... New dual-blade cutting system specially designed for huge production volumes. It consists of a bearing structure that can house different, fully automated processes: Double cutting of rubber and reinforced ...
TECNOFIVE S.r.l.
... New dual-blade cutting system specially designed for huge production volumes. It consists of a bearing structure that can house different, fully automated processes: Double cutting of rubber and reinforced ...
TECNOFIVE S.r.l.
... New dual blade cutting system specially designed for use by production shops where profiles are jointed by means of a splicing film. It makes it possible to rework a profile previously jointed improperly, ...
TECNOFIVE S.r.l.
Maximum cutting height: max 20.0 mm
Cutting speed: 1,200 m/s
Repeatability: 0.05 mm
... ◦ Electric oscillating knife ◦ Pneumatic oscillating knife ◦ Power rotary knife - round/polygons ◦ Creasing tool - 3 wheel sizes 55mmd, 35mmd, 30mmd ◦ Marker pen ...
Okkura Limited
Maximum cutting height: 20 mm
Cutting speed: 1,200 mm/s
Repeatability: 0.05 mm
... ◦ Electric oscillating knife ◦ Pneumatic oscillating knife ◦ Power rotary knife - round/polygons ◦ Creasing tool - 3 wheel sizes 55mmd, 35mmd, 30mmd ◦ Marker ...
Okkura Limited
Maximum cutting height: 20 mm
Cutting speed: 1,200 mm/s
Repeatability: 0.05 mm
... ◦ Electric oscillating knife ◦ Pneumatic oscillating knife ◦ Power rotary knife - round/polygons ◦ Creasing tool - 3 wheel sizes 55mmd, 35mmd, 30mmd ◦ Marker ...
Okkura Limited
X travel: 600 mm - 2,000 mm
... ANR is a sturdy and accurate saw for stone slabs: •Special beam design to attain a perfect cutting precision; •Water tank with built-in recycling pump for blade cooling; •Optional device to perform ...
... calculations in busbar machining? Then you can rely on the precise and quick cutting of copper rails by the S12 from ALFRA. The hydraulically operated high-performance device is cutting rails with the dimensions 125 X ...
Operating pressure: 6 bar - 8 bar
Overall length: 14,717 mm
Maximum width: 3,437 mm
... length - Saw speed 2.850 rpm. - Saw Diameter 550 mm - Mitsubishi PLC control system - Reöote service support - Adjustable parameter - Automatic profile recognition - Automatic lubrication system Design - ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Operating pressure: 6 bar - 8 bar
Overall length: 6,600, 6,554 mm
Maximum width: 770, 989 mm
... quality - V and dovetail cutting capability - Profile fixing pistons - Easily adjustable cutting depth - Support table with two-sided profile support system Saw - 2 Ø 260 mm saws ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Operating pressure: 6 bar - 8 bar
Overall length: 6,655 mm
Maximum width: 912 mm
... profile supports - 2 pieces top press pistons for fixing profile - Profile support table with manual measuring system - Left profile support table - Safety cover Saw - Ø 400 mm saw - ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Operating pressure: 6 bar - 8 bar
Overall length: 525, 825 cm
Maximum width: 113 cm
... controlled serial cutting machines designed for the strait or angular cutting operations of the large size of PVC or aluminium materials in manual or automatic modes by means of Ø 420 mm of saw ...
Cutting speed: 34 m/min
Overall length: 1,480, 620 mm
Maximum width: 1,030 mm
... Automatic cutting off machine is widely for cut PVC film, PET sheet, PC sheet, Clear PP Sheet and other poly films. • CNC Control Systrem: This automatic cutting machine equips CNC ...
Hefei Better Technology Co., Ltd.
Cutting speed: 80 m/min
Overall length: 1,500 mm
Maximum width: 1,530 mm
... roll to sheet cutting off machine is widely for cut EVA foam films, PVC film, PET sheet, PC sheet, Clear PP Sheet and other poly films. • CNC Control Systrem: This automatic cutting machine ...
Hefei Better Technology Co., Ltd.
Power supply: 200 V
... Function : Automatic cutting and one side stripping for wire, cable, flat wire, soft copper bar, protective sleeve, and other PVC hose • Display : 7 inch touch screen • Cutting length : 1mm-9999999.99MM • Cutting ...
Hefei Better Technology Co., Ltd.
Tube diameter: 2 in
... Guillotine cutting machine - UPG 10 Guillotine for industrial hoses •up to 2” (max. OD: 75 mm) •Pneumatic Drive •L x W x H (mm) : 1810 x 325 x 800 ...
Weight: 8 kg
... For decades, hose cutting machines from UNIFLEX have been synonymous with the highest precision and robustness. The solid and compactly built tools are characterized by their qualitatively impeccable cutting ...
Weight: 240, 215 kg
... 150 and EMI 200 industrial hose cutting machines from UNIFLEX are available for cutting of up to 6” hoses (EMI 150) and up to 8” hoses (EMI 200). Their compact dimensions and robust design make these ...
... Perforating and cutting or rewinding of shrinkable sleeves or paper labels. The SLEEVECUT is a finishing machine primarily dedicated to shrink sleeve labels to perform the following operations : - sheet sleeves, - ...
... production speed : 180m/min • Up to 8 lanes of labels • Rotary transverse cutting • Integrated sides cutting • Delivered in vertical piles • Counting APPLICATIONS • Soft pack for cigarettes • Labels for bottles MATERIALS • ...
Weight: 1.7 kg
... ultrasonic hand cutters Optimised cutting process Cutting cycles can be shortened with a fast cutting speed and simultaneous edge sealing. The cutting process is triggered ...
Weight: 1.7 kg
... hand cutter. Optimised cutting process Fast cutting speed combined with edge sealing reduces the cutting process. An ergonomic button on the hand grip triggers the cutting process. Adjustable ...
Weight: 4 kg
... food items. The SFC20 features custom-made, high-quality cutting horns with an acid-resistant, alkali-resistant or non-stick coating. Thanks to the low build-up of force, the ultrasonic blades slide effortlessly through ...
Y travel: 120 mm
Z travel: 25 mm
Maximum width: 545 mm
... ZONE- CUTTING The new functionality “zone cutting” allows for setting feed rate or cutting force individually for single sections of the specimen for one cutting operation. Material ...
QATM
X travel: 210 mm
Y travel: 80 mm
Z travel: 80 mm
... 20 years, QATM‘s innovative precision cutting machines have been setting new standards and benchmarks in materialographic sample preparation. What makes our cutting machines so special? ...
QATM
Y travel: 125 mm
Maximum width: 830 mm
Height: 640 mm
... 230 is a wet abrasive cut-off machine with fine dynamic, manual wheel movement into samples up to Ø 110 mm. The spacious cutting chamber allows various clamping variations. The solid aluminium design of the cutting ...
QATM
... Automatic Rolling and cutting machine for bandages for medical and pharmaceutical applications (surgical dressing materials). For elastic and non-elastic bandages up to 300 mm width. • Quantity of bandages simultaneously: ...
... Automatic Rolling and cutting machine for plaster bandages for medical and pharmaceutical applications (surgical dressing materials). For elastic and non-elastic bandages up to 300 mm width. Quantity of bandages simultaneously: ...
... Automatic Rolling and cutting machine for sleeves (tubular bandages). Quantity of outlets: 1 For bandages from 40 up to 200 mm width. Lengths to be chosen from 2 meters up to 20 meters on roll. Rolls up to 200 mm. ...
Cutting speed: 70 m/min
Overall length: 1,000 mm
Maximum width: 600 mm
... Cut-to-length machine Cutting cycle time 4 sec. Machine made from stove-enamelled sheet steel. Four castors. Accommodates cable diameter min. Ø5mm, max. Ø40mm. Measuring error ±0.5% for cables ...
Tube diameter: 273 mm - 406 mm
... TTNG406 is a machine for the orbital cutting of pipes and pipelines, especially those of high thickness and whatever the material considered. This solution is used for cutting, beveling, straightening ...
PROTEM
... The machining capacity of the TTNG610 is 406.4 mm (16") to 610 mm (24"). Clamshells dor Demanding Construction, Maintenance, Dismantling Projects ...
PROTEM
... TTNG219 is a machine for orbital cutting of pipes and pipelines, especially those of high thickness and whatever the material considered. This solution is used for cutting, beveling, straightening and ...
PROTEM
... The M700ST Small Tube Cutter Module utilizes Eraser’s rotary style cutter head that can cut many grades of tubing up to 1/2” (12.7mm) OD. The M700LT Large Tube Cutter Module is ...
The Eraser Company
Tube diameter: 5 mm
... Model MMC71 Multi-Material Cutter is capable of cutting a wide range of materials, including flat material up to 3.3” inches wide, tubing up to 3/16” OD, and wire up to 14 AWG stranded or 16 AWG solid. The MMC71 works ...
The Eraser Company
Tube diameter: 1 in
... diameter. The unit utilizes dual electrical finger switches to activate the blade via an air cylinder. Model HCA20 incorporates a guillotine style blade to provide clean, square cutting of a variety of ...
The Eraser Company
Tube diameter: 25 mm - 2,000 mm
... CUT WITH KNIFE, ideal for PE pipes (polypropylene). This type of machine effects the cut without material removal and thus generates neither dust nor chips nor noise. Traditional blocking vices or system for universal ...
Maximum cutting height: 25 mm
Cutting speed: 1 m/s
Power supply: 230 V
... height: 870–900 mm, adjustable
SAMEX
Laser power: 130 W
Overall length: 300 cm
Power supply: 230 V
... Manual end cutter enables quick cutting of single layers. The machine head is moved on a trackrail, which length (up to 300 cm) can be adjusted to the width of the table. High-speed engine can handle ...
SAMEX
Maximum cutting height: 9.5 cm
Minimum cutting height: 5 cm
Laser power: 370 W
... Precise, light and handy cutting machine, perfect for accuracy and cutting small elements. Narrow blade is irreplaceable in precise cutting, this machine ...
SAMEX
Repeatability: 0.1 mm
... feeding cutting machine CNS-KCMP-2518 is designed for continuous, high-volume cutting and engraving. Its automatic feeding system advances material across a large work area to reduce manual handling and ...
Y travel: 400 mm
Z travel: 400 mm
Cutting speed: 38 m/s
... Diamond
Wire
Saw for Sapphire & Superhard Materials
SGSM 40 – Swinging Endless Diamond
Wire
Cutting MachineWhen
cutting
sapphire, ...
... Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the ...
Jinan Hensgrand Instrument Co.,Ltd
... precise specimen cutting machine is suitable for the precise cutting of various hard materials. It is especially suitable for the precise cutting of all kinds of small metal, non-metal ...
Jinan Hensgrand Instrument Co.,Ltd
... metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the Metallographic or lithofacies structure. It has cooling system so as to clear up the ...
Jinan Hensgrand Instrument Co.,Ltd
... is a thin-veneer cutting saw designed for irregular stone shapes. Equipped with a single diamond blade and a single cutting cycle, it is suitable for operators starting in veneer production ...
... 2AM is designed for cutting and mitering stair treads, corner pieces, drip edges, handrails and pool edges. In a single operation one motor performs sizing cuts while a second motor executes the miter cut at an inclined angle. The machine ...
... Overview
The MCN range of automatic
cutting
machines delivers precision
cutting with a two-step
cutting technology engineered to minimize vibrations and ensure consistent finishes.
Applications ...
... Product description
The miter making
machine MIP-1200 is designed for precise and efficient production of technical stair treads. Equipped with up to three adjustable
machining motors and a servo-motorized guide ...
X travel: 240 mm
Y travel: 200 mm
Z travel: 220 mm
... Product Details: ACM7160S full-automatic sample cutting machine is a large-scale automatic metallographic cutting machine, which adopts Siemens programmable controller, with very high ...
Overall length: 467, 790 mm
Maximum width: 435, 690 mm
Height: 353, 800 mm
... metallurgical laboratory for cutting metal materials.Manually cutting machines are safe, reliable and easy to operate also equipped with cooling system. ...
Y travel: 200 mm
Cutting speed: 0.01 mm/s - 3 mm/s
Laser power: 1,000 W
... Model: HSCM-5000B - Feed speed: 0.01~3.00 mm/s (adjustment step is 0.01) - Cutting saw blade speed: 500~5000rpm - Maximum travel Y-axis: 200mm - Cutting blade size: 200×1x32mm - Cutting ...
... With the WOLFANGEL® Vario Cutter it is possible to cut the fibres with a speed up to 20 m/sec. The length of the fibres can be changed during the cutting process at full speed. With this cutter it is ...
... • Cutting at 90º • 4,0 HP Motor • 500 mm balscrew servomotor feeder • Unlimited strokes • 2x pneumatic vertical clamping cylinders • 2x pneumatic horizontal clamping cylinders • Twin pressure LOW/HIGH system for clamping security • Cutting ...
the best suppliers