-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Robotics - Automation - Industrial IT >
- Automation >
- Other controllers and regulators
Other controllers and regulators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Collision protection for automated guided vehicle systems * 3D camera also detects obstacles above the detection zone of conventional safety laser scanners * The system optimises the collision warning based on speed and steering angle * ...

Dual Channel, Dual Torque Adjustable The CBC-300 has two adjustable current channels. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment ...
WARNER ELECTRIC

MAESTRO XS Maestro XS is a control device able to adapt the air compressor operation to the load profile required by the network to which it is connected. Provided with several programming and operation and anomaly analysis levels, it ...
MATTEI

MAESTRO XB Maestro XB is a microprocessor command and control device able to adapt the compressor operation to the specific needs of the air network to which it is connected. It features several programming levels and the possibility ...
MATTEI

MAESTRO XC Maestro XC is a latest-generation control device designed to optimise the compressor operation in terms of energy efficiency and respect for the environment. It can be fully integrated with other systems and is equipped with ...
MATTEI

SITRANS LT500 is the next evolution of level, flow, and pump controllers for radar transmitters – or any 2-wire 4-20 mA device. It is the first choice for radar sensor measurements at 80 GHz and features single and dual point measurements, ...
Siemens Process Instrumentation

MultiRanger 200 HMI is a versatile short to medium-range ultrasonic single and multi-vessel level monitor/controller for virtually any application in a wide range of industries. MultiRanger 200 HMI can be used with various materials, ...
Siemens Process Instrumentation

HydroRanger 200 is an ultrasonic level controller for up to six pumps and provides control, differential control and open channel flow monitoring. For water authorities, municipal water and wastewater plants, HydroRanger 200 is an economical, ...
Siemens Process Instrumentation

Safe protection zone monitoring in rugged conditions With the world’s first safe complete solution for protection zone monitoring based on radar technology, Pilz is expanding its portfolio in the field of safe sensor technology. It consists ...
PILZ

Safe position monitoring with process guarding in one system Non-contact safety gate systems PSENslock combine safety gate monitoring with a non-contact magnetic interlock in just a single unit. With this combination of safe position ...
PILZ

Many functions, flexible to use – The future-proof solution! Use the configurable control systems PNOZmulti 2 to implement multiple safety functions on your plant or machinery. The base units are only 45 mm wide and are expandable. As ...
PILZ

Central processing unit for an automation system JUMO variTRON 500 JUMO variTRON 500 is based on the modular platform JUMO JUPITER. The central processing unit along with the tried-and-tested input and output modules (incl. controller ...
JUMO GmbH & Co. KG

CONiQ® Control 4.3” Compact is an innovative and flexible weighing control system, for use with various industrial weighing applications and process controls. Awarded the reddot award, the touch control interface intuitively guides the ...
Schenck Process Holding GmbH

Automation system - LOGiQ the fully automated yard management software. LOGiQ® is a logistics control system for the bulk and general cargo industry, developed by Schenck Process. A logistics solution for a wide range of industries from ...
Schenck Process Holding GmbH

Precipitator supervisory control system Integrating all FORRY™ Environmental Control products, the FORRY™ Net system serves as the central communications hub, master controller, HMI server, and Modbus interface for the entire ESP. For ...
Schenck Process Holding GmbH

Maximum temperature: -50 °C - 1,300 °C
The TC10-L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user. The TC10-L features universal input, 3 Dynamic Colors Led Display two alarm outputs, retransmission output, ...
YOKOGAWA Europe

1. Enhance the field digital solution with PROFINET support Yokogawa offers a communications card for the PROFINET* Industrial Ethernet standard, which is widely used in Europe. With this enhancement, the operation and monitoring of ...
YOKOGAWA Europe

Yokogawa is the world's most experienced safety and control firm. Our commitment to providing reliable, state of the art safety instrumented systems is rooted in a wealth of installations since 1962. The solid-state, hard-wired ProSafe-SLS ...
YOKOGAWA Europe

The Watlow® LEGACY SERIES panel mount controller is an industry-leading PID controller that allows optimal performance utilizing simple control and menu functionality without complex features. It is ideally suited for basic applications ...
Watlow

Watlow’s new ASPYRE DT SCR power controller family is flexible and scalable, and available with a variety of options allowing one platform to be re-used across a wide range of applications, which can help save time and money. ASPYRE DT ...
Watlow

The DIN-A-MITE® A power switching device controller is designed and manufactured with quality features expected from Watlow. DIN-A-MITE A capabilities include single-phase zero-cross switching up to 25 amperes at 600VAC (see rating curve). ...
Watlow

The MPS Motor Protection System monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. The MPS is a modular system with integrated protection, motor control, metering, and data-logging ...

The PC-105 is a 5-channel pump controller designed to handle multiple pump applications. Alternatively, it can operate as a 5-channel switch. The PC-105’s control functions support all of the popular industrystandard multi-pump pump-up ...

The consumption of a wide variety of industrial goods is significantly increasing worldwide. As a result, machines are becoming ever-bigger and more complex to increase capacities. The number of bearings and lubrication points that ...
Eugen Woerner GmbH & Co. KG

453.860 Monitoring Switch-on function: Time or counting Switch-off function: pulse off Parameter monitoring: Working time Setting values: Time
Eugen Woerner GmbH & Co. KG

453.876 Monitoring Switch-on function: Time or counting Switch-off function: pulse off Parameter monitoring: Working time Setting values: Time / Counting pulses
Eugen Woerner GmbH & Co. KG

This Thermoplastic enclosure is a slender shock-proof enclosure which can be installed at an ergonomic favorable position and suitable to commercial-off-the-shelf aluminum profiles. It has a large range of illuminated push buttons, selector ...

The CU4 series is a portfolio of control units that allows users to safely, efficiently, and reliably process their products. Each CU4 offers advanced functionality and features at a price-competitive value. These innovative control units ...

The CU4plus utilizes the latest in advanced APV control unit technology to offer the optimum solution to control and monitor sanitary valves. The control units provide increased process accuracy and safety, easy operation, and reliable ...

The VM25 is a modular fully programmable system designed for high performances applications in grinding machines. It is able to provide solutions for: – One and two plane automatic balancing of the grinding spindle – Touch detection ...

VM15 is a programmable modular system designed for medium complexity applications in grinding machines, with high performances and cost effective. It is able to provide solutions for: – 1 plane balancing of the grinding spindle – Touch ...

Highlights • Ideal for controlling and obtaining comprehensive information on the values of the currents, voltages and powers of industrial electrical heating processes. • Configurable command input: 0-10 V – 0/4-20 mA • Master/slave ...

The accurate, modular THYRITOP 600 range of power controllers can be used to manage the electrical power of any type of industrial heating element, offering extensive modularity for all single-phase, split-phase and three-phase applications. ...

The STATOP 48x48mm digital controllers are designed for thermal process, featuring 1 regulation channel and 2 alarms or 2 "hot/cold" regulation channels and 1 alarm, Ramp functions and guarantee of temperature and timer. It also features ...

Where no speed-controlled feed pump is available, continuous regulation with the RM feed water regulation module is a suitable alternative for all boilers fitted with modulating burners and flue gas heat exchangers. This module slows ...
Bosch Industriekessel GmbH - Industrial Boilers

Standard control, for floor-standing boilers with integrated burner (Condens 7000F) Built-in CW400 control module, to facilitate programming and diagnostics on the heating system Possible to install two additional integrated function ...
Bosch Industriekessel GmbH - Industrial Boilers

The Control 8000 provides graphical displays of all heating circuits and system components. The operator can name the heating circuits individually using a keyboard. Heating circuits and heat sources can be displayed in detail on multiple ...
Bosch Industriekessel GmbH - Industrial Boilers

Product Description This LOCTITE® LED Flood Quad Controller supplies power and control for up to four (4) LOCTITE® LED Flood Arrays. Choose from (365 nm wavelength, item #2139182; 380 nm wavelength, item #2139181, or 405 nm wavelength, ...

BONDERITE E-CO DMC These days creating added value involves more than just an excellent product profile. You also need a partner who understands your business and your products, and who can develop new production techniques, optimise ...

Controller 97160 provides precise application of 2-part Loctite® products, such as MMAs, Epoxies and Silicones. Applications include drop or bead dispensing or potting. In line manufacturing or other automated workplace environments, ...

For controlling, igniting and monitoring impulse-controlled, modulating or step-by-step controlled gas burners, for continuous operation with ionisation control, for intermittent operation with UV control (with UV sensors of type UVS) ...
Honeywell Thermal Solutions

Automatic burner control units in 19″ standard rack for controlling and monitoring gas burners, for intermittent operation, ionisation or UV control, complies with EC Machinery directive. PFS 778: main gas after safety time or ...
Honeywell Thermal Solutions

The IFD 258 automatic burner control unit can be used to control gas burners and may work for UV control settings and a cut-off rate for a flame current. This also uses measuring sockets for a flare current measurement, a single-electrode ...
Honeywell Thermal Solutions

TOM from Fiam is a brand new and reliable monitoring unit that checks the status of the tightening process in real time regardless of the skill of the operator. The foolproof practical and economic Poka Yoke system provides instant feedback ...
FIAM Utensili Pneumatici Spa

The automatic screwing unit, also called as the automatic feeding manufactured by Fiam People and Solutions is used for the tightening control system. This device is suitable for electric nut runner motors that comes with a current controlling ...
FIAM Utensili Pneumatici Spa

Control unit for tightening solution with torque/angle current control. The control units of this new range can program, control and manage all the tools functions. Designed and built entirely by Fiam, they represent a strategic choice ...
FIAM Utensili Pneumatici Spa

Mensor pressure controllers such as the CPC8000 have been part of the WIKA product range since 2006. Application The model CPC8000 high-end Mensor pressure controller provides always an appropriate calibration solution on account of its ...

Design The highly configurable pressure controller model CPC6050 modular pressure controller offers maximum flexibility to best suit the customers’ requirements. The pressure controller can have up to two independent pressure regulating ...

The inlet pressure control unit model GA05 has been developed for conducting SF6 gas analyses on equipment with little overpressures as well. Low pressure primarily occurs in medium-voltage equipment. The gas is compressed in the GA05 ...

The IM(X) 12-CCM (Cabinet Condition Monitoring) can be installed and even retrofitted in virtually any cabinet or any protective enclosure to continuously check the current protection degree offered. The DIN rail device issues a switching ...

CPS-MC341-ADSC1-111 is an integrated type of a M2M controller with isolated RS-422/485, isolated digital/counter input, isolated digital output, analog input isolated between the channel, RS-232C and Ethernet Hub. It is equipped with ...
CONTEC

The IEC 61131-3-compliant New-generation Industrial IoT Controllers, the CONPROSYS PAC Series These products are EtherCAT/Modbus Master controllers with isolated RS-422/485, isolated digital input/output, isolated counter input, inter-channel ...
CONTEC

The IEC 61131-3-compliant New-generation Industrial IoT Controllers, the CONPROSYS PAC Series This product is an EtherCAT/Modbus Master controller with isolated digital input and output (Input: 4ch, Output: 4ch), RS232C, and LAN interface. ...
CONTEC

DESIGNED FOR RELIABILITY AND UPGRADABILITY DJI’s latest generation of the NAZA series, the N3 flight controller, is tailor-made for a multitude of hobbyist and industrial applications. Its robust flight control algorithm is ideal for ...
DJI-Innovations Company Limited

A2 welding controller (PEI) is the control system for ESAB A2 tractors and A2 welding heads. The controller is connected to the power source by a control cable and can be connected to ESAB LAF 631 and LAF 1251.
ESAB

ESAB has been developing robot welding equipment in cooperation with ABB since the beginning of the 80s. The introduction of the Arcitec software at the end of the 90s supported an efficient communication between the robot control ...
ESAB

For use with ESAB CAN-controlled power sources and motors. Features Designed for use with ESABs automatic welding power sources LAF and TAF CAN-bus system for data transfer Prepared for submerged arc welding (SAW), gas metal arc ...
ESAB

Screen size: 7 in - 15 in
QuickPanel+ 12" screen with View and Control Simplify development and maintenance with one powerful device for operator interface (OI) and control. The multi-functional QuickPanel+ delivers actionable data and insight smarter, faster ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please specify:
Help us improve:
remaining