Burner accessories

Temperature: -60 °C - 350 °C
Pressure: 10 bar - 40 bar
DN: 15 mm - 200 mm

Precise working manual valve with a low actuation force. •Size: DN 15 - DN 150 •Pressure: PN 10/40 •Material: Stainless steel 1.4581 or 1.4408 Carbon steel 1.0619 •Temperature: Media temperature up to 350°C Special ...

Pressure: 150 mbar - 1,000 mbar
DN: 25 mm - 100 mm

Control valves for controlling continuously regulated burner processes, linear ratio between input signal and flow rate, control ratio 100:1, for gas and air, EC type tested and certified. Size: 2 to 3, DN: 25 to 100, valve seat: ...

Flame detector for flame signalling or for multi-flame control in conjunction with IFS 110/111IM, for intermittent operation, ionisation or UV control. For earthed or unearthed mains, mains voltage:110/120 V AC or 220/240 V AC.

Power: 800 W - 3,400 W

The ZMI PILOT BURNERS from ELSTER KROMSCHRÖDER, employ a single ignition or monitoring electrode ideal to safely ignite the gas burners with automated burned control units IFS/IFD or PFS/PFD. It can produce from 0.8 to 3.4kW of power, ...

Temperature: 537 °C

The STARFLOW circulation heater is engineered to heat a flowing gas stream to 1000°F (537°C). The circulation heater's 316L stainless steel chamber houses a small diameter sheathed element, which allows for quick response to both heat-up ...

Temperature: 650, 400, 175, 870 °C

Screw plug immersion heaters are ideal for direct immersion heating of liquids, including all types of oils and heat transfer solutions. Available in a variety of sizes, Watlow screw plug immersion heaters feature both WATROD round ...

Temperature: 175, 400, 650, 870 °C

Watlow flanged immersion heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, ANSI flanged immersion heaters are ideal for applications requiring higher kilowatts. Watlow flanged ...

The economizer ECO series is designed for exhaust gases thermal recovery. Incorporating the economizer ECO it is possible to achieve maximum efficiency. The Economizer ECO series easily enables reduction of costs relating fuel. Exhaust ...

Carbon steel economizer, for the preheating of the return oil of the installation. Exchanger installed at the chimney exit . Carbon steel economizer, for the preheating of the return oil of the installation. Exchanger installed at the ...

High shear, stand-alone, in-line mixer, suitable for processing liquid/liquid and liquid/gas dispersions. Optional aseptic mixing. Advantages •Aseptic aeration •Emulsification •Continuous mixing •PLC standard in all aseptic systems •Operator-friendly, ...

•4-20 mA analog transmitter without display •SIL2 capability for LEL, O2, CO, H2S, NH3, CO2 •Detects combustible, toxic or refrigerant gases and O2 •Available with electrochemical, infrared or semi-conductor sensors •Designed for ...

Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. ...

•Long range and wide field of view •Long life and durability •Full adjustable mounts •Fast response •Low maintenance required •Easily connects to system •Customization to suit your needs •Reliability and 5-year warranty The ...

Capacity: 316 l

The QDS (Quick Time Delivery System) static mixers can be delivered within a few days following your order and at very competitive prices. With QDS static mixers PRIMIX delivers the advanced technology of bespoke static mixers in standardized ...

PRIMIX custom made static mixers are fully customized inline mixers that are totally adapted to the use and process flow. The static tubular mixers can be dimensioned for almost all volume flows, densities, viscosities and substance specific ...

PMS mixing element • Standard screw, helical or spiral shaped mixing element. (comparable to Kenics design) • For static mixers with a diameter of up to approx. 160 mm • Suitable for basic mixing applications, liquids and gas.

Pillard Flame Scanners can operate with UV, pyrometric and flickering detection according to the kind of burners and is suitable for all types of fuels (gas, fuel oil, coal, acid gas and lean gas), and all industries. Easy to install Thanks ...

Pillard Packlight is a starter, igniter and a pilot for any kind of burners, it is designed for all fuels in all industries. Safe equipment The Pillard Packlight is equipped with a self-checking flame monitoring, and compliant with ...

Pillard PowerPack is a high energy ignition for industrial burner, designed for fuel gas, blast furnace and heavy oil burners. Maintenance free This Pillard PowerPack is very resistant and can ensure up to 1 million sparks without ...

Temperature: -20 °C - 60 °C
Pressure: 16 bar
DN: 200 mm

Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves are suitable for all gases according to DVGW ...

Early fire detection using multispectral infrared technology with highest possible suppression of false alarms Highly sensitive detector for the detection of flames. Specifications Spectral sensitivity: multispectral IR range Viewing ...

Early fire detection using combined UV and IR technology for a large application range with highest possible suppression of false alarms. Highly sensitive detector for the detection of flames. Specifications Spectral sensitivity: ...

Power: 0 kW - 10 kW

Description UL and C-UL Recognized-E177353 Features •Ratings and sizes other than those listed are available. •Brass, steel, or stainless steel screw plugs in 1″, 1 1/4″, 2″, and 2 1/2″ sizes. •Element supports in multiple element ...

Power: 3 kW - 200 kW

Description UL and C-UL Recognized – E177353 Features •Ratings and sizes other than those listed are available. •150# rating ANSI carbon steel flange. •Steel, stainless steel, copper, or incoloy sheathed elements. •Optional thermostat ...

Special burners designed to provide high efficiency combustion and reducing energy costs, by taking into account the process requirements. Safety, easy operation and maintenance are the most important specifications in their designs. They ...

INFRARED FLAME DETECTOR WATERTIGHT IP66 ENCLOSURE For industrial applications, indoors and outdoors, where fire can spread out rapidly due to the presence of highly inflammable materials (fuel, gas, paint, alcohol, paper, etc.) and where ...

Heat recovery implementation in your process will increase its efficiency, decrease energy consumption and save your money. Our Economizers are available with different materials to fit your application. Energy and fuels prices growth ...

Microprocessor based portable gas detector. Wide LCD display with 4 digits, with measurements unit and battery charge indication, acoustic alarm. For hydrocarbon gases (natural gas, LPG,...). Hold and auto-zero functions. Notes: ...

The PORTAFID® M3, and the PORTAFID® M3K are manufactured by Sewerin, and is a portable flame ionization detector that is ideal for use in observing underground gas lines. The units are precise and respond selectively to hydrocarbons. ...

Power: 9 kW - 18 kW

CSN® FLOW HEATERS FOR THERMAL PROCESS APPLICATIONS Typical Fields of Application are in the chemical, petrochemical, railroad and shipbuilding industries, in the machine and industrial equipment construction. CSN® circulation heaters ...

Power: 1 kW - 5 kW

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the ...

Description Glow igniters made of silicon nitride are normally rectangular in shape. Within our mold diameter of up to 400 mm various dimensions and batch sizes are possible. These igniters have a hot zone range of operation up to 1 ...

The alumina ceramic heater is manufactured by Innovacera, and is a ceramic heater equipped with an alumina and silicon nitride structures. It uses a high temperature co-ceramics technology used for efficient solution to various heating ...

Power: 500, 1,000, 2,000, 3,000, 5,500 W
Temperature: 200, 350, 140 °C
Pressure: 0 bar - 10 bar

These appliances are used to heat circulating fluids such as water, fuel oil, as well as air or gases in general at up to 15 bar max. They are fitted with a screw plug immersion heater and a safety thermostat. Fluid circulation heaters ...

Power: 2 kW - 24 kW
Temperature: 0 °C - 300 °C
Pressure: 0 bar - 15 bar

To heat water, fuel or oil circulating in pipework up to 15 bar max. These heaters are made of one or two DN 50 vessels in painted carbon steel, M45 screw plug immersion heaters, and a safety thermostat with automatic reset fixed at up ...

Power: 2 kW - 238 kW
Temperature: 0 °C - 300 °C
Pressure: 0 bar - 15 bar

To heat water, fuel or oil circulating in pipework at 15 bar max. Consisting of 1, 2 or 4 DN 80 vessels, in painted carbon steel, M77 screw plug immersion heaters and a safety thermostat with automatic reset, set at 115°C for water and ...

RFD-2000X is a UV/IR type Flame Detector with international certifications. Identify fire when both UV and IR sensors simultaneously detect the presence of a flame. Maximum 30 meters of detection range with a 90 degree cone of vision. ...

RFD-2000X-H is a UV/IR type hydrogen Flame Detector with international certifications. Identify fire when both UV and IR sensors simultaneously detect the presence of a hydrogen and hydrocarbon based flame. Maximum 30 meters of detection ...

RFD-2000 is a UV/IR type Flame Detector with international certifications. Identify fire when both UV and IR sensors simultaneously detect the presence of a flame. Maximum 30 meters of detection range with a 90 degree cone of vision. User ...

Description : The ACTE GAP-type heat recuperators are at the cutting edge of small-size waste heat boiler technology. Combining performance, reliability and compactness, heat recovery and optimizing energy are within reach of every industrial ...

Description : The GAP-type heat recuperators are at the cutting edge of small-size waste heat boiler technology. Thanks to the combination of performance, reliability and compactness, the GAP-type heat recuperators make waste heat recovery ...

Ultra High Purity Fluid Handling & Piping As microelectronics, nanoelectronics, photovoltaics, defense, pharmaceutical and aerospace facilities sometimes need UHP fluid handling and hook-up, Vegatec designs and provides gas and liquid ...