Meeting the benchmark: the BioBasic Bionix is an online biomethane analyzer that delivers one reading every second for CH4, CO2, O2 and H2S. It monitors biomethane quality after biogas upgrading and at the grid injection point. Swings that fall between two values of a process gas chromatograph show up immediately.
Proven in the field: for six days, the BioBasic Bionix ran alongside the process gas chromatograph of a biomethane grid injection plant. The mean deviation was below 0.3 vol.% for CH4, around 0.1 vol.% for CO2 and around 0.01 vol.% for O2. The BioBasic Bionix showed changes about 11 minutes earlier. The lead depends on the GC cycle and the sample line. H2S was not part of the comparison.
Typical applications:
- Biomethane grid injection plants and renewable natural gas (RNG) plants
- Gas grid transfer stations: fast, process-side complement to the custody-transfer process gas chromatograph
- Biogas upgrading: immediate feedback for adjusting the upgrading unit
- Power-to-gas and SNG
What operators get:
- One reading every second instead of one value every few minutes
- Considerably less expensive than a process gas chromatograph
- Wear-free optical measurement: NDIR dual-beam for CH4 and CO2, NDUV with reference detector for H2S
- Automatic, error-monitored calibration with zero and test gas
- Colour touch display with one tile per gas, trends and plain-text fault messages
- Data logging to USB stick, GasAnalyzer Connect app via Bluetooth
- No sample conditioning for dry biomethane; optional pump-free version from 60 mbar inlet pressure
- ATEX-certified flame arrester at the sample gas inlet. The analyzer itself is not approved for hazardous areas and is installed in an air-conditioned indoor room.
Technical data (excerpt):
- Measuring ranges: CH4 90–100 vol.%, CO2 0–10 vol.%, O2 0–30 vol.%, H2S 0–100 ppm
- Expanded uncertainty (% of full scale): CH4 0.2, CO2 0.5, O2 0.3, H2S 0.5
- Measurement interval: 1 s, continuous; no readings during calibration (approx. 4 min per cycle)
- Interfaces: 4–20 mA and RS232 as standard; Profibus DP, Profinet, EtherNet/IP and Modbus TCP as options
- Ambient conditions: 20–30 °C, air-conditioned indoor installation only
- Housing: wall-mounted, 400 × 600 × 200 mm, IP 54, 18 kg
Data sheet (as of 10.11.2026) and brochure are available under Catalogs.