- Electricity - Electronics >
- Electronic Component >
- Amplifier >
- IPG Photonics
IPG Photonics amplifiers
Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
External Amplifier IMA2 DMS External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for force sensors with strain gauge full bridge For direct connection of strain ...
MEGATRON Elektronik GmbH & Co. KG
Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
External Amplifier IMA2 R External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for linear and rotary potentiometers For direct connection of potentiometer (linear ...
MEGATRON Elektronik GmbH & Co. KG
Voltage: 0 V - 10 V
Current: 0 A - 20 A
External Amplifier IMA2 LVDT External amplifier with analogue output 0…5 V, 0…10 V, ±5 V, ±10 V, 0…20 mA, 4…20 mA for inductive displacement sensors For direct connection of inductive linear sensors Internal ...
MEGATRON Elektronik GmbH & Co. KG
Voltage: 100 V - 240 V
Frequency: 60, 50 Hz
The HD2050.20 is a digital signal amplifier, designed to work with HD2050 and HD2050.30 sources to obtain from these maximum acoustic performances. The HD2050.20 amplifier incorporates a white / pink ...
Voltage: 12 V - 24 V
Current: 50 mA
High Performance Single/Dual Digital Display Fiber Optic Amplifiers The BF5 series fiber optic amplifiers are available in single and dual display models. The units feature 5 different response speed ...
Autonics
Voltage: 12 V - 24 V
Current: 40 mA
Digital Fiber Optic Amplifier Communication Converters The BFC fiber optic amplifier communication converters allow simple management and configuration of BF5 series fiber optic amplifiers ...
Autonics
Voltage: 12 V - 24 V
Current: 45 mA
Digital Display Fiber Optic Amplifiers The BFA series fiber optic amplifiers feature high-speed response times and various functions to provide reliable detection of small or fast moving targets. The ...
Autonics
Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz
Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...
SENECA | Automation Interfaces
Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz
Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...
SENECA | Automation Interfaces
Voltage: 12 V - 24 V
Frequency: 0 Hz - 400 Hz
Description: - On/Off sensor digital amplifier, 1 relay output Power supply: - 115 / 230 Vac ±10%, 50 - 60 Hz Insulation: - 4.500 Vac (power/input/output) Input: - 1-CH free contact, reed, NPN 2/3 wire @ 12/24 ...
SENECA | Automation Interfaces
Voltage: 20 V - 30 V
Description Four switching points •Four switching points NO / NC programable •Measured value displayed by amplifier APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •Four switching points either NO / NC ...
Voltage: 20 V - 30 V
... Output of the analog value as current or voltage •Analog value with cable breakdown protection •Measured value displayed by amplifier APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •One switching point either ...
Voltage: 230 V
Current: 300, 3 mA
Description External Amplifier •NO / NC •Different outputs available •Switching-on and switching-off delay •10...30 V DC / 230 V AC APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •NO / NC PNP switching ...
Frequency: 2 MHz
... gauge bridge amplifier is a differential high speed front-end amplifier with high precision. Strain gauges can be connected to the measuring bridge in full bridges, half bridges or ¼ bridge construction. ...
Frequency: 0 Hz - 20,000,000 Hz
The EL-LNA-2 is a 2-channel amplifier manufactured by Elsys. It is designed for any 3rd party data acquisition system. The amplifier offers an option between two gain stages of x10 and x100, both with ...
Voltage: 300 V
Current: 150 mA
... half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9100 amplifies signals from DC to over 500kHz. The unit has a fixed gain of x15 however the same amplifier ...
Tabor Electronics
Power: 1 W
... without Cooling Fans Model Specific and General Configurations AC and DC Power Supply Options and Control Cable Interfaces Amplifier Mating Control Connector Interfaces Thermal Gaskets Included
Pasternack Enterprises, Inc.
Current: 1, 2 A
Power: 20 W
Frequency: 100 kHz - 22,000 kHz
... Bandwidth(-3dB):100kHz~22MHz Rated output power: 20W P1dB output power:40W Power gain: 40dB ATA-1222A is an RF power amplifier. The rated output power is 20W, P1dB output power is 40W. The gain is numerically adjustable, ...
Xi'an Aigtek Electronic Technology Co., Ltd.
Voltage: 35, 70 V
Current: 2 A
Power: 70 W
ATA-1372A is an ideal single-channel wide band amplifier that can amplify the AC and DC signals.matching with the mainstream signal generator, realize perfect signal amplification. Input The input is BNC interface ...
Xi'an Aigtek Electronic Technology Co., Ltd.
Voltage: 200, 100 V
Current: 500 mA
Power: 50 W
ATA-2021B is a single-channel high voltage amplifier capable of amplifying AC/DC signals. Maximum output 200Vp-p (±100Vp) high voltage, the DC offset voltage can be adjusted in three ranges, and the maximum output can ...
Xi'an Aigtek Electronic Technology Co., Ltd.
Voltage: 110 mV - 220 mV
Power: 70 W
Frequency: 50 Hz - 60 Hz
SIP Amplifier IPMG-70P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...
HONGKONG KOON TECHNOLOGY LTD
Voltage: 110 mV - 220 mV
Current: 4 mA - 6 mA
Power: 0 W - 130 W
IP Amplifier IPMG-130P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...
HONGKONG KOON TECHNOLOGY LTD
Voltage: 110 mV - 220 mV
Current: 4 mA - 6 mA
Power: 0 W - 360 W
VoIP Power Amplifier IPMG-360P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...
HONGKONG KOON TECHNOLOGY LTD
The MN 921 is a one-channel measuring amplifier with a power supply unit for measurement microphones. Between the input and output a precision measuring amplifier with changeable amplification is ...
Voltage: 120 V
Current: 32 A
Power: 450, 60 W
... digital-analog model simulation changes, the power amplifiers are one of the main roles in the simulation system which could work as a bridge between simulator and other equipment. PA460Bi amplifier ...
PONOVO POWER CO., LTD
Voltage: 270 V
Power: 5,000 W
Frequency: 5 kHz
... the digital simulation system such as RTDS/OPAL-RT, it gives accurate dynamic simulation waveform signal to the amplifiers. The amplifiers output the high and accurate power to the simulation equipment ...
PONOVO POWER CO., LTD
PHPC01 current booster is an accessory which can work together with protection relay test kit to test transformer protection relay testing. It is specifically designed to supply high compliance voltage even at small current range. It ...
PONOVO POWER CO., LTD
Voltage: 8 V - 32 V
SBS48M-CA-16 Intelligent Signal Adapter for Joysticks - High reliability, High performance - Convert multipath analog signals & digital signals to CAN signal - Support CAN-Open protocol - Center position、Keeping area、Output ...
Voltage: 230, 110 V
Power: 10 W - 25 W
Frequency: 430 MHz - 440 MHz
New excellent and reliable solid state linear power amplifiers for VHF e UHF band with AC power supply on board. Developed and manufactured with very large Microset® experienced ability and last power MOS technology ...
Microset
II2(1)G Ex eb mb ib [ia Ga] IIC T4 Gb II2(1) D Ex tb ib [ia Da] IIIC T130°C Db Universal Ex switching amplifier for installation in Zone 1 / 2 / 21 / 22 Two configurable switching points / relay outputs Ambient temperature ...
Switching amplifier with relay output Two configurable switching points Ambient temperature -40…+70 °C IP66 Parameters can be set on site; display Stainless steel / polymer compound material for maximum corrosion ...
Voltage: 0 V - 300 V
Current: 0 A - 10 A
... design • Universal Input/Output (user selectable) • Full 3-port isolation • High accuracy The 2002ALM family of trip-amplifiers can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage types • ...
Voltage: -10 V - 10 V
Current: -2 mA - 2 mA
• Measuring ranges from ±2 to 2200000 pC • Frequency range: ≈0 … 200 kHz • LCD and rotary knob for operation and configuration • RS-232C interface Electrical properties Output signal type Voltage Input type Charge (Piezoelectric, ...
Kistler
Voltage: 10, -10 V
Current: 0 mA - 1 mA
Frequency: 0 kHz - 10 kHz
• Measuring range 1: ±100000 pC, measuring range 2: ±10000 pC • Charge input: KIAG 10-32 neg. • output signal: ±10 V with up to 10 kHz bandwidth Metrological characteristics Linearity <±0.05 %FSO Electrical properties Output ...
Kistler
Frequency: 0 kHz - 200 kHz
Electrical properties Output signal type Voltage Input type Charge (Piezoelectric, PE) Signal size Very small signals (1000000pC) Dynamical properties Time constant Short, Long Operation and installation Device usage Signal conditioning
Kistler
Voltage: 24 V - 230 V
... standard signals - with wide-range power supply unit • for snapping onto top-hat rail (DIN EN 50022-35) The isolation amplifier DTVU20 is mainly used for the conversion of standard signals. Fields of application are ...
Voltage: 0 V - 5 V
A Range of 2 amplifiers dedicated to amplify the signals from PT100 and 1000 platinum probes. The APT amplifier is built in a very compact housing allowing an easy installation into any wiring loom (Racing, ...
TEXYS
Our AMPT 2L product is an in-line analogue strain gauge amplifier with offset and gain controlled by microcontroller. It makes work very simple as it allows for: - Gain and offset adjustment. - Initiation of a temperature ...
TEXYS
The XN5 strain gauge amplifier is a 4 channel output version of our popular XN4 strain gauge amplifier. With the XN5 strain gauge amplifier, it’s possible to use a single compact amplifier ...
TEXYS
Sound amplifier for telephone, suitable for loud environments. Plus points Robust siren: IP66 Power supply: Direct parallel connection to the telephone line Continuous operation Housing made of highly resistant, ...
ae&t
Sound amplifier for telephone, suitable for loud environments. Plus points Robust siren: IP66 Power supply: Direct parallel connection to the telephone line Continuous operation Housing made of highly resistant, ...
ae&t
Voltage: 230 V
Telephone optical amplifier, adapted to loud environments. Plus points Robust siren: IP66 Power supply: 230 Vac Continuous operation Highly resistant, self-extinguishing ABS casing Telephone plug adapter and ...
ae&t
Voltage: 70, 100, 50 V
Power: 120 W
Frequency: 10, 10 kHz
Power amplifier (Booster), Rated power output: 120W, Tones control: 1. Bass tones: ±10dB (100Hz) 2. Treble tones: ±10dB (10kHz). Frequency response: 30÷20,000Hz (-3dB), Sensitivity: 1250mV, Constant voltage outputs: 50-70-100V, ...
TELEA TECNOVISION SRL
Voltage: 50, 70, 100 V
Power: 240 W
Frequency: 100, 10 Hz
Power Amplifier (booster). Rated power output: 240W, Constant voltage outputs: 50-70-100V, Tones control: 1. Bass tones: ±10dB (100Hz) 2. Treble tones: ±10dB (10kHz), Sensitivity: 1250mV. Dimensions: 432x88x272 mm. Weight: 8,2 kg.
TELEA TECNOVISION SRL
Voltage: 50, 100, 70 V
Power: 480 W
Frequency: 100 Hz
... circuit, thermal switch located inside the power transformer, resettable thermal switch placed in contact with the power amplifier dissipator, mains fuses), fan cooling with automatic speed control.
TELEA TECNOVISION SRL
Voltage: 24, 110, 220 V
Current: 25 mA
These units are very versatile as they can be used with all NAMUR, NPN and PNP sensors, functioning with relay ON or OFF load with a timing function in both states. Furthermore they have a programmable time scale from 0,03 seconds ...
Voltage: 12, 110, 220 V
Current: 50 mA
These instruments are made up of a transformer an amplifier and a transistor, a rectifying circuit and one or two output relays with changeover contacts, respectively in the ALNC and ALN2 types. They are used to supply ...
Voltage: 12, 110 V
Current: 25 mA
These instruments are made up of a transformer an amplifier and a transistor, a rectifying circuit and one or two output relays with changeover contacts, respectively in the ALNC and ALN2 types. They are used to supply ...
Power: 5 W
... offers quick and versatile set up. CV9-C: 9 channel charge amplifier with individually selectable gain (x1, x10, x100) per channel via a three way switch. CV9-CL: 9 channel charge amplifier with ...
DJB Instruments UK Ltd
Current: 10 mA
... Terminal allowing for periodic Calibration Adjustable output up to 3.16V/g The CA/04 extended low frequency response charge amplifier forms an integral part of the 04 System, and can be interfaced directly with digital ...
DJB Instruments UK Ltd
Voltage: 10 V - 15 V
Current: 10 mA
... identical charge amplifiers housed within one unit, this type of charge amplifier is designed for use with 2 pole industrial accelerometers. The twin inputs are translated into one output, with the removal ...
DJB Instruments UK Ltd
Current: 0 mA - 0 mA
... Newtons4th Ltd. is a transimpedance amplifier (TIA) module which are the compatible unit for systems having a superior impedance designed for analyzing the system by measuring the current flow applying all the test and ...
Newtons4th Ltd.
Voltage: 12 V
Current: 1 A
The Newtons 4th Ltd LPA range of power amplifiers are used in various industry and laboratory operations because they are extremely strong and reliable. They were originally designed for the use with PSM range frequency ...
Newtons4th Ltd.
Voltage: 8, 3.6 V
Current: 75, 150 mA
LPA400 is a wideband high volatge amplifier for an industrial or laboratory environment. The LPA range of power amplifiers from Newtons4th Ltd are robust and reliable for use in a variety of industrial ...
Newtons4th Ltd.
Voltage: 16 V - 24 V
Current: 0 mA - 5 mA
... circuit at a signal amplifier input requires a current to voltage conversion amplifier with very low offset voltage independent of the selected gain range. Low noise output signal The P-9202 amplifiers ...
Gigahertz Optik GmbH
Voltage: 16 V - 24 V
Current: 0 mA - 5 mA
... circuit at a signal amplifier input requires a current to voltage conversion amplifier with very low offset voltage independent of the selected gain range. Low noise output signal The P-9202 amplifiers ...
Gigahertz Optik GmbH
Voltage: 16 V - 24 V
Current: 0 mA - 5 mA
... circuit at a signal amplifier input requires a current to voltage conversion amplifier with very low offset voltage independent of the selected gain range. Low noise output signal The P-9202 amplifiers ...
Gigahertz Optik GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining