- Electricity - Electronics >
- Electronic Component >
- Converter >
- YOKOGAWA Europe
YOKOGAWA Europe converters
Isolated Converters with Programmable 3-Color LCD Display The CN-6000 series isolated converters feature 12-segment, programmable 3-color (red, green, yellow) negative LCD displays for clear status ...
Communication Converters The SCM series communication converters are available in various types, to offer easy signal conversion and flexibility for building diverse systems. Wireless, USB-RS485, RS232C-RS485, ...
Multi-device control unit for MPD 800 The MCU2 multi-device control unit is designed for connecting one or more MPD 800 partial discharge (PD) measurement devices to a PC. It converts optical signals, which are generated by the PD measurement ...
IEEE 1588/PTP Time Converter TICRO 100 is a Precision Time Protocol (PTP) time converter that allows you to derive a high variety of time codes from IEEE 1588/PTP packages received by Ethernet. This ...
PTP transparent Ethernet media converter EMCON 200 is an Ethernet media converter used for connecting optical fiber and twisted pair copper Ethernet networks. Copper-based connections are limited to ...
The Simex SRS-2/4-Z45 Converter Module, primarily employed to link MASTER devices with a RS-232 port to RS-485 bus, generally supports devices which manage Tx switching through RTS signal and devices that do not control ...
Cross sectional converter Series ULW 3 Recording width up to 100 mm Ambient temperature up to 200 °C High resolution Opto High capacity systems Here you will find cross section converters to ...
Ethernet to RS-232/ 422/ 485 Serial Device Dynamic IP Configuration Server / Client Dual Modes Built-in Security Control Remote Reprogramming Lantech LSC-1102B is a full set serial device within two serial ports ...
Lantech Communications Europe GmbH
Gigabit Ethernet 10/100/1000Base-T to 100/1000Base-X Media Converter Compact and Stand-alone Media Converter 9K Bytes Jumbo Frame Size Link Alarm for both of UTP or fiber connection ...
Lantech Communications Europe GmbH
... Media Converter w/ LLF function Build in Link Loss Forwarding Technology DIP switch for Auto negotiation, Speed , Half/ Full Duplex and LLF mode Slide in 16-slot converter chassis Lantech ...
Lantech Communications Europe GmbH
The digital conductivity converter CONDIX4613 is used for the conductivity measurement of liquids. The integrated digital transmitter submits values and parameters to a master (e.g. PLC, SCADA). Device parameters and ...
Senseca Germany GmbH
The digital conductivity converter CONDIX4613 is used for the conductivity measurement of liquids. The integrated digital transmitter submits values and parameters to a master (e.g. PLC, SCADA). Device parameters and ...
Senseca Germany GmbH
The digital conductivity converter CONDIX4623 is used for the conductivity measurement of liquids. The integrated digital transmitter submits values and parameters to a master (e.g. PLC, SCADA). Device parameters and ...
Senseca Germany GmbH
... electrostatic protection and 600W/ms lightning protection -40℃~+85℃ working temperature The MWE820B converter is a USB to RS232/485/422 interface converter that can realize bidirectional data conversion ...
Wuhan Maiwe Communication Co., Ltd
... 30V power input Support working temperature from -40 ℃ to +85 ℃ The MWE485-H4 is a DIN-rail serial port isolation hub converter that supports bidirectional transparent conversion between one RS232/485 master station ...
Wuhan Maiwe Communication Co., Ltd
... The MWE485-TDM is a enhanced 3-end isolation RS232 to RS485/422 interface converter. It can achieve bidirectional data conversion between serial ports, and the converter can automatically detect the ...
Wuhan Maiwe Communication Co., Ltd
... diversity of relay and optocoupler modules that use the practical terminal block format. Our analog transformers and temperature converters are specially designed for applications in the field of process measuring and ...
MURRELEKTRONIK
In Northern and Central European installations there are many devices that log consumption, equipped with M-BUS communications protocols or interfaces. These equipments measure cold and hot water consumption, as well steam, gas, electricity, ...
TCP1RS+ is a gateway designed to convert the Ethernet physical environment to RS-485. The unit can be fully customised with the software provided, allowing to configure any parameter related to the Ethernet or serial communications ports.
The OMX 200 model series are digital DIN rail mounted signal converters housed in an enclosure only 12.5 mm wide. The OMX 211PM type is a simple single-channel isolator with a convenient setting of the input and output ...
Orbit Merret s.r.o.
... housing or the free OM Link SW from a PC. You can also use this converter as a splitter into 2 analogue outputs. This device is based on a microprocessor with a 24-bit ∆∑ A/D converter, which guarantees ...
Orbit Merret s.r.o.
... OMX 300 model series are digital DIN rail mounted signal converters housed in an enclosure only 17.5 mm wide. The OMX 311UNI type is a galvanic isolated single-channel universal signal converter. It ...
Orbit Merret s.r.o.
The CRY573 digital microphone converter converts the digital signal of the digital microphone into the analog signal output.Supports both PDM digital interface and I2S digital interface, supports a variety of sampling ...
... transmission, address mapping Product Details Introduction ODOT-S2E2/S4E2 gateway is a Modbus-RTU/ASCII to Modbus-TCP protocol converter. This product can connect Modbus device to PLC and master computer that supports ...
ODOT Automation
ODOT-PNM02: Modbus-RTU/ASCII to ProfiNet Protocol Converter Product Model:ODOT-PNM02 Product Feature: ODOT-PNM02 ♦Supports protocol conversion between Modbus and PROFINET ♦Supports 2* RS485/RS232 or 1*RS422 ♦Supports ...
ODOT Automation
ODOT-S2E2: 2 Serial Modbus RTU/ASCII to Modbus TCP Protocol Converter Product Model:ODOT-S2E2 Product Feature: ♦Supports protocol conversion between Modbus-RTU and Modbus-TCP ♦Supports the connection of5 TCP clients ...
ODOT Automation
... standards -LED signal display -M.T.B.F. > 10e6 P.O.H. Introduction Designed to connect directly to PCs, this converter has a female SUB D9 connector to the RS232 port and a screw-in connecrting terminal ...
ACKSYS Communications & Systems
-3 in 1 built-in serial interface : RS232/RS422/RS485 -Serial link up to 2 Mbps for RS422 & RS485 mode, 1 Mbps for RS232 mode -Reliable error free communication even in case of EMI/RFI pertubations -Fiber length up ...
ACKSYS Communications & Systems
-3 in 1 built-in serial interface : RS232/RS422/RS485, speed up to 500 Kbps (RS232), 2 Mbps (RS422/485) -Reliable error free communication even in case of EMI/RFI pertubations -Fiber length up to 20 Km (9/125 µm fiber type), ...
ACKSYS Communications & Systems
The signal converter DZ266 is used to convert frequencies to analog or serial RS232 signals. • Input for HTL / RS422 signals up to 1MHz • 1 analog output • Setting via RS232 interface • Backlit LCD display • + ...
motrona
The UZ210 is a signal converter for the conversion of analog input signals into incremental signals, SSI absolute values or into serial RS232 / RS485 signals. • 1 analog input • 1 HTL / RS422 output • 4 PNP control ...
motrona
For the conversion of SSI absolute values or serial data into parallel formats (binary, Graycode or BCD), the signal converter IP251 is suitable. • SSI input up to 25 bits • Clock frequency up to 1 MHz • 25 bit parallel ...
motrona
The MV110 converter is mainly used in the water market, in HVAC and in industrial applications where performance and outputs or basic protocols are required. It offers the possibility to program it via the keyboard on ...
ISOIL Industria Spa
... BIV) to evaluate the electrical characteristics of the sensor and converter over time. Categories: Flow meters sensors and converters, Thermal energy meters Description The converter ...
ISOIL Industria Spa
The MV800 ultra-compact blind converter for flow meters is suitable for coupling to all ISOMAG sensors in the case of full passage sensors up to DN400. Can be used for flow measurements on liquids with a minimum conductivity ...
ISOIL Industria Spa
Weber offers converters for all common frequencies (20 to 35 kHz) and power requirements (200 to 5,000 W). These converters are especially durable due to the Titanium-Aluminum alloy. Available as planar ...
Flange converters are available for all common frequencies (20 to 35 kHz) and power requirements (200 to 5,000 W). They are designed to keep weight at a minimum and their standardized quick disconnect allows for easy ...
The Interface Converter is the perfect solution to integrate generators interface easily and quickly. It ensures compatibility with PROFINET systems and is suitable for generators with a RS-485 interface. COMPATIBILITY - ...
... operating temperature range Overview of 3onedata IMC100 Series Unmanaged Industrial Media Converter IMC100 series are unmanaged industrial media converters. This series have 14 products and support ...
3onedata Co.,Ltd.
... delay. It can conduct automatic detection of baud rate, even the baud rate of the device serial signal changes; the converter can still achieve RS-232 or RS-485/422 to optical port conversion. MODEL277 series ...
3onedata Co.,Ltd.
-Support 1 Gigabit fiber port or SFP slot optional, 1/2 Gigabit PoE copper ports optional -Maximum power consumption of single port PoE is 30W -PoE provides power supply to powered device via Ethernet, which can reduce the cable connection ...
3onedata Co.,Ltd.
Serial to USB data converter for industrial environments (RS-232 and RS-485/EIA-485; compatible with RS-422/EIS-422) Installation in control cabinets via top-hat rail housing for rails according to DIN EN 60715 ...
USB - RS485 interface converter The interface converter code MCIUSB485 is used to connect to a PC, PLC or supervision system with USB interface, up to 32 measuring instruments or other devices* with ...
RPM Transducer Input from Proximity NAMUR, PNP, NPN or from Alternator or Dynamo
RPM Transducer, class 0,2 Input from Proximity NAMUR, PNP, NPN or from Alternator or Dynamo accuracy class 0,2 input range 5...120% Fn; Un response time <300msec residual ripple ...
The Z-8NTC is a digital converter with eight measurement channels for resistors, NTC and PTC. The module is characterised by an overall three-point isolation of up to 1.500 Vac (measurement channels // Power supply // ...
SENECA | Automation Interfaces
Z-4AI-D allows to acquire up to N.4 analogue inputs (ma or V) through a PLC with only digital input/output. The PLC interface is based on three PNP-type signals suited for connection to most PLCs available in the market. The interface ...
SENECA | Automation Interfaces
Z-4TC-D allows to acquire up to N.4 Thermocouple sensors (J, K, E, N, S, R ,B ,T) through a PLC with only digital input/output. The PLC interface is based on three PNP-type signals suited for connection to most PLCs available in the market. ...
SENECA | Automation Interfaces
BATTERY CONVERTER FOR CPSERIES The battery converter allows the powering of one POWERBOX and one CPSERIES from a LED battery such as those that are available in cars. The converter ...
The standard converters are suitable for the operation in standard machines and special actuators. Designed for the assembly into ultrasonic welding machines and special purpose machines The ideal converter ...
The standard converters are suitable for the operation in standard machines and special actuators. Designed for the assembly into ultrasonic welding machines and special purpose machines The ideal converter ...
The MultiCOM 302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent RS232 serial line that can be used to connect ...
The MultiCOM 411 connects a Riello UPS to a Profibus DP Network. In industrial environments, the Gateway integrates UPS management and monitoring into a control system. The Gateway uses the field bus design – one of the most popular used ...
PROFINET control system The MultiCOM 421 connects a Riello UPS to a PROFINET-IO Network. In industrial environments, the Gateway integrates UPS management and monitoring into a control system. The Gateway uses the PROFINET control system ...
RGMC-111GPB is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RGMC-111GPB is a cost-effective ...
Oring Industrial Networking Corp.
S1XMmM Universal Current / Voltage Converter, universal sensor input, Analog Output and RS485 Modbus RTU, RMS, AC and DC measurement, Min / Max and Average measurement, Frequency and Crest factor measurement, temperature ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining