Rigid lathe

Diameter: 0 mm - 2,600 mm
Spindle speed: 1.4 rpm - 315 rpm

... cranes and forklift trucks Heavy-duty column with wide, hardened guideways hydraulic clamping of cross traverse Rigid guide construction ensures maximum rigidity and accuracy of the vertical boom Spindle ...

Diameter: 0 mm - 2,300 mm
Spindle speed: 0.5 rpm - 200 rpm

heat-treated machine bed made of premium HT250 cast-iron large, induction-hardened and precision-ground rectangular guides with synthetic coating ensure optimum sliding and damping properties high-precision preloaded ball screws from ...

Diameter: 800, 700 mm
Spindle speed: 0 rpm - 300 rpm

Rigid, one-piece column-type machine frame made of premium cast-iron Vertical design saves time: Workpieces with large diameters can be loaded and unloaded quickly and safely Large box-ways, hardened and ground With ...

Diameter: 178 mm - 610 mm

... model. - Headstocks prepared for assembly of hydraulic indexing chuck to finish the coupling in a single set up, CIH model. - Rigid design capable of performing threading ensuring an excellent quality. - Heavy duty vertical ...

Diameter: 0 mm - 356 mm
Spindle speed: 0 rpm - 4,000 rpm

... and rigid tapping. Standard toolholder kit included with BOT or Hybrid turret. The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme ...

Diameter: 0 mm - 305 mm
Spindle speed: 0 rpm - 4,000 rpm

... monitor, memory lock keyswitch, spindle orientation, USB port and rigid tapping. Standard toolholder kit included with Hybrid turret. The Haas ST Series high-performance turning centers were designed ...

Diameter: 0 mm - 457 mm
Spindle speed: 0 rpm - 4,000 rpm

Double-Spindle CNC Lathe with Y Axis has a maximum capacity of 457 x 584 mm (18" x 23"), 806 mm (31.75”) swing, ±50.8 mm (±2.00") Y-axis travel. The vector drive of the main Spindle is 22.4 kW (30 hp) at 4000 revolutions-per-minute, ...

Diameter: 256 mm
Spindle speed: 4,800 rpm

A rigid and reliable machine built to last - Cast iron frame designed with Finite Element Analysis (FEA). - True 45 degree slant bed. - State-of-the-art brushless AC servos - Double-nut pre-tensioned ball screws. - ...

Diameter: 32 mm
Spindle speed: 100 rpm - 6,000 rpm

Diameter: 0 mm - 3,200 mm
Spindle speed: 200 rpm - 450 rpm

Pietro Carnaghi presents model AC vertical turning centre. It has a compact design, and a very sturdy thermo symmetrical structure. The column is fixed to the table base. A combination of all these features results in a sturdy structure ...

Diameter: 0 mm - 18,000 mm
Spindle speed: 0 rpm - 60 rpm

Pietro Carnaghi introduces a large vertical lathes for wider operations. The AS Series vertical lathe is designed of a single column of mm 6500 - mm 18000 diameter and extremely rigid ...

... over the years in precision Machine Building. We wanted to develop a Machine which has a good Chip Producing Capacity and is rigid and accurate enough to perform in the toughest of conditions. With MT 15 we believe we ...

Diameter: 1,200, 2,500, 2,000, 1,600 mm
Spindle speed: 100 rpm - 200 rpm

Lymco RAL vertical turning center focus on general turning needs of everyday shops. Designed with octagonal ram and hydrostatic table, the RAL vertical lathe can handle deep cuts while enjoy a good clearance ...

Diameter: 300 mm
Spindle speed: 50 rpm - 6,000 rpm

... perfect high-precision machine for complex applications, also suitable for hard turning Our machines are manufactured around a rigid structure, and can be modified to suit your specific area of use. A number of different ...

Diameter: 0 mm - 320 mm
Spindle speed: 0 rpm - 4,000 rpm

6inch Compact Horizontal Turning Center - Ø320 x 303mm wide machining area with compact design - DOOSAN’s reliable spindle with highly durable bearing structure - Highly rigid roller type LM guideways ...

Diameter: 315 mm
Spindle speed: 0 rpm - 4,000 rpm

Machine highlights Your benefits Clearly structured and ergonomic work area concept Rigid mineral cast bed in 45° monoblock design for high accuracy Work spindle with belt drive for high torques Bar capacity ...

Diameter: 0 mm - 60 mm
Spindle speed: 8,000 rpm

Super-high precision Maintaining stable dimensional accuracy even over long-term operation thanks to the rigid bed with low center of gravity Thermal displacement (at cold start): ø 2.0 μm Circularity: 0.5 μｍ ...

Diameter: 0 mm - 313.7 mm
Spindle speed: 5,000 rpm

... through-tool coolant, bar feed and chip conveyor interfaces, three position stack light, PCMCIA memory card, USB Capability, rigid tapping and many others including state-of-the-art machine crash protection.

Diameter: 315, 250 mm
Spindle speed: 0 rpm - 2,800 rpm

The TNA 500 from TRAUB is a heavy-duty Computer Numerical Control (CNC) tuning machine with optional clamping chunk sizes that can reach up to 315 millimeters. This machine, with a 100-millimeter quill stroke for a "tailstock", is equipped ...

Diameter: 0 mm - 400 mm
Spindle speed: 25 rpm - 2,500 rpm

The 2SP-V40 is a twin-spindle, four-axis vertical lathe that is accurate in all cuts. The vertical box column supports higher RPMs and the deepest cuts. The square saddle and cross slideways are precise for more parts. ...

Diameter: 0 mm - 400 mm
Spindle speed: 2,500 rpm

... single spindle series of vertical turning lathes. They deliver steady machining of thin and odd-shaped workpieces. The structure of the design also contributes a lot, and with their box-type base and column and rigid ...

Diameter: 0 mm - 165 mm
Spindle speed: 6,000 rpm

Features 60° slanted one-piece rigid bed structure Realization of high-precision product processing through the reduction of combined thermal displacement Decrease in belt damage and vibration in the main shaft by ...

Diameter: 370, 480 mm
Spindle speed: 5,000, 4,000 rpm

Key Features Rigid and robust monoblock construction Live tool turret 12 stations (M) Very high quality of surfacing Positioning accuracy and high repeatability High speed electro spindle and rigid headstock Hydraulic ...

Diameter: 100 mm
Spindle speed: 12.5 rpm - 11,200 rpm

... advantages of both high efficiency and economy. They feature extremely rigid structure and superior precision in rough and finish machining. At the heart of this machine is a strong and rigid headstock ...

Diameter: 1,100 mm

The oil country-3M is a unit manufactured by XYZ company. It has a 80 HP spindle ans a 1000 mm 4 jaw chuck. Further, it has either 310 mm or 420 mm spindle bore. The device's tailstock quill travel is 300 mm and its spindle nose is ...

Diameter: 350 mm
Spindle speed: 0 rpm - 5,000 rpm

Universal 60° slant bed lathe monobloc base Rigid linear guide with preloaded saddle Cartridge spindle with super precision ball bearings, lubricated for life. Chuck and tailstock (manual, pneumatic ...

Diameter: 0 mm - 7,300 mm
Spindle speed: 0 rpm - 250 rpm

... machine frame from cast iron specified for highefficient machining Ram is designed for the most efficient machining Extremely rigid table bearing using hydrostatic guiding principles Precise table positioning (C-axis) ...

Diameter: 80 mm
Spindle speed: 0 rpm - 7,000 rpm

The fastest model on the market for machining parts sized up to 120mm. The rigidity of the bedframe and the short strokes of the guides, at a low coefficient of friction, deliver record-breaking mass production times (with accelerations ...

Diameter: 500 mm
Spindle speed: 0 rpm - 5,000 rpm

Integrated, ultra-durable bed Hi-TECH 200 has an integrated bed frame to minimize heat distortion, and the precision-polished wide guide surface and the ultra-durable bed absorb the vibration sufficiently, to assure high degree ...

Diameter: 900 mm
Spindle speed: 0 rpm - 1,800 rpm

Integrated, ultra-durable bed Hi-TECH 700 has an integrated 45-degree angle bed frame to minimize heat distortion, and the precision-polished wide guide surface and the unique bed design absorb the vibration sufficiently, to ensure ...