Pressure: 210 bar
Flow rate: 20 l/min
... The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. ...
DN: 0.375 in
Pressure: 10,000 psi
Flow rate: 7 us gal/min
... extended lengths of hydraulic hose. Operation: Controls surges by restricting flow if it exceeds 7 gpm. When flow subsides, valve reopens automatically. Has 3/8" NPTF male end to thread into return port of system ...
... The control valves with actuator are primarily used within the industrial plants to maintain operating conditions such as flow, pressure, temperature and liquid level by fully or partially opening or closing response to signals received ...
DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C
... sealing ring - Independent of variations of the inlet pressure / flow rate, the valve regulates a higher inlet pressure to a constant, lower outlet pressure - Valve controlled by its own medium - Pre-formed ...
VAG-Group
DN: 50 mm - 1,500 mm
Pressure: 400 bar
Temperature: -196 °C - 450 °C
... Trunnion mounted split body ball valves, double block and bleed function, for oil and gas standard and severe applications The FCT Split Body trunnion mounted ball valves have been designed for severe oil and gas applications, ...
Pentair Valves & Controls
DN: 700 mm - 3,500 mm
Pressure: 6 bar - 40 bar
... Epoxy-Polymer-Ceramic (EPC) Tried and tested technology for nominal widths between DN 700 and DN 3600, variants with weightloaded hydraulic actuator available. Drinking water certificate. ...
DN: 56 mm - 188 mm
Pressure: 30 psi - 200 psi
Temperature: 125 °C
... primary source of fuel is taken away. An intake air shut-off valve is a must for diesel engines which have even a possibility of encountering hydrocarbon vapors. The Intake Air Shut-off Valves from AMOT use the best available ...
AMOT
DN: 63, 90 mm
Pressure: 8, 10 bar
Temperature: 10 °C - 60 °C
... • Closing of the valve by diaphragm. • 100% factory tested. • Valve closing is produced when water flows to the control chamber. • The opening is done when the fluid of the control chamber is released ...
DN: 0.375 in
Pressure: 20 bar - 207 bar
... The Series 3000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves ...
BIJUR DELIMON INTERNATIONAL
... temperature variations. According to customers‘ information, valves are factory adjusted ready for operation and very simple to readjust if so desired. The patented up levelling system combined with compensated pilot ...
Blain Hydraulics GmbH
DN: 40 mm - 70 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
... bracket. The light weight aluminium material in combination with our well known butterfly valve design is a very attractive solution for a modern hydraulic system. Download the data sheet or contact us for further ...
DN: 25 mm
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 300 l/min
... Series VR5U08 Nominal Size Inch 1" mm 25 Maximum Flow gpm 80 lpm 300 Maximum Pressure psi 5000 bar 350 Mounting Flange ...
DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C
... Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, ...
YUKEN Europe Ltd.
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min
... Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds ...
... the majority of the features of the electro- hydraulic ARV without electronic controls. Product Details The ARV-H provides the core functionality of the industry-standard Olmsted Electro- Hydraulic valve ...
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 50 l/min
... pilot operated pressure control valve with electric proportional control and mounting interface in compliance with ISO 4401 (CETOP RP 121H) standards. — It is suitable to modulate the pressure in hydraulic ...
Duplomatic Oleodinamica
DN: 0.25 in - 2 in
Pressure: 255 bar
Temperature: -20 °C - 250 °C
... 2 pièces bail valve 1500lbs forged carbon Steel with full bore for Chemical and Pharmaceutical industries, petrochemical industries, hydraulic installation, heating and compressed air. For fluids at high pressure and ...
SFERACO
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
... Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from ...
Pressure: 0 bar - 300 bar
Temperature: -10 °C - 80 °C
Flow rate: 50 l/min
... CETOP 3 modular single-way flow regulating valve, not compensated. Type for regulation inflows ...
EUROFLUID HYDRAULIC SRL
Pressure: 8 bar - 250 bar
Flow rate: 40 l/min - 80 l/min
... Pressure Control Valve, Pressure Relief Valve, Safety Valve, Hydraulic Valve, Modular Valve, Sandwich Valve In the hydraulic ...
Camel Precision Co., Ltd.
DN: 15 mm - 150 mm
Pressure: 17.5 bar - 25 bar
Temperature: -10 °C - 350 °C
... V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled with pneumatic, hydraulic or ...
VALSTEAM ADCA Engineering S.A.
DN: 0.375 in
Pressure: 0.1 bar - 10 bar
Temperature: 0 °C - 60 °C
... The EURO filling valve is the simplest version of our cistern valves and can be used in any standard cistern. ...
DN: 15 mm - 200 mm
Pressure: 16 bar - 420 bar
... Metal-sealed Floating Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW/SW/Thread operation: product overview:Athena metal-seated floating ...
Athena Engineering S.r.l.
Pressure: 25 MPa
Temperature: -40 °C - 80 °C
Flow rate: 220 l/min
... trucks, open hydraulic systems, and single-acting cylinders. It has three functions: lifting, stopping, and lowering. The product is equipped with an adjustable relief valve to achieve reliable protection for the entire ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
the best suppliers