|
|
|
Most widely used heat aging tester of rubber and plastic. Unlike ordinary heating ovens, the testers satisfy specifications indispensable to aging test such as closed mechanism, uniform air velocity in the oven, ventilation rate measurement, rotating soecimen rack, offering excellent reproductibility and reliability.
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
The standard procedures of numerous automotive manufacturers for simulating their products' environmental conditions make high demands on the chamber technology. They require a high degree of flexibility especially of
Special advantages offers the SPS control system which assures that process parameters are reached exactly and rapidly and that they are strictly maintained. The touchpad's clearly structured menu navigation makes it easy and secure to handle the test chamber. Process data can be visualised, supervised and documented with our software called VisiCORR®. For this purpose, the standard chamber is equipped with a Modbus RTU and an Ethernet TDP/IP interface.
|
|
The PGC 4.5 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic components, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
|
|
Laboratory Test Chambers
Temperature and Climatic Test Chambers
Series VTL and VCL
Compact, quiet, yet powerful units are required to tackle special requirements within limited laboratory space. Also tests are made on smaller specimens - all this directly at the work station.
The VTL and VCL series of temperature and climatic test chambers are ideally suited to such applications.
Test space volumes
34, 64 and 100 l
Temperature range from
+10°C to +180 °C
-40 °C to +180 °C
-70 °C to +180 °C
Humidity range
10 to 98 % RH
Control System:
Controller Board S!MPAC* with Touchpanel
|
|
Range of enclosure of laboratory
Temperature and climatic
Type VTL and VCL
Of compact construction, powerful, especially adapted for a use in laboratory when the place is limited.
Volumes of work
34 liters and 100 liters
Beach of work in temperature
+10°C with +150°C
-40°C with +150°C
-60°C with +150°C
Beach of relative humidity
10 to 98% hr
For more information to consult us
|
|
RBC Stackable Burn-in
Despatch’s stackable burn-in chambers offer maximum flexibility for small lot qualification testing, burn-in, reliability testing, and research and development.
Easy to use Controls - Improved controls are easy to use for both simple and complex applications. Single and multiple temperature applications can be started with the push of a button. Multiple temperature operations are controlled by up to eight programs, with eight ramp and soak segments in each program.
Thermal Dissipation - High volume recirculation fans maintain consistent, uniform temperatures required by MIL STD 883 while removing heat generated by the load. Despatch’s stackable burn-in chambers are ideal for high dissipation applications.
|
|
The high-flyer in testing technology!
Fast and precise temperature changes from - 42 °C to +190 °C lastingly reduce your process times! Innovative technology and the highest operating comfort combined to create a powerful duo for controlled material and function tests, with the TTC temperature test chamber and the CTC climatic test chamber with active humidification and dehumidification.
A top performance by the experts for controlled atmosphere. Efficient and flexible environmental testing and simulation. Worldwide.
|
|
We have developed these insulation rooms to be used for high-temperature and climate simulations.
Their basic design corresponds to the ILKAsim system and features mineral-wool insulation as well as a vapour-tight welding of the interior.
This guarantees perfect tightness even under extreme conditions.
Of course, this system can be tailored to your needs and requirements, too.
|
|
Atlas offers two types of environmental testing chambers, a temperature testing chamber and a full climatic chamber for temperature and humidity testing. Atlas partners with Weiss Umwelttechnik GmbH (Weiss Technik) for the marketing and production of standard climatic test chambers in the United States and Canada.
WT11-180/40 and WT11-340/40 Temperature Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for temperature testing.
WK11-180/40 and WK11-340/40 Temperature and Humidity Chamber
340 litre / 12 cu ft exposure zone
A versatile, state-of-the-art environmental chamber for climatic (temperature and humidity) testing.
|
|
Environmental simulation chambers for complex alternating climatic profiles
BINDER MKF series:
The MKF series is ideally suited for all tests in accordance with current temperature and climatic test standards based on DIN and IEC standards. The required temperature and humidity values can be attained rapidly and maintained accurately, even under extreme conditions. The unparalleled ease of operation as well as extensive standard features provide that ‘little extra’ in handling.
|
|
SPACE SIMULATOR
CONNECT
Aerospace industry
APPLICATION
Simulation in space environment to carry out tests on satellites or component satellite.
DESCRIPTION OF THE EQUIPMENT
Together including/understanding:
- A tank with vacuum equipped with various passages
- A machinery equipped with the fluid circuits and vacuum
- An electrical equipment box of power with orders in frontage
- Door on mobile carriage for support equipment
- A machined thermal plate
- A heat shield
PERFORMANCE
Pressure: < 1.10-6 mbar
Ranges of temperature: -60°C/+120°C
-170°C/+120°C
|
|
Constant Climatic Test Chambers
series VC 0...
We have designed the VC 0... series especially for the simulation of constant climates.
Test space volumes
190, 335, 600, 990 and 1540 l
Temperature range for climatic tests
+10 °C to +90 °C
Humidity range
10 % to 98 % RH
Calibration values as per ICH
+25 °C / 60 % RH
+40 °C / 75 % RH
The performance range for only temperature tests is wider.
The documentation of temperature and humidity is obtainable via an interface and our optional software S!MPATI or software S!MPATI Pharma (in accordance with FDA 21 CFR, Part 11).
Controll System:
Controller Board M!NCON/32
with removable Colour Touchpanel.
Qualification documentation according to FDA requirements is available.
|
|
Chalmbres of climatic tests for constant climates, range VC 00.
Volumes of tests 190,335,600,990 and 1540 liters
Operating range in temperature with regulation of the relative humidity
+10°C with +90°C
Beach of work in relative humidity
10% to 98% hr
2talonnage with values ICH
25°C/65%hr
40°C/75%hr
Beach of work in temperature without broader relative moisture.
For more information to consult us.
|
|
Test Climatic Chamber of Temperature and Relative Humidity
General Description
Our Equipments with Temperature Control (cooling/heat) and Humidity are conceived for to simulate the more several environmental conditions then it could generate in the nature, in the same way so accelerated environmental conditions to be inspired in the industrialized world (DIN, UNE, MIL, ASTM, IEC, Automotive Norms and Pharmaceutical Norms - ICH/FDA).
Each enterprise is a world and the essay it carry out are differents according to manufactured product and the sector where it going runs. Evidently the Climatic Chambers it isn't all identical neither to be useful for it same. It has necessary, well to know of precedence what's the customer like to essay and which are the characteristics of that essay: to adapt the Chamber to Customer, and not the Customer to the Chamber.
|
|
|
|
|
|
The revolution in the world of environmental technology!
The operating philosophy of the new WK3 is to enable users to access operating and control functions as well as to provide manual access to processes quickly and conveniently all over the world. The standard WK3 is equipped with the large 12" TFT touch screen monitor for convenient and easy operation. Furthermore, the chambers are equipped with an illuminated CONTROLPAD* that permanently displays the current operating state and the operating parameters. Users thus have a clear view of all important processes and can complete their work just using their fingertips.
Authorized users have access at all times to the current application via the integrated network interface and the webserver on the Internet and thus get the feeling that they are standing right in front of the unit.
The technical features of the new WK3 generation have also been optimised. Manufacturers place great importance on a high level of operational reliability and performance of their products. The WK3 is in the position, to maintain all climate parameters during continuous operation - e.g. at 85°C/85% relative humidity, even under exceptional conditions, e.g. midsummer outdoor temperatures or extreme climatic conditions inside the product.
|
|
Humid environment without condensation
HPP 108 and HPP 749 - constant climate chambers with double doors (inside glass, outside stainless steel)Are you looking for an appliance for long-term material tests which is quiet, environmentally friendly, and at the same time, extremely economical? Then you can use the innovative Peltier technology in the HPP for stable and precise long-term tests. The temperature control from 5 ºC to 70 ºC, as well as the active humidification and dehumidification from 10% to 90% rh, are optimally tuned to the requirements for ongoing stability tests. Your decision criteria:
Highly modern control technology based on the Perfect performance class for all models
Digitally controlled active humidification and dehumidification
Double doors as standard: Prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
|
|
|
|
Ascott Cyclic Corrosion Test Chambers
Key features
Ascott cyclic corrosion test chambers - one of the world most sophisticated and versatile corrosion test systems available - with the design and quality that right for today laboratory environment.
More key features
-Low loading threshold on all floor standing models for ease of loading/unloading especially at the back of the chamber
-Large capacity salt solution reservoir with graduated sight glass for ease of monitoring solution levels
-Unique salt spray atomizer to guarantee uniform salt spray distribution
-Catchpots® - salt spray remote fall-out facility allows salt spray to be continuously collected and measured without interrupting the test
-Pneumatically operated canopy for opening & closing chamber at the push of a button
-Touch-screen control panel for ease of programming, with graphical display of temperature/humidity profiles
-Dry seal gasket to canopy prevents wetting of operator's clothes, etc
-Choice of canopy colors with transparent interior viewing window
-Automatic air purge facility
-Calibration certificate
-Sample racks
-Consumables spares kit
|
|
Since the real corrosive environment changes from day to day (or faster), labs expose samples to various environmental stresses that promote corrosion. Lab technicians spend countless hours transferring specimens from one environment to another; a salt fog cabinet for corrosion; an oven for dry heat; a sink for direct spray, etc. Newer technology in corrosion equipment now creates these desired environments within one cabinet that significantly reduces the need to move or otherwise touch test specimens.
CCX Advanced Cyclic Corrosion Cabinet
Performs advanced cyclic corrosion tests - as well as basic cyclic tests and traditional salt fog (spray) and humidity tests.
|
|
|
|
|
|
SAL Table Top models 400 L / 1000 L
The unique 400 L salt spray cabinet can be placed either on an existing laboratory table or on the original VLM support. This offers the most convenient and space saving configuration of the cabinet, test solution reservoir and water purification plant. Only compressed air has to supplied. If there is no central plant you will find very low-noise compressors among the accessories.
Front door opening cabinets allow most convenient loading of the chamber particularly with hanging specimen. Moreover the cleaning of the chamber is easy. Due to the high level of the drain port there will be enough downward slope to the commonly installed siphons.
The side walls of the chamber are made of polyethylene with milled holes for the specimen support. The water trough, the back wall and the inner roof are made of stainless steel coated with Halar® (ECTFE). This unique design allows a quick transfer of the heat into the chamber. Together with the advanced temperature control system best conditions for the precise tempering of the chamber are provided.
For that reason SAL cabinets can also be applied to conducting of high humidity tests after the extension by the working system „CON“.
|
|
|
The standard procedures of numerous automotive manufacturers for simulating their products' environmental conditions make high demands on the chamber technology. They require a high degree of flexibility especially of laboratory and engineering service providers and automotive suppliers.
|
|
Liebisch desk type units are supplied with 300 litre test chamber volume. They are used for condensation water tests with or without pollution gas (e.g. DIN EN ISO 6270-2, DIN 50018). Options are available to meet customer test requirements.
Constanzo®
These units are available with or without automatic ventilation. With the automatic ventilation the user needn’t open the test chamber door during ventilation periods. Ambient air passes through the test chamber. The test chamber temperature range is max. 50°C, the increased operating temperature system (EA) allows a temperature of up to 60°C
|
|
Key features
Ascott cyclic corrosion test chambers - one of the world's most sophisticated and versatile corrosion test systems available - with the design and quality that's right for today's laboratory environment.
Three model sizes:
450 Ltr (15.8 cu ft) - the ever popular
1000 Ltr (35.3 cu ft) - big enough for most samples
2000 Ltr (70.6 cu ft) - for the very largest samples.
Touch-screen control panel:
Using the 'touch-screen' control panel Ascott cyclic corrosion test chambers can be programmed to link together a variety of environments: salt spray, temperature, humidity (wet/dry) to form a corrosion cycle.
Extensive optional testing facilities:
Extensive range optional testing facilities, such as refrigeration and liquid immersion.
|
|
Corrosion Test Apparatus for Alternating Tests, Model 608
For testing with cycles of changing corrosive effects in accordance with VDA 621-415. Basic concept, design details and dimensions as for Model 606. Microcomputer to control test cycle (neutral salt spray DIN 50 021, alternating condensation water climate AHT DIN EN ISO 6270-2, ambient temperature DIN 50 014).
|
|
|
Cyclic corrosion test Cabinet 1000 litres or 2000 litres with external deposit, all made of INOX AISI 304, Corrosion chambers CCONS 400 litres, CCONS 1000 litres and CCONS 2000 litres
|
|
New testing methods issued by the automotive industry require cycling climate condition in a considerably extended range from -30°C up to + 80°C. Those tests had to be carried out up to now in separate testing chambers designed for climate tests respectively for conducting corrosion tests comprising salt spray.
Now the new ClimaCORR Multifunction cabinet, developed by VLM GMBH Germany allows the complete test procedure in the same testing chamber.
The recently developed MultiCORR-testing procedure,respectively the developed advanced PLC offer best qualifications for a high precision of the reproducibility of the testing cycles.
If you would like detailed information, please contact us : info@vlmgmbh.de
|
|
VLM offers you a comprehensive product range of bench top cabinets or chest models which covers a wide application and service spectrum going from the classical VDA test (VDA 621-415) or VW PV 1210 with conditionened ambient air to very exigent test procudures according to the factory standards of other automotive manufacturers and suppliers (see "MF" multifunction series).
We are pleased to advise you in order to compile the chamber configuration which fits exactly to your needs. Due to their unique construction and material composition, VLM corrosion testing chambers provide the best conditions to realise a high reproducibility of fully automatic cyclic corrosion tests
|
|
Liebisch cabinet type units are available in 400, 1000 and 2000 litre test chamber sizes.
Constacon® SC
This series are manually operated cabinets of type M-SC for performing of condensation water tests such as DIN EN ISO 6270-2 (without pollution gas).
Constasal® SC
This series are manually operated cabinets of type M-SC for performing of salt spray tests such as DIN EN ISO 9227.
Constamatic® SC
This series are programmable and operate the A-SC range of cabinets. The unit’s easy to use programmer is mount in the control panel. All functions are displayed on a multi-line menu-driven display. The units can be equipped with systems for salt spray or built as combination testing units.
|
|
|
|
Climatic test chambers
