DN: 10, 8, 0.25, 0.375, 0.5 mm
Pressure: 150 psi - 300 psi
Temperature: -10 °C - 60 °C
... Press fit seat valves (available in HP and UHP grades). These valves use smaller sized seats made of erther PCTFE, PFA or Polyimide that are tightly pressed to fit the valve body. In general, these valve ...
HAM-LET
DN: 40 mm - 300 mm
Pressure: 17 bar
Temperature: 50 °C
... suitable for systems that include dry pilot lines with closed pneumatic fusible plugs. The valve is closed as long as the dry pilot line is pressurized. It opens in response to a pneumatic ...
... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete with 1 or 2 Microswitches in each ...
DN: 40 mm - 100 mm
Pressure: 73, 145, 116 psi
Temperature: 0 °F - 275 °F
... resistance Balanced lower shaft design prevents hydraulic blockage and allows dual flow direction Heavy-duty bolted flange offers secure insert installation and removal Insert servicing requires no compressed air Compatible ...
APV
DN: 25, 50, 16, 40 mm
Pressure: 4.5 bar - 7 bar
Temperature: 100, 80, 50 °C
... The low-priced mini vacuum gate valve is well suited for industrial and R&D applications. It is often used in pipings of industrial systems. ...
VAT Vakuumventile AG
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series - Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA Series ...
DN: 0.063, 0.125 in
Pressure: 0 psi - 300 psi
... Beswick’s stem actuated valve is available in 2-way normally opened, 2-way normally closed, and 3-way normally closed configurations. Working Pressure Range: The pressure range of the valve is 0 to 250 psig with a ...
DN: 0.25 in - 1.5 in
Pressure: 0.5 mbar - 3,000 mbar
Temperature: -5 °C - 60 °C
... Servo-controlled 3-way vacuum valves These 2-position, 3-way valves feature pneumatically activated conical shutters. They can be used normally either closed or open. They are recommended in all the ...
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 160 °C
... SISTO-CY ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to ...
DN: 6 mm - 150 mm
Pressure: 20 bar
... Multiport valve blocks are often installed when complex solutions in process engineering systems are required. Compared with welded designs, these valves require minimal space and are optimised to prevent deadleg. The ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm
Pressure: 6 bar
... Pneumatically actuated diaphragm valve with metric plain spigot ends for solvent welding, Double Acting. The CM/CP is a pneumatically actuated valve ...
FIP - Formatura Iniezione Polimeri
DN: 12, 15 mm
Pressure: 6 bar
... The CM/CP is a pneumatically actuated valve with a compact structure and high flow capacity. The CM/CP is actuated by a dry running piston that can be actuated by all fluids or gases provided they are ...
FIP - Formatura Iniezione Polimeri
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
... Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...
A&T Fluid solutions
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed. We suggest the mounting directly on the cylinder’s supply ...
A&T Fluid solutions
DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
... The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do not interfere with ...
A&T Fluid solutions
DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C
... controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Positioner with mounting acc. to NAMUR standard Accessories - Metal bellows Limit switch Position feedback Manual ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C
... - IO-Link - Integrated process controller IPC Pneumatic and electro-pneumatic positioner type 8047 - 2-wire - Ex version Accessories - Metal bellows Limit switch Position feedback Pilot valve . ...
Schubert & Salzer Control Systems GmbH
DN: 8 mm - 80 mm
Pressure: 16 bar - 40 bar
Temperature: -30 °C - 170 °C
... Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral ...
Schubert & Salzer Control Systems GmbH
Pressure: 15 psi - 150 psi
Flow rate: 220, 250, 140 l/min
... The MEV-2 threaded exhaust valve provides air flow of scfm @ 50 psig; 9scfm @ 100 psig (exhaust rate); 220 l/min @ 6 bar. Force at 50 psig, opens after approx 5 psig drop; and force at 3.5 bar, opens after approx. 0.35 ...
Clippard
DN: 0.125, 0.25 in
Pressure: 15 psi - 150 psi
Flow rate: 0 l/min - 1,600 l/min
... J-Series Exhaust Valves offer a variety of design features and provide fast response times and high flow with 1/8” and 1/4” NPT ports. This compact poppet type valve is constructed of brass and is 100% tested to assure ...
Clippard
Pressure: 100, 50 psi
Temperature: 0 °C - 110 °C
Flow rate: 190, 110 l/min
... The MAV series are #10-32 ported valves that change their flow path when the stem is depressed or released. The 2-Way and 3-Way valves are offered in both Normally-Closed (not passing) or Normally-Open (passing) versions. ...
Clippard
DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C
... : - Valve body: - 1.4404 (SST 316L) Valve stem: - 1.4542 (17-4 PH) Seal: - HPU Dimensions: - Height - Normally closed: 154 mm Normally open: 99,5 mm Diameter: - 90 mm Orifice: - 2,0 mm Maximator offers various ...
Maximator GmbH
DN: 155 mm
Pressure: 2 bar - 10 bar
Temperature: -73 °C - 80 °C
... Maximator offers various compressed air operated valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen ...
Maximator GmbH
... Maximator offers various compressed air operated valves (1/4" to 1") as well as check valves for hydrogen refueling systems and generally for use in hydrogen applications. Hydrogen ...
Maximator GmbH
DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C
... medium. All actuator parts (except seals) are made from stainless steel. The filling valve is available in pneumatic design F40 (and electrical design F60). The pneumatic version is available with Normally ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0.125 in - 1 in
Pressure: 2.5 bar - 7 bar
Temperature: 0 °C - 60 °C
... The GEMÜ Q40 2/2-way pinch valve has a stainless steel piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 35.69 mm - 38.1 mm
Pressure: 2 bar - 7 bar
Temperature: 0 °C - 60 °C
... The GEMÜ Q30 2/2-way pinch valve has a plastic piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 0.25 in
Pressure: 0 bar - 400 bar
Flow rate: 8, 4, 2 l/min
... Valve is controlled by compressed air acting on piston in the cylinder. Valve is kept open by the spring force. When pilot pressure is applied the valve ...
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
... and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally open, which means the supply port is open ...
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
... moves and changes the pneumatic state. The signal pressure and pneumatic circuit are completely isolated from each other. The pneumatic circuit is normally closed, which means the supply port ...
DN: 8 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 80 °C
... 3 PIECES F/F BALL VALVE (58183) WITH ALUMINIUM PNEUMATIC ACTUATOR (50800) ...
DN: 25 mm - 104 mm
... PNEUMATIC SEAT VALVE, 2 WAYS (L SHAPE) - STAINLESS STEEL 316L ...
... juice production, with TORK hygienic actuators human helath is under control. Technical Features Max. Air Pressure: 700 kPa (7bar) Min. Air Pressure: 400 kPa (4bar) Temperature Range: -25C, +90C Body Product: ...
SMS-TORK
Pressure: 16 Pa
Temperature: -10 °C - 180 °C
... Oil, Petrol, Alcohol, Hydraulic liquids, Salt solutions, Organic solvents, Acids PP1020 Series Normally Closed ; PP1021 Series Normally Open Advantage of TORK Pneumatic Piston Valves ● Less pressure ...
SMS-TORK
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... 3/2 Way pneumatic piston valves . Connection : 1/2"-2" ...
SMS-TORK
DN: 8, 6, 4, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... flow type of tube size : ø4, ø6 and ø8mm were newly added. Enables to ensure larger flow rate with same tube size as conventional type. ...
DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best suited for use ...
DN: 10, 8, 12, 6, 4 mm
Pressure: 0 MPa - 0.6 MPa
Temperature: 0 °C - 60 °C
... Pressure control valve saves compressed air consumption. In driving an actuator under high pressure, compressed air can be saved by use of the pressure controller ...
DN: 0.375 in
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 84 °C
... Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the ...
DI NICOLA INFINAM
DN: 40 mm - 1,200 mm
Pressure: 2.5 bar - 16 bar
Temperature: -10 °C - 120 °C
... and long service life. Where butterfly valve? Hot and cold water lines. Acid-alkali, base and salty conditions. Viscous liquids. Power génération industry. Waste water plants. Air conditioning technology. Pneumatic ...
DI NICOLA INFINAM
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
... Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure ...
DN: 100 mm - 1,000 mm
Pressure: 0.5 bar - 10 bar
Temperature: -40 °C - 800 °C
... Flowrates‘ welded square section knife gate valves are specifically designed for the precise control of solids, powders, and bulk materials. Their unobstructed flow design ensures smooth and continuous discharge, reducing material build-up ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...
DIVATEC,SL
DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
... • Materials -PVC-U, PP • Together EPDM, FPM • PN10 • Step of the ball in T or L • Hand lever or with pneumatic actuator or with electric motor 230V / 24V • Gluing, soldering or socket connections, with DIN / ANSI ...
DIVATEC,SL
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
... connections, PE solder, solder socket, BSP or NPT female threads and flanges. • Possibility of automation with electric actuator 230V / 24V or pneumatic actuator DA, NC, NA Advantage • Seat, torus and ball, interchangeable • ...
DIVATEC,SL
the best suppliers