|
|
Protective caps for shafts GPN 290
For the protection of shaft ends and for securing the feather key.
Protective covers for loop ends GPN 695
For loop holes. Perfect fit through internal sealing ring.
Dust caps and plugs for quick-seal couplings GPN 920
For quick-seal couplings. Integral retaining strap prevents accidental loss.
Dust caps and plugs for quick-seal screw couplings GPN 930
For quick-seal screw couplings; prevents the leakage of residual oil.
Fast-fit caps GPN 940
Fast-fit caps with flap for valves, external threads and bolts.
Grease nippel caps GPN 980
Protect the conical head , mark the greasing point, secure fit provided by the undercut around the nipple head.
Grease nippel caps GPN 985
Easy removal by the conical head.
|
|
|
The range of Skiffy caps and plugs is extensive and applicable for unlimited number of occassions, fasteners and tubes: protection caps and plugs, grease nipple caps, tube plugs, torx caps, cover caps, decorative plugs, ribbed inserts, etc.
|
|
|
PLASTEM is at your entire disposal for plastic caps, pull caps, flange protection, plugging, end caps, bolt caps, nut caps, screw caps, plastic protectors, caps plugs, blanking plugs, covers, protective closures, industrial closures, bumper pads, wheel inserts, piston lids, piston lids rectangular Trutzschler Schlafhorst, piston lidsrectangular Rieter for spinning can. We are distinguished by assuming responsibility for engineering plastic product and complete projects from engineering with study and realisation of moulds to the manufacturing.
|
|
Flange covers GPN 640
For the protection of SAE flanges during painting, transport or storage.
Flange covers GPN 650
Seals the aperture and protects the sealing face of DIN-type flange fittings.
Flange covers GPN 655
Seals the aperture and protects the sealing face of ISO-type flange fittings.
Flange covers GPN 670
Broad range of applications through fins; sealing face and screw holes are protected.
Flange caps GPN 680
Hook-snaps provide secure fits during handling.
Protective caps GPN 690
For the protection of SAE flange collars, pipe ends and hose-fittings. Easy and secure fitting.
|
|
Alliance Plastics is the leading supplier for flange protection applications. We have the broadest selection of flange covers for full-face or raised-face requirements. With nominal size protection from ½” to greater than 48," actual diameter and material preference of PE, pressboard, EVA, or corrugated LDPE, Alliance Plastics maintains the largest selection of protective covers for flanges in accordance with ANSI/ASME B16.5 standards.
We continually strive to add new and expanded products to fit a broad range of customer applications.
We also carry a large section of no-fastener needed flange protectors for standard and high pressure code-61 and code-62 requirements. With the availability of fastener accessories and cable ties for securing purposes, we cover the best selection of protecting standard industrial flanges.
|
|
|
Caplugs Sleeve-Web® plastic netting is manufactured in tubular styles to protect smooth, threaded, or cylindrical parts, and in sheets for flat, irregular, or nesting parts. This extruded mesh webbing is also available for compressed air cylinders.
|
|
Plastic protective netting in polyethylene. Ideal for protection during shipping & handling and extra packaging.
Avalaible for parts from 1/4" (6.4mm) up to 12" (304.8mm).
|
|
|
Alliance Plastic’s has a full offering of industrial protective netting now fully stocked at all of our Alliance locations in the U.S. and Canada. Our FNC and FNH series can be used to protect virtually any form of product from damage during storage or shipping. Due to the exceptional design each part is capable of protecting a range of sizes which will cut down on a lot of excess inventory. Each size is varied by color so you could visually identify your specific parts by the color of the netting. The FNC has 7 colors for 9 sizes ranging from ¼” to 12” diameter and the FNH has 4 colors for 9 sizes ranging from ½” to 8” diameter. Colors include red, orange, blue, yellow, red, green, brown, and natural. For those applications where more durability is needed, we’ve got you covered with our FNH series which is a heavier gauge material. So if rework costs and customer returns are getting out of control it’s time to contact Alliance Plastics for samples of our protective netting
|
|
|
Round and square caps. Paint cone caps and paint protections in different dimensions. For further informations visit our catalogue.
|
|
Floor leveling plugs GPN 265
Vertical adjustment by an adjusting screw with an extra strong hexagonal top.
Grip seals GPN 335
For the transportation and storage of hose fittings.
Dust caps and plugs for quick-seal couplings GPN 920
For quick-seal couplings. Integral retaining strap prevents accidental loss.
Dust caps and plugs for quick-seal screw couplings GPN 930
For quick-seal screw couplings; prevents the leakage of residual oil.
|
|
Unthreaded protective caps
Threaded protective caps
Square and hexagonal protective caps
Unthreaded protective stoppers
Threaded protective stoppers
Square protective stoppers
|
|
Tildmesh is an economical and effective method of
safe guarding crops against pests without the use
of harmful insecticides.
Crops must be covered immediately after sowing.
Transplants must be free of pests before covering.
This is best achieved by raising the transplants
under Tildmesh. Some soil pests such as Carrot Fly
can survive in the soil between crops. Covered
carrots should therefore only be grown in rotation
with non-umbelliferous crops.
|
|
|
Pull tab caps in flexible yet durable vinyl plastic. Ergonomic tab for easy removal. Custom colours and materials available.
|
|
Why seal drains permanently with cement? Use our Conical Drain Plug instead.
- Seals drains from 2" to 4" in diameter
- Removable-allows your drain to function normally when plug is not in place
- Non-mechanical-just wedge Plug in drain; ideal alternative to permanently sealing your drains with cement
- Durable polyurethane plug forms a tight, chemical-resistant seal; removes easily with hand tools to restore drain function
- Perfect for general maintenance use-you can keep the Plug in the drain with the drain cover in place
|
|
Round tubing plugs in low density polyethylene. Also available as square and rectangular shapes, both metric and imperial sizes.
Heavy end walls for durability and abrasion resistance.
|
|
Screw caps
Material: LDPE - PA (Ref: RAK)
ColOur : Black, White, Natural (Ref: RAK)
Other colours on request
Dimensions : mm
- CACHE VIS are intended to protect and cover screws and rivets
|
|
Silicone caps and plugs for high temperature surface treatment masking (especially powder coating).
Also available in EPDM for chemical resistance.
|
|
Material : SILICONE / EPDM
Colour : Natural / Black - Colour on request
Dimensions : mm
The silicone caps are ideal when temperature resistance is required (316°C)
The EPDM caps are ideal when lower temperature resistance is required (246°C)
|
|
CAPUPVC RO CA RE
Material: PVC
Colour: Black - other colours on request
Dimensions : mm
CAPUPVC RO are intended for outside round protection
Ideal when smooth finish is required
Flexible caps fit easily onto irregular sizes (cable end seals, connectors).
The lenght can be modified to your requirements
|
|
Square plugs GPN 260
For special section tubes, press fit by means of distinctive disks.
Floor leveling plugs GPN 265
Vertical adjustment by an adjusting screw with an extra strong hexagonal top.
Rectangular plugs GPN 270
For special section tubes, press fit by means of distinctive disks.
|
|
Screw caps GPN 800
Available in a wide range of thread types and sizes.
Screw caps GPN 801
Available in a variety of different thread types and sizes.
|
|
Alliance Plastics offers one of the most versatile and complete threaded cap and plug ranges in the industry with 45 styles to choose from. These styles are designed to protect your mating threads from nicks or dings that may occur anytime up to final installation. Our threaded caps and plugs mate with all of the world’s most common thread styles which include:
Imperial/Standard threads (UN, UNF, UNS, UNC and SAE) - 17 styles
4 styles that seal for superior leakage protection
Metric threads - 8 styles
1 style that seals for superior leakage protection
NPT Threads - 7 styles
1 style that seals for superior leakage protection
JIC Threads - 6 styles
BSP/Gas threads - 5 styles
1 style that seals for superior leakage protection
UNJ/UNJS - 2 styles
|
|
|
Caplugs manufactures a complete line of plugs designed to protect virtually any product for virtually any application. We offer protective plugs manufactured from plastic (low or high-density polyethylene), FlexTemp (for high heat resistance), silicone rubber, aluminum, paper, and vinyl. Our selection includes tapered and threaded plugs, flange covers, and static protective plugs for product protection during shipping, packaging, or production processes. Whether you're protecting female threads, tubes, pipes, fittings, connectors, sheet metal, O-ring ports, furniture, or a part requiring a custom solution, Caplugs has the plug you need.
|
|
Threaded plugs GPN 700
Available in a wide range of thread types and sizes.
Threaded plugs GPN 710
With collar and slotted external square for simple assembly.
Screw plugs GPN 720
Retractable screw-stopper with hexagon socket.
Sealing plugs GPN 730
The rotating sealing lip, within certain limits, prevents the admission or leakage of liquids.
Sealing plugs GPN 735 / 736
Thread openings are protected from the admission or leakage of liquids, within certain limits.
Sealing screw plugs with O-ring GPN 737 / 738
The sealing screw plug corresponds to GPN 735/736, but is additionally fitted with an O-ring.
|
|
Alliance Plastics offers one of the most versatile and complete threaded cap and plug ranges in the industry with 45 styles to choose from. These styles are designed to protect your mating threads from nicks or dings that may occur anytime up to final installation. Our threaded caps and plugs mate with all of the world’s most common thread styles which include:
Imperial/Standard threads (UN, UNF, UNS, UNC and SAE) - 17 styles
4 styles that seal for superior leakage protection
Metric threads - 8 styles
1 style that seals for superior leakage protection
NPT Threads - 7 styles
1 style that seals for superior leakage protection
JIC Threads - 6 styles
BSP/Gas threads - 5 styles
1 style that seals for superior leakage protection
UNJ/UNJS - 2 styles
|
|
The use of SFW/WP pressurised breather cap which create a pressure plenum chamber right above the oil level within tested limit conditions, in order to avoid any reservoir deformation, offers the following advantages:
- reduces reservoir air volume intake keeping clean oil and filter
- improves suction pump action during working conditions reducing cavitation phenomenon
- prevents fluid leakage when the system is part of a mobile unit
- reduces foam in fluid.
|
|
| ... products without technical information |
| |
|
|