Other automotive maintenance equipment

· Product overview It is mainly applied to the online monitoring of carbon emission of flue gas components CO, CO2, flue gas parameters (temperature, pressure, flow rate, humidity, oxygen content) emitted by various fixed sources, ...

High-performance metals analysis made affordable The OE750 and the NEW OE720 are ground-breaking OES metals analyzers. They cover the complete spectrum of elements in metal* with low detection limits and state-of-the-art multi-CMOS ...

Lifting table X-ONE recommended for light, smart and quick repair X-ONE is a lifting and rapid pulling platform specially designed for light and cosmetic damage repairs. Quick loading and easy to set up to pull, electronic measuring ...

Lifting and pulling platform – Recommended for light and medium repair X-TRAC is a lifting platform specially designed for light and medium repairs. Once the vehicle is positioned on the platform, it can be easily and rapidly lifted ...

Rack for the repair of frame and unibody vehicles REF NOVGX.5000 , VGX.6000 VEGAMAX is a straightening rack equipped with 2 pulling towers with hydropneumatic pumps, rams and chains, with the capability of 360° around the rack. ...

Perform fast, accurate and reliable elemental analysis of solid metal samples from trace to percent level with the Thermo Scientific™ ARL™ easySpark™ Metal Analyzer. This new benchtop optical emission spectrometry (OES) instrument is ...

Inflation bell without sealing ring and other wearing parts Extended working radius (up to 6 wheels) with telescope design Applicable with any rim configuration, also light alloy rims with edgeless, spoke design No loads ...

Item name - PORTABLE TIRE INFLATOR WITH WALL STAND - Complies with directives 86/217/EEC and 87/404/EEC Specifications: - max pressure: 14.33bar - working pressure: 10bar - overpressure protection: 10bar - tank gauge: 0-14bar - ...

Item name - PNEUMATIC VACUUM BRAKE BLEEDER Intro - Allows you empty the brake fluid reservoir and bleed the brake lines. Product highlight - Single operator Specifications - Vacuum kit capacity 800ml -Powered by compressed ...

COOLING SYSTEM FILLING/DRAINING DEVICE This mobile device allows to drain, check the tightness, clean, create a vacuum to purge the cooling circuit and fill it, thanks to its venturi system coupled to a pressure gauge. Ensures an ecological ...

The AQ7050 and AQ7060 atmospheric particulate monitors are based on β-ray technology and can be used to detect the contents of PM10 and PM2.5 in the atmosphere and to test and evaluate the concentration of particulates in ambient air ...

Epsilon 1 ULS is the ideal analytical solution. Pre-calibrated in the factory, our instrument is an out-of-the-box solution for analyzing low sulfur content in fuels, complying with ISO 13032 and many other sulfur-related international ...

Greater performance for high demands The KIT Plus range of wheel washing systems consists of a wide selection of mobile and stationary standard equipment for high-frequency applications. The modern drive-through systems are based ...

Greater performance for high demands The KIT Plus range of wheel washing systems consists of a wide selection of mobile and stationary standard equipment for high-frequency applications. The modern drive-through systems are based ...

Greater performance for high demands The KIT Plus range of wheel washing systems consists of a wide selection of mobile and stationary standard equipment for high-frequency applications. The modern drive-through systems are based ...

Gasboard-5020 emission gas analyzer is designed for measuring the emissions of all gasoline, LPG or CNG vehicles, it is developed based on the dual beam non-dispersion infrared (NDIR) principle to measure CO, CO2, HC, and electrochemical ...

Gasboard-5230 Online Automobile Emission Gas Analyzer Gasboard-5230 Automobile Emission Gas Analyzer adopts micro flow NDIR principle with independent intellectual property and international PCT (CN2018100767) to detect NO, dual channel ...

Gasboard-5260 Online Automobile Emission Gas Analyzer Gasboard-5260 Automobile Emission Gas Analyzer adopts micro-flow NDIR technology with independent intellectual property and international PCT(CN2018100767) to measure NO gas, NDUV ...

The RAASM pneumatic brake and clutch bleeder, with two or three chambers, is suitable for bleeding the hydraulic brakes and clutches of all vehicles. The bleeder can be operated in just a few minutes by one individual. The brake and clutch ...

The RAASM pneumatic brake and clutch bleeder, with two or three chambers, is suitable for bleeding the hydraulic brakes and clutches of all vehicles. The bleeder can be operated in just a few minutes by one individual. The brake and clutch ...

RAASM produces portable tyre inflators to check and adjust the pressure of any type of tyre. These have a 13 litre tank, also available as a version with automatic charging, or a 24 litre tank, only available as a version with standard ...

PTM500 automobile exhaust analyzer adopts the principle of non-spectrophotometric infrared absorption method. The concentration of HC, CO, CO, O 2, NO in automobile exhaust gas is measured by computer analysis. It can also be equipped ...

The compact and robust transmitter TCD3000 is recommended for precise, fast and sensitive measurement of (quasi-) binary gas mixtures. Due to the stainless-steel housing and the IP67 protection class, the unit can be used safely in ...

Pressure: 5 psi - 90 psi

Energy: 100-240V 50 / 60hz Air inlet interval: 87-123PSI / 6-8.5Bar Quality compressed air: 0.01ppm Recommended air inlet pressure: 44psi, 300kpa or 3Bar Nitrogen purity: 95-99% Nitrogen output: 42L / min (1.5cfm) 116psi Maximum ...

Energy: 100-240V 50 / 60hz Air inlet interval: 87-123PSI / 6-8.5Bar Quality compressed air: 0.01ppm Recommended air inlet pressure: 44psi, 300kpa or 3Bar Nitrogen purity: 95-99% Nitrogen output: 61L / min (2.1cfm) 116psi Maximum ...

Lifting height: 0 m - 2 m

Truck Power System is a revolutionary product that allows the repair of truck chassis and trailers to reach a new level. It reduces the usage of additional equipment for heating, gas/plasma cutting or welding for the repair of the chassis, ...

Lifting height: 100 mm - 1,100 mm

QB2000 is a mobile pulling bench ideal for all body shops.It is mobile ( on wheels ) and can be used also as a lift when there is no need of pulling.The time you need to put the vehicle on the bench and start working is about 10 minutes.In ...

Lifting height: 110 mm - 1,700 mm

QB3000 is a pulling bench ideal for all body shops. The time you need to put the vehicle on the bench and start working is about 10 minutes. In shrunk form it is 110 mm. So any automobile can roll on freely without any lifting equipment ...

The SEMTECH® DS+ is a modular Portable Emissions Measurement System (PEMS) for Heavy-Duty In-Use Testing (HDIUT). The base system is comprised of a Sample Conditioning System (or SCS), a Gas Analyzer (or GAS), and an Exhaust Flow Meter ...

The low-cost Automotive Particle Bench (APB™) is fully integrated into the Sensors’ Automotive Particle Analyzer (APA) as a complete turnkey, easy-to-use Periodic Technical Inspection (PTI) particle number measuring instrument. Patent ...

Sensors upgrades its SEMTECH® End Of Line (EOL) cart, integrating core SEMTECH® technologies into the basic system, which has been a standard for idle-state, loaded mode and transient emissions-based testing. SEMTECH® EOL simultaneously ...

Multi-Channel Power Analyzer LK601 Data Acquisition and Analysis The POWER-Analyzer LK601 was specially designed for use in electrical drive test benches. It helps to simplify development, analysis and EOL-Testing. Intuitive, precise ...

Used oil tank capacity: 25 l
Weight: 62 kg

New design for the Fluid Service AGC line, which thanks to the large Touch display and the adoption of a new graphical interface, allows the operator to make even easier and automatic any operation of the oil flow automatic transmission. The ...

Iam distribution channel Analogic, entry level user friendly Entry level price Worldwide compliant No certified range of product Complete with common optionals Not to be used on digital pti, installation data exchange – communication protocoll

The wireless diagnostic interface MaxiAP AP200 is a small interface adapter used to connect to a vehicle’s diagnostic connector (DLC) and connect with the Android or iOS device for vehicle data transmission, making your Android or iOS ...

Power per motor: 4, 4.7 kW
Braking force: 5,000, 6,000, 12,500 N
Maximum load: 4,000 kg

Ravaglioli test and diagnosis system for cars and light commercial vehicles sets today’s standards for vehicle testing. Developed to grant modularity and user-friendliness, it incorporates latest-generation equipment in conformity with ...

Advanced Driver Assistance System (ADAS) is becoming standard equipment on today’s new vehicles. These systems are designed to assist drivers to prevent collisions by displaying alerts, providing camera images or by taking instantaneous ...

Designed to guarantee safety and comfort while driving, the ADAS (Advanced Driver Assistance Systems) are ever more common in latest generation vehicles. Cameras, radars, LIDARs and sensors must be recalibrated when replaced, but even ...

Powder resistivity is an important property as it is different from solid bulk properties as well as single particle properties. If the powder are used to manufacutre products where particle state is maintained, controlling powder resistivity ...

Pressure: 0 bar - 12 bar

Robust, ergonomic and light tyre inflators for professional use in truck workshops. Approved for EC type, fully rubber-coated body and manometer, double valve connector for trucks and buses are ensuring high performances.