|
|
| Products 121 to 150 of 184 |
Dynamic Mechanical Tester
DForce is a low force mechanical testing system capable of performing static and dynamic tests to 15 Hz in tension or compression. Typical uses include determining the force-deflection properties and fatigue life of biomaterials, composites, medical devices, packaging, products and more. DForce actuators are linear motors that come in three frame sizes providing continuous forces from 20N to 275N and peak forces from 90N to 1850N. Actuator strokes range from 25mm to 300mm. An internal dry bearing provides clean quiet, maintenance free performance.
|
|
Lacquer and Paint Testing Machine, Model 202 C
Version with electro-hydraulic drive for coated sheets up to 1.5 mm thick. Infinitely variable control of drawing speed up to 50 mm/min. Automatic clamping of specimen. By virtue of the C-form test head aperture it is possible to test sheet metal panels in addition to sheet metal strips.
Option:
Camera module VIDEOMASTER USB comfortable observation of the deep drawing process or stereo microscope.
|
|
Cupping and Deep-drawing Cup Test Machine, Model 242
For testing lacquers and paints of all kinds for elasticity and adhesive quality using the Erichsen Cupping Test in conformity with DIN ISO 1520, ISO 1520, BS 3900:Part E4, NF T 30-019 and SIS 18 41 77 and deep drawing cup test. Matched test tools permit automatic sequence of operations: pressing the test piece, cutting the blank, exerting the sheet holder pressure, deep drawing, sheet holder pressure release, stripping of cup, return of punch to initial position and switch-off of machine.
The testing machine including one test tool according to DIN ISO 1520.
|
|
|
|
|
|
TAPlus Texture Analyser
Texture Analyser 102 kgf (1 kN, 225 lbf)
The system is capable of storing up to 600 test results from a choice of 10 programmable test set-ups. For enhanced performance, the TAPlus can be used with Lloyd Instruments NEXYGENPlus data analysis software . The software contains an extensive library of pre-programmed texture test set-ups based on international standards. Test information can easily be exported to Microsoft® products such as Word, Excel® and Outlook®.
The machine can be fitted with a wide range of specially engineered food texture fixtures and probes as well as multi-purpose grips for general applications such as packaging testing.
Key Features
Simple to set up, operate and maintain
Load measuring system exceeds the requirements of all recognised international standards
Large working area - 175 mm (6.9 in) throat for large specimens
Crosshead travel 500 mm (19.69 in)
Speed range 0.05 - 1270 mm/min (0.002 to 50 in/min)
Flexible work surface configurations
Base table, stainless steel drip tray and 12 mm (1/2 in) cylinder probe supplied as standard
Load rate control
Data sampling rate 8 kHz
High resolution backlit LCD display with intuitive operator interface
Multi-lingual and multi-unit display options as standard
Flash memory upgradeable
Full PC integration with ISO TickIT accredited NEXYGENPlus data analysis software.
|
|
|
|
|
|
The TMS-Console from Food Technology Corporation is an affordable texture analyzer, suitable for quick and easy food texture assessments direct from the production line. Providing instant verification of consistent quality, the system saves time, money and resource.
The TMS-Console hands control over to the user, enabling up to 30 test programs to be created and stored to suit test requirements. Its simple operation means operators need only select the relevant test from a menu screen and press 'start', which is incredibly useful for routine testing.
The user-friendly console interface displays test results with pass/fail indicators and provides the choice to perform texture measurements, which; run to load, deformation, time or break detection, effectively replicating the tests that could normally only be undertaken within a laboratory environment.
This texture analyzer enables a range of textural attributes to be measured, displaying results including; average loads, minimum load adhesive force, rupture force, fracture and break force, bloom strength, stress relaxation and many more.
Applications
Compression
Breaking
Shearing
Extrusion
Bulk Analysis
Tension
Puncture & penetration
This all-in-one food texture measurement system is rated up to 2500N.
|
|
|
|
|
|
New Powerful CT3 Texture Analyzer Features Both Compression and Tension!
Brookfield Engineering introduces the New CT3 Texture Analyzer, the most powerful, lowest cost, stand-alone Texture Analyzer ever produced. This new generation instrument features not only the traditional Compression Mode, but now includes a brand new Tension Mode. Now manufacturers can test their products and the packaging as well. The large vertical work area of the CT3 is ideal for large sample placement. This also allows for increased travel distance maximizing the functionality of the new Tension Mode.
The CT3 offers load cells with expanded range capability from 100 grams to 50 kilograms. The 10kg load limit more than doubles the limit of it’s predecessor, the LFRA Texture Analyzer. It also features a broader speed range for probe movement, a USB port for direct connection to a PC, and an optional temperature probe.
The CT3 Texture Analyzer features seven test modes. These Report Test Modes include: Normal Test, Hold Time Test, Cycle Count Test, Bloom Test, TPA Test, Tension Test and Static Load Calibrator Check.
Brookfield provides a complete line of fixtures for use with the CT3. In addition, Brookfield will work with customers to develop custom equipment for their specific texture measurement applications.
|
|
|
|
|
|
The TMS-Pro is FTC's top-of-the-range texture analyzer, designed to be an affordable alternative to the higher priced systems available on the market.
The main benefits of this food texture system is its pinpoint accuracy of force measurement in tension and compression (data acquisition rate of 2000 readings per second), with precision positioning and speed control. Offering full programming capability, operators can easily change test methods and variables to assess different food characteristics.
The use of Texture Lab Pro software means test data is plotted in real-time providing initial observational analysis of the test as it is being performed. Once complete, operators can;
• Overlay multiple graphs to compare test results
• Interrogate results using analysis tools to assess performance in more detail
• Generate a report showing graph and test data
• Export report directly to Microsoft Excel or to an external printer
The TMS-Pro combined with Food Technology Corporation's test cells and fixtures means you can squash, snap, cut, puncture, extrude and stretch raw and processed food samples up to a maximum force of 2500N (562lbf).
|
|
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test stand.
The TWIST, a 1 to 12 NM torsion test stand with combined Torque/Angle measurement provides this function.
The torsion meter enables torsion tests to be made on various samples such as springs, or metal or plastic parts.
It is made up of a horizontal, rigid test stand, with two rails to provide precision guidance.
Its calculating power enables it to record values coming from 2 different sensors simultaneously, monitor the set points and make a calculation for each channel.
On its display, it shows a Torque/Angle graph curve.
It provides the simplest, most versatile system for dealing with the most wide-ranging torsion tests in the workshop or in the laboratory.
|
|
|
The Crane Joint Rate Simulator (JRS Opta) is used for assembly tool performance testing. This is achieved by accurate and repetitive simulation of the joint without the use of a threaded fastener. The JRS can be configured across a range of joints from hard (20 degrees) to soft (720 degrees). Once the tool has finished its test cycle, the JRS Opta automatically releases the brake ready for the next test cycle. This has the advantage of speeding up the tool test procedure because there are no fixings to undo and no joint kits to back off and re-grease between test cycles
|
|
|
The Vortex is a twin-column motorised torque testing machine. Speed is set with a rotary potentiomer controller. Either speed or total rotation is indicated on an LCD display. Torque is measured by a `smart` static torque transducer and displayed on an AFTI.
|
|
|
|
|
|
bottle or jar opening tester : ANDITORK EA
The ANDITORK EA bottle or jar opening tester is specially designed to measure opening torques for bottles and jars.
Opening tester with ring securized cap : ANDITORK ST
If the cap has a security ring, the test can be carried out using the ANDITORK ST
Tester for small bottles : MICROTORK
The MICROTORK is specially designed for small bottles, and it is equipped with a small grip plate whose fingers can be used to hold small containers.
Available in Easy and Star versions.
Anditork Security : ANDITORK DL
The ANDITORK DL product is designed to measure opening torques with downward force.This procedure is used to check safety caps.
motorized opening torque measuring instrument : DRIVETORK
The DRIVETORK motorized opening torque measuring instrument is just the right equipment for production teams that have to carry out a lot of opening tests and want to eliminate the variability linked to operators.
Torsion test stand : TWIST
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test
stand.
The TWIST, a 1 to 12 NM torsion test stand
with combined Torque/Angle measurement provides this function.
Torque wrench calibrator : CENTOR Meter W
The CENTOR Meter W torque wrench calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 22 to 222 NM.
torque screwdriver calibrator : CENTOR Meter H
A set of low-capacity reference torque sensors enables use of the CENTOR Meter H torque screwdriver calibrator to verify torque screwdrivers from 1 Nm to 6 Nm.
|
|
|
|
|
|
Equipment manually operated for right and left torque control on springs with two ad{ustabfe stops for the angular position, with horizontal enb/oc structure with precision ball type guides- Its high definition electronic cell allows torque measurements while the angular positions are controlled by digital encoder with 0. / degree minimum division. The elasticity of the torquemeter cell is automatically compensated. This torquemeter is supplied with tables, adjustable in order to set the torsion point, and either operates with the relative zero given by the spring contact, or with the absolute zero given by the anvil contact. How it is conceived: The instrument provides direct torque measurement, which means it provides the same measurement at all times, including when connection points vary. Therefore, there is no need for accurate positioning of the drive arms.
DIGITAL
The digital part has a push button panel in order to visualize on two displays the torques and angles. Kgmm and Nmm are the commutable units and on request, British measures con be supplied. These functions are set with keyboard and they provide for:
• AUTOMATIC ZEROSETTING. Possibility to zeroset angle and torque on any point
• RECALIBRATION. Keys are provided far setting the sample torque, together with a key for storage.
• MULTICELI (optional). Electronic commutation key in case of more cells
• TOLERANCES. Three leds are far rates over/under/within tolerance
• DATA TRANSMISSION. The instrument is supplied with an RS 232 output
|
|
|
|
|
|
Instron's line of torque testers extends Instron's materials testing solutions by providing dependable torsion and axial-torsion testing capability.
These torsion testers utilize the familiar 5500 and 8800 electronics you've come to rely on. Available in capacities from 12 Nm (100 in-lb) through 13,000 Nm (120,000 in-lb) these test frames are versatile and easy-to-use for many applications including biomedical, automotive, aerospace and other industrial and consumer products.
The 55MT Series is a family of two table-top torsion testers.
55MT1 offers a 22 Nm (200 in-lb) capacity
55MT2 offers a capacity of up to 220 Nm (2,000 in-lb)
The 55MT Torsion Testers are based on a dual linear slide design, which provides for high torsional stiffness and minimal axial friction. The system torque cell is attached to a movable crosshead, which can be left free floating or clamped during testing. When left free floating, the user can apply an axial pre-load to the specimen using a weight and pulley arrangement. Closed loop servo control of the electromechanical drive is provided by Instron's standard 5500 electronics and Partner torsion software.
|
|
They are used for tension-compression, torsion, fatigue, sorting and strength test of various kinds of springs, I.e. helix spring, worm spring, papilionaceous spring etc.
TNS-L Series: 50-5000Nm 7 kinds of specifications, digital display torque and torsion angle, vertical construction and easy to operate.
TNS-S Series: 500-100000Nm 8 kinds of specifications, digital display torque and torsion angle & printing test report.
TNS Series: 500-5000Nm 4 kinds of specification, digital display torque and torsion angle, horizontal construction.
|
|
|
|
|
|
For maximum torsion testing versatility and capability, Tinius Olsen offers a full range of torsion testing machines in capacities from 1,000 to 30,000 Nm. These uniquely superior torsion testers provide loading and weighing capabilities in both directions of rotation. This feature makes it possible to conveniently determine not only the ultimate torque load of a specimen, but how that specimen behaves under conditions of continuous or intermittent torque loading in both directions. Essentially, each torsion tester comprises a variable speed drive loading system and a digital control and indicating system in a fixed unit. The weighing head with its strain gage torque sensor is mounted on a moveable unit which can positioned on the rails to accomodate specimens of varying lengths.
All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
|
|
|
|
|
|
UNIVERSAL TESTING MACHINE CAPABLE OF CARRYING OUT TENSILE, COMPRESSION, BENDING AND SHEARING TESTS.
Operation is manual, semi-automatic, and automatic.
Testable objects include: springs, metal wires, plastics, cables, chains, hooks and other. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and 3 sefs of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of Ì 000 Hz. Load celt reads are effected 1,000 times per second. Minimum indexing is 1/32.700 ¡this can be increased by slowing down load cell reading). The universal testing machine operates with computerized numerical control and includes a computer with HD and touch screen. It is a self-supporting, two-columns structure with ball screws. Its electronic setup enables cycles of stress of sinusoidal form which result in machine preservation and remarkable performance - notwithstanding the boll screw mechanism. DC power driven, encoder (or optical ruler}. The computer programme for this machine has entirely been developed by Easydur based on Windows XP, with internal files, statistics and certificate management in Excel format, which allows users free modularisation and customisation.
|
|
|
The Inspekt series of universal testing machines offers the highest mechanic precision of all Hegewald & Peschke machines. It is also characterised by its first-class frame stiffness, modern control electronics, and a convincing cost/performance ratio. The size of the test spaces of the individual machines can be customized. Naturally, it is also possible to add one or more test spaces. Thus, the top-quality, rugged machines can be used for almost any testing task at the best reliability and accuracy.
|
|
Universal testing machines Inspekt table blue up to 20kN
The materials testing machines of the series Inspekt table blue are especially suitable for standard applications in quality assurance. Due to the high demand for cost-efficient testing machines, Inspekt table blue has been equipped with a simple, but multifunctional load frame. Depending on the demands and complexity of the testing task, it is possible to carry out tests with or without an external computer.
Universal testing machines Inspekt table up to 250kN
The material testing machines of the Inspekt table series have been designed for universal application in many different sectors of industry. Typically, they are employed in incoming and outgoing goods departments, research and development, and material testing laboratories. Hegewald & Peschke GmbH attaches great importance to the reliability and flexibility of its machines. Thus, Hegewald & Peschke GmbH uses only high-quality components.
|
|
|
The inspekt mini is a very lightweight testing machine, which has been designed for simple standard tests or customer-specific, more challenging tests. It stands out due to its convincing cost/performance ratio and the user-friendly manner of operation. In connection with the testing software LabMaster, Inspekt mini machines can determine material characteristics of wires, foam plastics, elastomers, plastics, paper, cardboard, textiles, foodstuffs, and components in a quick and easy way.
|
|
|
|
|
|
Model: CMT4102; CMT4202; CMT2502; CMT4102; CMT4103; CMT4203; CMT4503
CMT4104; CMT4204; CMT4304
Capacity: 100N; 200N; 500N; 1kN; 2KN; 5KN; 10KN; 20KN ; 30KN
Features:
These rugged electromechanical UTMs feature SANS strain gage load cell force measuring systems. Choice of single working space or dual working space load frame and maximum frame capacities from 100Nto 30kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
SANS professional testing software and proprietary control system ultimate come true closed loop testing and control of load, extension and displacement.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. Extending function: Equipped with multi-load cells to meet the further requirement of customers
6. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
7. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
|
|
|
|
|
|
DMA 242 C - Dynamic mechanical Analyzer
The versatility of the DMA 242 C is particularly clear from the variety of sample holders. Depending on the type and consistency of your sample, you can investigate the visco-elastic properties accurately over a wide modulus range.
A stainless steel container facilitates measurements in various media (immersion tests). With the use of a thermostat, it is also possible to carry out reliable extended time tests at higher temperatures.
The DMA 242 C operates in the broad temperature range of -170 to 600°C. The low-temperature range is achieved with the proven, low-consumption CC 200 L liquid nitrogen cooling system. The minimal temperature gradient over a sample length of up to 60 mm in the bending mode is unique.
An intelligent purge gas system provides for a defined sample atmosphere and protects the measurement electronics from any gases evolving from the sample as well.
Frequencies from 0.01 to 100 Hz can be selected and combined with defined stress of up to 16 N and deformation amplitudes of between 0.1 and 240 µm.
The digital filtering via Fourier analysis yields an excellent signal-to-noise ratio, which means that even the smallest tanä values can be resolved. Comprehensive, multi-dimensional calibration of the DMA system guarantees reproducible test results for the stiffness and damping (visco-elastic) behavior of your sample.
|
|
Unrivalled performances …
AG-X : You door to the future..
Experience unsurpassed reliability and operability with the new Shimadzu Autograph AG-X. This revolutionary new model delivers high-level controlled measurement performance utilizing a combination of patented technology from earlier models and world-class innovations.
Development of this series focused on intuitive operation and convenient support functions, resulting in standard equipment that includes both a color TFT touch panel screen for PC-free operation and the very popular Smart Controller operation featured on many of our earlier testing machines.
The TRAPEZIUM X software has also been newly developed, using cutting-edge Microsoft .NET technology to enhance user-friendliness. Shimadzu's new AG-X series advances testing in three areas performance, operability and support.
Don´t miss your chance to find out more about our Universal Testing Machines, Hardness Tester and Capillar Rheometer
|
|
This kind of machine is mainly suitable to measure and test the mechanics properties of metal, rubber, plastic and other materials. Equipped with EDC digital controller (made in Germany) and high precision load cell (made in Japan), the whole system has high liability and stability. It benefits and absorbs clients in all aspects. It is widely used in machinery, metallurgy, aviation& space flight, building, transportation, vessel, ceramic, vehicle, medical, electronic and other industries.
|
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction.
|
|
Early detection of developing faults in materials or products is essential for the prevention of costly losses in manufacture and claims resulting from faulty products, which can include consequential damages.
By establishing essential parameters for new products at the outset against which materials can be monitored, risks in safety and the
resulting possibilities for financial penalties are minimised.
Dealing with forces is dangerous. TesT attaches great importance to industrial safety. Universal testing machines made by TesT are fitted with electrically interlocked polycarbonate guarding.
Special safety guards for higher levels of risk or to enclose extra large
specimens are available on request. The safety provision meets the requirements of the European Community directives. Universal Testing machines made by TesT are CE-labelled and delivered with the CE conformity declaration, without any restriction.
|
|
|
|
|
|
Allround-Line
For optimum harmonization with the requirements of your test, the Allround-Line offers a variety of load frames, e.g. table-top or floor machines, with different maximum forces up to 250 kN, various heights and widths, or even with a second test area. And, of course, accessories like safety shields, temperature chambers, and further test equipment are also available in a wide range to meet your particular needs.
The test machines from the Allround-Line can also be operated with or without a PC as desired. The operation with standard PCs (no additional card necessary) and the test software testXpert® offers you the highest operating comfort, efficient data analysis and statistics, and performant networking functionality.
The test machines are all equipped with our proprietary electronics console testControl.
Advantages:
Mechanics, electronics and software as a modular system for customization with our add-ons
Crossheads with uniform mechanical interfaces for shorter re-equipment times, ideal when alternating test types
High crosshead travel and a wide test area
Robust and sturdy industrial drive system
Wide range of test equipment available for a large spectrum of applications
Ergonomic working in a seated or standing position
|
|
|
The eXpert 560x series is a bold new approach to low force testing at an affordable price. The rigid frame, top acting detachable actuator, detachable electronics and several motor/drive combinations allow for a variety of machine configurations. The actuator and electronics can also be sealed from moisture and airborne particles so that it can operate maintenance free in the harshest of environments. The eXpert 560x performs tension, compression and bend tests from less than 1 lb to 1,400 lb. Some models are capable of speeds in excess of 5,000 mm/min and can be used in high speed dynamic testing.
|
|
Model Unitherm 1161V
* Ambient to 1650°C
* Single or dual sample
* Absolute digital displacement transducers (no LVDT)
* Research quality
* Vertical model for sintering studies
* Vacuum, inert and hydrogen atmospheres
|
|
|
|
|
|
This affordable, versatile test system is ideal for general production and quality applications fulfilling all but the most rigorous testing needs. The 95F Series tensile testers combine the full digital controller ComTouch Total Control with the economical 95 series tensile test stand.
This variable speed test stand has up/down/stop motor control, crosshead jog, emergency stop, speed dial, and a high speed return.
All the information regarding your tests is reported on the touch screen display: force, deflection, test stand direction, limit switch warnings, test stand speed, and error messages. Designed to be rugged, sturdy, and easy-to-use, this test stand is built to last. Automation and reporting is achieved through the ComTouch controller included with the system. This touch screen driven unit controls the 95F series test stand for automated testing. This system is ideal to test easily plastic, rubber, fabric, and metal, ceramic, composite...
Just select from our wide line of fixtures for standard tensile testing or install an optional compression cage for testing in compression.
|
|
The RHEOTENS ONLINE is a fully automatic and continuously operating on-line tensile tester developed on the basis of the lab system RHEOTENS. RHEOTENS ONLINE, in conjunction with the on-line Capillary rheometer MBR, is the first on-line testing system providing both shear and elongational information.
Key Features:
As with the known laboratory system Rheotens, the polymer strand is being drawn under constant acceleration. The stress/elongation test can be performed within freely selectable test frequencies. The system offers most possible safety in operation.
Die characteristic measuring units like maximum tensile force Fmax ("Melt Strength") and the finite elongational ratio "lambda" (extensibility), are continuously monitored and can be evaluated statistically.
|
|
|
|
Material testing machine: compression, tensile, bending, ...
