|
|
Vibrophores
For fatigue testing of materials or components by applying sinusoid loads Zwick Vibrophores offer an economical alternative using the resonance principle with constant or variable amplitude and mean load.
The Zwick vibrophores combine a maintenance-free system with maximum testing speed at minimum energy requirements.
The wide range of nominal loads (from 5 to 500 kN) enables the widest variety of dynamic tests according to the resonance principle.
With suitable add-ons, testing can be carried out under different environmental conditions (temperature, aggressive media), or torsion or bending tests can be performed. Testing can be performed either force controlled or strain controlled. And, of course, testXpert® will support you with harmonized standard and master test programs.
|
|
|
The Link Model 2500 Rotary Fatigue Machine is designed to reproduce the forces acting on wheel and brake components as seen in vehicles by controlling the magnitude of the cornering forces consistently to determine the integrity of the test components. This machine is capable of testing rotors, wheels, bearing packs, axle extenders, etc. by mounting the test components vertically to a rotating table and applying a varying load at an adjustable angle.
|
|
Ear Measuring Instrument, Model 126
Used to obtain a numerical value of the size of the ears resulting from anisotropy in the material of cylindrical deep-drawn cups (e. g. according to DIN 50 155). The average cup height, the height of the ears in percent and in mm can be read-off at a touch of a button and are shown on the digital display instrument. To enable additional data processing the test instrument can be equipped with interfaces, such as BCD or RS 232 C outputs and with a printer.
|
|
Hydraulic universal testing machine
Thousands of applications worldwide prove that the hydraulic universal testing machines are with top quality, high accuracy and high reliability. It is ideal products for Q.C, Q.A. and R&D.
From the applications, the load frame includes:
1.Actuator at bottom
2.Top actuator
3.Load cell measured
4.Pressure transducer measured
5.Dual testing spaces
6.One testing space
7.Load capacity from 50kN up to 3000kN
Whenever you need quick operation or high accuracy servo control test, there is one suitable machine that can meet your requirement for different materials.
|
|
Model: SHT5205P; SHT5305P; SHT5506P; SHT5605P; SHT5106P; SHT5206P
Capacity: 200kN; 300kN; 500kN; 600kN; 1000kN; 2000kN
Features:
SHT5000P series are based on SANS SHT5000 series servo hydraulic testing system and improved with side action grips.
This series adopts international advanced side action grip technology and solve the problem of load dropping during large force test and high frequency batch test. Gripping force is auto controlled and stable for tensile test of high strength, high hardness materials, stranded wire, and other hard-to-clamp specimens.
Dual side action allows synchronous clamping specimens and ensures precise center alignment. This deign can also eliminate lateral force on specimens before test which is common in wedge action grips.
|
|
|
|
|
|
1. Performance Characteristic:
The resolution is 500000 Codes, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Have various control methods and curve forms(Include the true stress-strain), The trial report is programmable.
2. Basic configuration:
One host machine, one servo oil source, one computer of the upscale brand, one A4 color Ink-jet printer, one Germany DOLI EDC-220 apparatus for measuring and controlling, one displacement transducer, ATOS servo valve, one extensometer, one table for meter, accessories.
3. Main Specifications:
3.1. Max. testing tensile force:2000kN
3.2. Range of load measurement:20-2000kN
3.3. Accuracy of testing force reading:±1%
3.4. Accuracy of displacement reading: ±1%
3.5. Load resolution:250000 steps
3.6. Displacement resolution: 2%u03BCm
3.7. The speed of the piston:0-150mm/min
3.8. Rated pressure of pump:25Mpa
3.9. The max tensile space:0-1200mm
3.10. Amount of column:4 pole
3.11. Stroke of piston: ±350
3.12. Dia. Of gripping for round specimen: %u03A615-70
3.13. Thickness of gripping for flat specimen: 5~50mm
3.14. Size of down and up flat: 280×280mm
3.15. Dimension of frame:1400×920×5060mm
3.16. Hydraulic resource dimension: 1100×900×1200mm
|
|
|
|
|
|
Electro-hydraulically driven Weld Seam Testing Machine, Model 138
A testing machine made to the demand of several customers, to determine the properties of weld seams of Tailored Blanks. These are sheets "made-to-measure" enabling the production of components with optimum weight and function used to a great extent in the manufacture of automobiles to reduce weight. The high-strength metal sheets used require a high punch force for the deep-drawing test. The weld seam testing machine is a special version of our Universal Sheet Metal Testing Machine, Model 142-20, and is provided with a drawing force of max. 200 kN. The four-column frame with integrated test tool enables the test of sheets up to 300 mm wide. The infinitely variable blank holder force can be read on a pressure gauge whilst the deep-drawing index and the required drawing force are displayed digitally. The sensitivity of the integrated crack detector can be adjusted to the sheet metal quality by way of a potentiometer. After specimen failure the machine returns automatically to its initial position. To evaluate and store the measured data, it is possible to connect the machine to a PC using the corresponding interfaces. The Windows based software calculates and displays the measured values from the ERICHSEN cupping test, e. g. index E, elongation at rupture E in %, tensile strength E, n-value E. Furthermore the force-displacement diagram is recorded. Several tests can be shown in a chart.
|
|
Electromechanical Universal Testing Machine
Thousands of grips and standards for metal and non-metallic used in the worldwide of electromechanical universal testing machine provide a suitable solution of your demands.
From the applications, the load frame includes:
1.Single column
2.Dual columns with single testing space
3.Dual columns with dual testing space
4.Table and floor
5.Grips and software meets ASTM, ISO, DIN JIS, GB standards 6.Environmental test from -400 Deg. to 1100 Deg.
7.Load capacity from 1kN up to 600kN
|
|
|
|
|
|
This machine is mainly used for various materials of tension test, such as metal wire, thin plates, rubber, plastic, composite material, waterproof material, paper, spring, textile, yarn, wire and cable, and for all kinds of adhesive tapes of 90, 180 peel test. The material mechanical property can be obtained automatically according to different criterions, and a complete test report and curve can be printed out.
The Panasonic digital servo is introduced in control system of this machine, and equipped with high accurate pretightening ball screw for driving crosshead, photo-electric encoder for displacement feedback.
Adopt many passages of total digital CTS-500 system of AUTO measuring and controlling , having no the class to adjust, The reading accuracy is ±1% , The speed accuracy is ±1%,The displacement accuracy is ±0.5% , The resolution is 250000 Codes, equal to 7 sections, no subsection in full-measuring, Satisfy the related material experiments the method standard, Control and show automatically in experiment process, Can print the result of experiment, Have various control methods and curve forms, (Include the true stress-strain), The trial report is programmable.
|
|
|
The ADMET eXpert 26xx series twin ballscrew universal testers are designed for users who want the power of a full-size system and the versatility to test materials, components and structures. Offered as bench top testers with capacities to 50KN , the eXpert 26xx series machines tackle the toughest tests with their superior axial alignment, stiffness and crosshead guidance. The ADMET floor standing models feature wide column spacings to accommodate larger grips and fixtures, temperature chambers, special test fixtures and full-size parts.
|
|
|
The eXpert 760x line of compact table-top universal mini-testers is designed for users who want the flexibility of a full-size system without the high cost or space requirements. From 1KN up to 10KN capacity, the ADMET single column bench top models provide the flexibility to test biomaterials, wire, textiles, packaging, elastomers, plastics, films, foils and other materials with confidence. Compact in design, some units fit within a 16 x 12-inch space while others use just 17 x 20-inches of bench top space.
|
|
To measure force vs. distance relations for material, component or connection testing, Alluris offers a rugged and versatile 1-columne universal tester with high precision and in reproducibility. The major advantage of this machine is the easy to use man-maschine interface and a number of defined test standards, which allows testing directly aside the manufacturing line, without any need of special testing laboratory knowledge.
> Flexing test (Force vs. distance graph)
> Break test (Single or multi testing)
> Compression test (Force or distance controlled)
> Tensile test (Force vs. distance graph)
> Pull test (Single or multi testing)
> Elongation test (Force- or distance controlled)
|
|
The TEX 555 test stand is ideal for low and medium force testing when a quick result is required. This manual test stand makes accurate and repetitive tensile and compression tests for springs, crimps, foam, peel and crush applications. The TEX 555 test stand features a revolving hand crank, small footprint, durable design and portable.
Combined with our Centor force gauges, the manual test stand TEX 555 can measure up to 2500N in production or laboratory for an affordable price. It’s available in vertical or horizontal orientations with table or wall mounting fixtures. Travel limits, digital ruler and auto-return spring are available in options.
|
|
|
For precise repeatable and reproducible measurements, test stand is necessary in order to keep same test condition. It also negates the need for heavy manual labor when applying large forces, and makes the task of obtaining measuremnets more efficient.
|
|
The console-controlled range of MultiTest-x test frames display load, displacement and speed. Simple test programs can be created and stored.
The MultiTest-x has been designed specifically to meet the requirement for ease of routine use in QC laboratories, or production environments which are often not ideal areas for using a PC.
|
|
Technical Highlights:
- Push- & Pull Capacity: 30,000 N
- Robust Quality and Easy-to-use operating philosopie
- Maximum speed up to 600 mm/min
- Maximum travel distance up to 500 mm
- Safety shutdown by limit switches
|
|
Friction Testers 1 kN (225 lbf)
NEW PRODUCT: Dedicated Friction Tester for Accurate Measurement of Static and Kinetic Coefficient of Friction
For use in the packaging and printing industries, the Lloyd Instruments FTPlus friction tester accurately measures static and kinetic coefficient of friction. These values are of importance in a wide range of industries including blown film, plastic sheet, paper and coating manufacture.
The FTPlus is a dedicated friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549. The tester includes these standards as user configurable tests, with a further seven available for user custom configuration.
When using NEXYGENPlus material test and data analysis software , the FTPlus may also be configured as a universal material tester to perform tensile, compression, flexural and other mechanical tests up to 1 kN (225 lbf).
|
|
|
|
|
|
Model: CMT2501;CMT2102;CMT2202;CMT2502;CMT2103;CMT2203;CMT2503
Capacity: 50N; 100N; 200N; 500N; 1kN; 2kN; 5kN
Features:
SANS's line of desktop Electromechanical Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities are from 50N to 5kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
6. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
|
|
Slip and Friction testing aids in the evaluation of chemicals and additives used to create or minimize the degree of friction between two contacting test specimens.
APPLICATIONS
Paper, Flexible Packaging, Foils, Rubber, Plastics, Wood,
Linoleum, Metal, Printing, Coatings, Composites
SPECIFICATIONS
* Selectable speed from 5 to 43 cm per minute (2 to 17 inches per minute)
* Selectable travel distance from 2.5 to 30.5 cm (1 to 12 in.)
* Meets TAPPI T816, T549, and ASTM D1894
FEATURES
* Digital display, storage and editing of up to 100 readings, and selectable units (COF or grams)
* Settable limits
* Statistics-average, standard deviation, high/low results.
* Report printout with built in printer
* RS-232
* Static and kinetic coefficient of friction calculated in one operation.
* Direct drive arm with unique skid control.
* Sled-connecting mechanism ensures level pulling action.
* Easily interchangeable sleds.
* Full color easy to read Display
|
|
|
|
|
|
This machine is mainly used for mechanical property test of concrete, high-strength concrete cement products and other materials.
Loading by high accurate hydraulic valves in this machine, the test space is adjusted by motor screw, and loading can be controlled by manual or automatically. This machine is controlled full-automatically by computer. The whole test process is completed according to stress rate of present curve. The load, speed, data and test curve can be displayed in dynamic.
Performance Characteristic:
The reading accuracy is ±1%, accuracy of loading speed is ±1%, auto closed loop control are processed by computer, loading speed is set discretionarily, loading is reposeful, controlled performance is good etc. Test data can be automatically processed, test report and curve can be print.
One host machine, one computer of the upscale brand, one A4 color Ink-jet printer, a set of high quality servo valve.
Adopts double-column host machine structure below 600kN.
Another EUR 56.00 is paid for an added Grip for concrete four points bend.
|
|
|
This system is used mainly for performance of tensile tests on metals as per DIN EN 10002-1. The modular system consists of the materials testing machine (e.g. Zwick Z050) and an automatic specimen feeding system in portal design with a triple-axis robot arm. Add-ons such as the cross-section measurement unit, roughness measurement unit, coating thickness measurement unit as well as a hardness tester complete the system. The specimen magazine can hold up to 400 specimens.
|
|
Model Unitherm 1000 Series Dilatometer
* -150°C to 300°C furnace, RT to 1200°C furnace
* Dual furnace option
* Up to 4 samples
* Polymer furnace for plate type specimens
* ASTM E228, D696
|
|
The newly developed DIL 402 PC dilatometer combines easy operation, high adaptability to different applications and outstanding performance in one instrument.
The optimized design of the measurement system with inductive transducer offers a high degree of reproducibility even without an external chiller.
The horizontal design with easy to move furnace makes it simple to place samples into the large recess of the tube-type sample carrier, even with less than ideal sample geometries. A thermocouple in direct proximity to the sample yields reproducible temperature measurement. This also allows use of the c-DTA® Software for calculation of endothermic and exothermic effects in the sample as well as determination of all the characteristic expansion values.
The interchangeable furnaces with temperature ranges up to 1200°C and 1600°C serve varied applications for expansion control in solids in the areas of quality and production control.
|
|
Tensile testing is the most widely used method for indicating the serviceability of many papers. Tensile Energy Absorption (T.E.A.) indicates the durability of papers which are subjected to repetitive straining and stressing. The Horizontal Tensile Tester offers menu driven pre-selection of parameters and infra-red sample detection for quick, effortless testing.
FEATURES
- Test statistics generated at the push of a button
- Load cell protected
- Auto return after test complete
- RS232 serial data output
- Wet test option
- Serial Printer output
- Multi-language standard
- Menu driven pre-selection of parameters and infra-red sample detection
- Two pre-set test types are machine direction and cross direction
- Optional software can add hand sheet tensile test
|
|
|
|
|
|
The 600 kN Hydraulic Testing System with Single Side-Acting Hydraulic Grips is completly customizable, the grips are ideal for tensile testing of stranded wire or cable and uniquely feature longer jaw faces to better accommodate gripping. These longer jaw faces are extremely important for tensile testing, as strands can easily slip from conventional grips, ultimately affecting the integrity of the test and test results.
Cost-effectively designed with multiple testing system configurations including tension, compression, bend, shear and flexure, Instron’s KN Series Universal Hydraulic Testing Systems allow for a flexible single test space. The versatility of design also enables the user to easily add test stroke or increase the test opening and the testing space is easily accessible due to upper actuator design.
For increased operator and equipment safety, Instron’s KN Series ensures that the actuator does not travel past the limits of its design. Superior accuracy is provided by Instron’s load cell system and zeroing capability. The variable pressure power pack provides pressure on demand, reducing heat generation for increased oil life, decreasing maintenance and eliminating the need for water cooling.
|
|
Model: SHT4305W, SHT4605W, SHT4106W
Capacity: 300kN, 600kN, 1000kN
Features:
1. Dual test space provides compression in lower space and tensile test in upper space.
2. Half-open hydraulic grips is easy to place specimens and has high rigidity.
3. Lower crosshead is driven by worm wheel with high stability.
4. Spoke shape load cell is connected with piston, which ensures high precision measurement.
|
|
|
|
|
|
|
The machines adopt main unit, which is exported to Shimadzu Corporation Japan for the production of UH-F100A.It use Electrohydraulic Servo oil source, and servo valve imported from Japan. With reasonable construction, beautiful out-looking and high stability. With PC control system, they can realize the close loop control of test load, deformation of specimen, displacement of piston and test processor, and the screen display function of test load, peaking value, specimen deformation, piston displacement. The data processing result can be printed out and can be stored on disk in form of ASCII and can be transmitted through network. Especially the machine is supplied with analogue intelligent setting specialist system. The machine is mainly used to do tensile, compression, bending and shearing test for metal and non-material materials. The customer could set the test control mode automatically according to their requirement so as to conform the customers' special requirement.This series is mainly designed for compression and bending test of building material items, such as concrete, cement specimen and component, etc, also used for compression performance test of rubber pad and top forge test of metal.
|
|
|
Hydraulic static universal materials testing machines with seven different frame capacities to a max of 3,000 kN
|
|
Servo-Hydraulic Testing Machines
The ExPress line of machines are a bold new approach to servo-hydraulic machines for static testing. Manufactured to exacting standards, these machines are accurate, tough and cost less than conventional hydraulic testing machines. ExPress frames employ strain gage load cells for direct measurement of force. No need to compensate for piston friction and other non-linearities, these frames offer exceptional accuracy and precision while reducing long-term calibration and service costs.
ExPress frames feature a simple design based upon off-the-shelf components for lower cost, faster delivery and long-term availability. Our conservative design is based upon continuous testing to maximum load for years of maintenance free operation. The hydraulic power supply and electronics are integral with the frame thereby saving valuable lab space.
|
|
|
|
|
|
WAW series are ideal for high-capacity tension, compression, bend/flex, and shear testing. It accords with the relative requirements of ISO, ASTM, JIN, GB and many other testing methods. These frames feature dual spaces so users can quickly change between tension and compression testing without having to remove heavy fixtures.
The oil cylinder is set on the bottom in this machine, the test space can be adjusted automatically by motor, hydraulic damp automatically, and with 4 adjustable columns.
The reading accuracy is ±1% , the accuracy of extensometer is ±0.5% ,Auto process data of Experiment with a computer, Satisfy the related standard of material experiments , Dynamically display load, elongation, load speed and real time trial curves, automatically calculate Rm (%u03C3b), %u03C3s, ReH (%u03C3su), ReL (%u03C3sl), Rp0.01 (%u03C3p0.01), R p0.05 (%u03C3p0.05), Rp0.1 (%u03C3p0.1), Rp0.2 (%u03C3p0.2), E and so on, can print on trial report and curves. Adopt digital frequency conversion to load, the speed is steady, consume of power is small, the noise is low, oil temperature is low for working long hours, operation is simple, safe and dependable.
|
|
|
|
Material testing machine: compression, tensile, bending, ...
