable and hard-chrome-plated determination ...

... Multi-axis modular system – Implementing gantry systems quickly and simply The modular system from RK Rose+Krieger can be used to construct linear, planar and three-dimensional gantries in a short space of time. The RK DuoLine and RK MonoLine axis ...

Stroke : 0 mm - 920 mm

... Designed for manual adjustment with stellar price-performance ratio, the RK Compact profile linear actuator ensure optimum adaptability of supplements and individual components while reducing assembly and increasing precision. This unit is designed ...

Stroke : 0 mm - 200 mm
Load: 1, 2, 5 kg

... Economical manual positioning table drived by leadscrew. Actuated by grip knob. Guided by 2 rods on bronze bearings. Options : Positioning indicator Position clamping Base plate (with or without ruler) Assembly in XY or YZ table Using of economical ...

Stroke : 0 mm - 400 mm
Load: 2 kg - 50 kg

... Manual positioning table drived by lead screw Guided by 2 rods on bronze bearings or ball bushings Options : Handwheel or grip knob Positioning indicator Position clamping Assembly in manual XY positioning table Precision manual tables The ...

Stroke : 0 mm - 300 mm
Load: 3, 7, 12, 20 kg

... Manual lifting table Driving by leadscrew Guided by 2 rods Options : Handwheel or grip knob Positioning indicator Position clamping Assembly in XY or XYZ table Interest of lifting table These tables can be fixed by only one end thanks to a ...

Stroke : 12 mm
Speed: 20 m/s
Repeatability: 40, 200 nm

... The SLC-1720 is the smallest nanometer precision linear stage in SmarAct's SLC-17 series. At 22 x 17 x 8.5 mm, it is the world's smallest closed-loop piezo stage with nanometer resolution and macroscopic travel range. Please note that the downloadable ...

Stroke : 21 mm
Speed: 20 mm/s
Repeatability: 200, 40 nm

... With dimensions of 30 x 17 x 8.5 mm, this small nanometer precision linear stage SLC-1730 offers a travel range of 21 mm and a normal load of 20 N. Please note that the downloadable documents for this linear piezo stage show the dimensions and specifications ...

Stroke : 26 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm

... With dimensions of 40 x 17 x 8.5 mm, the SLC-1740 offers a travel range of 26 mm and a normal force of 30 N. Please note that the downloadable documents for this linear piezo stage show the dimensions and specifications of an SLC-1740 for atmospheric ...

Payload: 2,500 kg - 60,000 kg
Weight: 350 kg - 1,500 kg

... Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature ...

Payload: 1,200, 300 kg

The Welding Universal Balance Positioner permits the manual rotation of the workpieces bringing them into any positions in the space improving the ergonomy of the operator. The rotation is performed rapidly and safely once reached the center of gravity ...

... Two isel linear units LES 5 adjustable for no play with integrated servomotor Recirculating ball drive, pitch 10 mm Travel: X-axis: 210/310 mm Y-axis: 210/310 mm Options (Cross table 10/20): 5 mm spindle pitch Milled T-slot plate step ...

... Low-backlash toothed belt drive with stepper or servo motor Reduction ratio 1 : 24 (standard) Weight: 14.6 kg FEATURES Low-backlash toothed belt drive with stepper or servo motor Ratio ratio 1 : 24 (standard) Weight: 14.6 kg OPTIONS: Reduction ...

... APOS Optic The production lines of modern industry are becoming increasingly intelligent. The degree of networking of the systems is rising rapidly – and with it the demands on process reliability. Automatically controlled conveyor systems along assembly ...

Carrying capacity: 5 kg - 800 kg

... Frienldy for train windows Equipped with 4 suction cups to a maximum load of 80 kg to take off and install windows on trains. The operator can carry out the activity with minimum effort and in complete safety thanks to the pneumatic tilting 90° from ...

Stroke : 0.5 in

... Ball Slide Positioning Stage (plain model with no micrometers) Please note: This unit is supplied with no micrometers, no micrometer brackets and no springs. Work surface dimensions, height dimensions, hole locations and sizes only apply in the drawings ...

Stroke : 0.5 in

... Ball Slide Positioning Stage Family: 100 Model: 101-XY Price: $ 420.00 Add metric micrometer heads w/standard inch threaded holes $0.00 Add Posi-Lock carriage lock $108.00 ...

Stroke : 13 in

... Ball Slide Positioning Stage Family: 100 Model: 101MM-XY Price: $ 420.00 Add metric micrometer heads w/standard inch threaded holes $0.00 Add Posi-Lock carriage lock $108.00 ...

Carrying capacity: 1,200 kg
Maximale stroke: 1,600 mm
Pressure: 6 bar

... The ZH90 lifting axis is a linear lifting system from Zeilhofer Handhabungstechnik for the pendulum-free lifting and positioning of loads up to 1,200 kg.

The standard working stroke is 1,600 mm and can be extended with options such as the double ...

Repeatability: 5 µm
Load: 30 kg
Stroke: 300 mm

Open-frame XY stages designed with a low profile for a wide range of automated accurate positioning in microscope-based applications. The drive mechanism located on the side of the unit and offers a clear unobstruced two axes aperture to enable light ...

Stroke : 50 mm - 1,000 mm
Speed: 200,000 mm/s
Repeatability: 0.5 µm - 1 µm

... Gantry style cartesian robots with large working areas. All moving axes located above work area. - XYZ Gantry 300 x 300 x 50 mm travel - Ball screw mechanism - Stepper or servo motor driven Options include: - larger or smaller travel ...

Repeatability: 1 µm
Load: 30 kg
Stroke: 300 mm

Open-frame XY stages designed with a low profile for a wide range of automated accurate positioning in microscope-based applications. The drive mechanism located on the side of the unit and offers a clear un-obstructed two axes aperture to enable light ...

... Opto´s Measuring Stage 25 x 25mm analog is designed for incident and transmitted light application. Technical Features Glass plate D=100mm for incident and transmitted light application - Cover plate 135 x 135mm - Stage height = 35mm - Maximum ...

... Opto´s Measuring Stage 50 x 50mm analog is designed for incident and transmitted light application. Technical Features - Glass plate D=100mm for incident and transmitted light application - Cover plate 135 x 135mm - Stage height = 35mm - Maximum ...

... Measuring Stage 50x50mm Analog Technical Features Aricle Number 100-MS50-AN - Cover plate 135 x 135mm - Stage height = 35mm - Maximum load 10kg - with 2 manual micrometer spindles Measurement range: 50mm, Resolution: 0.01mm For more information ...

... DIY 6DOF Platform with AMC-AASD15A Controller for you.
Click our Website for more details:
https://unite-ch.net/product/6dof-motion-platform-actuators-simtools/

This 6DOF motion Platform can support 200kg ...

... DIY Racing Simulator 4DOF+TL+Surge Platform with AMC-AASD Controller-Simhun-motion,Sim Racing Studio,Simtools,FlyPT Mover
Click our website for more details:
https://unite-ch.net/product/sim-racing-simulator-4doftlsurge-platform/

This ...

... DIY 6DOF Motion Platform Movement simulator platform compatible with
Simhun-motion,Sim Racing Studio,Simtools,FlyPT Mover
Click our website for more details:
https://unite-ch.net/product/6dof-full-motion-platform-system-flyerpt/

This ...

Repeatability: 1.5 µm
Load: 80 kg
Stroke: 365 mm

... VULCANO2 is our gantry stacked-axes architecture combining our renowned ironcore motors, mechanical bearing and high-end optical encoders to deliver great geometrical performance at high dynamics. When compared to our stacked CHARON2 family, the VULCANO2 ...

Repeatability: 1 µm
Load: 30 kg
Stroke: 365, 355, 475, 410 mm

... HD stands for high dynamics. With CHARON2HD, dynamics of the existing base product are doubled without compromise on performance. As for the CHARON2 family, the HD versions come in a multitude of different predefined configuration ranging from single ...

Repeatability: 5, 10 µm
Load: 4 kg - 25 kg
Speed: 0.1 m/s - 10 m/s

The Z3TM+ is enlarging the portfolio of modules serving motion platforms. This module adds four independent degrees of freedom, namely Tip, Tilt, Theta and Z axes embedded inside an enlarged theta hollow shaft. One configuration includes a Z axis that ...

Stroke : 3.81 cm - 64.77 cm
Repeatability: 4 µm
Load: 6.8 kg

The smallest of the UniSlide Linear Stages with a body width of 1.5 inches, slider length of 1.5 inches and a carrying capacity of 15 lbs. horizontal load. The A15 can travel up to 25.5″ with the 1.5″ slider/carriage. Because of it’s light weight, the ...

Stroke : 3.81 cm - 62.23 cm
Repeatability: 4 µm
Load: 13.6 kg

... The A25 Series UniSlide stage has a body width of 2.5 inches, slider length of 2.5 inches and can carry a 30 lbs. horizontal load. The A25 can travel up to 24.5" with the 2.5" slider/carriage. A25 Series UniSlides are comprised of an aluminum alloy extruded ...

Stroke : 5.08 cm - 96.52 cm
Repeatability: 4 µm
Load: 45.5 kg

... The A40 Series UniSlide stage has a body width of 4 inches, slider length of 4 inches carrying a 100 lbs. horizontal load. The A40 can travel up to 38" with the 4" slider/carriage. The A40 is very versatile for a variety of applications. A40 Series UniSlides ...

Stroke : 10 mm
Speed: 1.5 mm/s
Load: 20 g

... compact design smallest product in our portfolio Ultra small miniature translation stages with piezo electic inertial drive. Technical data Width - 22 mm Height - 7 mm Depth - 15 mm Max. load Momentum (Mx) - 4.5 Ncm Momentum (My) - 1.5 ...

Stroke : 3.5 mm
Speed: 1.5 mm/s
Load: 6 g

... compact design smallest product in our portfolio Ultra small miniature translation stages with piezo electic inertial drive. Technical data Width - 15 mm Height - 7 mm Depth - 15 mm Velocity - 1.5 mm/s Max. load Momentum (Mx) - 4 Ncm Momentum ...

Stroke : 8 mm
Speed: 1.2 mm/s
Load: 32 g

... for various application fields our all-rounder multi axes combinations without adapter plates Miniature translation stage with piezo electric inertial drive. Technical data Width - 30 mm Height - 12.5 mm Depth - 30 mm Velocity - 1.2 mm/s Max. ...

The Rotator is a machine designed to enhance efficiency and safety in industrial processes. Built to handle and rotate heavy loads with precision, the Rotator is the perfect solution for industries such as metalworking, construction, and complex structure ...

... TILTING-ROTATING TABLE COLIBRÌ The Colibrì rotary-tilting table was designed to meeting the need for 5-axis machining operations for the manufacturing of glasses with dedicated NC machines. The main advantage of this table is without doubt the high dynamic ...

... Product Overview The 2-axis table TLT-210 SMART is designed as accessory for realizing the 4th and 5th axis on small/medium size vertical milling machining centres. Types of Application TLT-210 SMART allows to produce complex parts orienting ...

Carrying capacity: 1 kg - 1,000 kg
Working radius: 3 m - 7 m

Our Flexi range of lift assists are a cost-effective alternative to a pneumatic or electric balancer. There are two product variants, pneumatic or electric. Both versions feature single hand operation with infinity variable speed control. The lift and ...

... SPIDER - POLYVALENT PALLETIZER • Maximum gripping surface • Reduced drive inertia • Ideal for handling, positioning and storing ...

... CLA has the know-how to design, assemble, test and install automation equipment your need. Knocking at our door, you are sure to meet a powerful team listening to the needs of its customers. The CLA low vibration XY table enables to perform movements ...

... The MPC-145 System consists of the MPC-100 controller and an MP-845 micromanipulator. The new MP-845 micromanipulator features construction based on the lead screw design of the TRIO-245, but with the addition of precision cross-roller bearings for ...

... The MPC-385 System consists of the MPC-200 controller and one to four MP-285 micromanipulators. MPC-200 Controller and ROE Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become ...

... The MPC-365 System consists of the MPC-200 controller and one to six MP-865 micromanipulators. MPC-200 Controller and ROE Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become ...

Payload: 500 kg - 20,000 kg
Rotational speed: 4 rpm - 30 rpm

... Product
[IDCD] INVERSE DROP CENTER DOUBLE

IDCD Series Key Properties:

• Rigid structure for stable, repeatable positioning
• High-precision positioning suitable for robotic welding and machining tasks
• Designed

Payload: 500 kg - 20,000 kg
Rotational speed: 4 rpm - 30 rpm

... Overview
IDC series robotic positioners are engineered for handling long and complex workpieces in industrial automation. They feature a rigid structure, continuous 360° rotation and a configuration with one station and two horizontal axes to ...

Payload: 1,000 kg - 40,000 kg
Rotational speed: 3 rpm - 15 rpm

... Overview
THZL is a series of 2-axis robotic positioners engineered for high-precision welding and automation. Each unit provides one horizontal and one vertical axis and features a sliding tailstock to adapt to different workpiece lengths. The ...