|
|
Tilt-Or-Lift's Newest Four-Post Maintenance Lift
The new V-30-ALRS Lift-A-Lift® was designed for use by warehouse maintenance departments to service forklifts, reach trucks, stock-pickers, pallet trucks, sweepers, scrubbers and personnel carriers.
Capacity: 30,000# G.V.W.
Approach ramp: 12' long
Runway length: 16'
Runway width: 18"
Entry width: 76"
Hydraulic width adjustment: 56" to 76"
Maximum runway height: 71"
Power: 230/460/3/60
Shipping weight: 8,900#
|
|
|
|
|
|
CAR-LIFT
Car-lift is used for the vertical and horizontal transfer of cars - without driver - between several levels of storage or exhibition in a car agency. The driver is only allowed to drive the car on and out the platform.
Car-lift must be equipped with securities in conformity with law or must be embedded in built concrete shafts or metallic cage with plain walls and doors equipped with electro-mechanical interlocks.
Main characteristics of the car-lift shown on the photo :
Lifting capacity : 2000 daN
Platform dimensions : 5,000 m x 2,500 m equipped with safety handrails
Collapsed height : 0,700 m
Vertical stroke : 3,000 m
Particularity of this configuration : The car-lift includes an automatic safety locking device in its high position. It maintains the position of the platform and secure the transfer of cars.(......)
Main options : galvanization, all optional safety equipment, transport facilities, set up and commissioning, maintenance contract....
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Vertical transfer of any kind of vehicles : industrial, for roads, army,... inside or outside buildings, parking, museum, exhibition room....
|
|
Elevated work platforms are often used for the assembly of large machines, in the car industry, airplane manufacture and generally for any work at variable or adjustable heights.
Elevated work platforms comply with EN 280 norm.
Particularly stable thanks to their design, they give their users the possibility to work at the correct height, safely, for long hours, almost as if they were working on the ground.
|
|
TRACKED AERIAL PLATFORM LIGHTLIFT 19.65
Among the small platforms, this is certainly the most advanced as regards both performance and technology.
Even though it is only 78 cm wide and its height does not exceed 2 m, it reaches an operating height of 19 m, with a max. operating outreach of 6.5 m.
It is equipped with engine and a 220-110 volt electric motor.
Covered by three exclusive HINOWA patents.
1) Retroactive control of engine/motor rpm that allows the speed of the
various movements to be set by adjusting the engine/motor revolutions.
2) Load cell that slides vertically on recirculating ball bearings, in such as
way as to eliminate any friction and ensure perfect load control, thus
increasing the operator’s safety.
3) 360° swing mechanism.
And also: remote control panel – electronic level – double load cell
120÷200 kg.
|
|
|
Autoquip Vertical Ram Lifts are utilized when a scissors lift is not a option, either due to high axle load requirements, high travel requirements, high load requirements - or some combination of all three. Vertical hydraulic ram lifts are designed to handle the most awkward and heaviest loads and can reach heights where scissors lifts become unstable. Vertical Ram Lifts offer inherent simplicity with the typical configuration having one or two hydraulic rams supporting a rigid platform. Completely customizable, these hydraulic ram lifts have very few moving parts and offer the greatest flexibility as to platform size, travel and capacity. The Vertical Ram Lifts require a pit and usually become permanent installations. Autoquip Hydraulic Ram Lifts are ideal for concentrated, rolling loads of all kinds, and can be used as a loading dock or for in-plant applications.
|
|
FIXED LIFTING PLATFORM WITH TANDEM SCISSORS
Lifting platform with tandem scissors, equipped with handrails and reinforced PVC skirts, for the leveling of operators in the aeronautic industry.
Main characteristics of the fixed platform shown on the photo :
Lifting capacity : 400 daN
Platform dimensions : 4,000 m x 1,500 m
Collapsed height : 0,210 m
Vertical stroke : 0,790 m
Main options : particular covering (wood floor, carpet,...) input socket, compressed air circuit with rapid connections, light, galvanization...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Ergonomic leveling of operators on production lines to ease the assembling of parts or of equipment....in all kind of activities and manufacturing.
This particular design, as two standard lifting tables linked together with tandem scissors, allow the lifting of heavy and bulky loads - while being at a low collapsed position.
|
|
|
|
|
|
SPECIAL LIFTING TABLE
The special lifting table is set on a vertical electric horn and lift operators in order they can supervise the thermal treatment of parts.
Apart from that operation, the special lifting table is stocked in another place.
Main characteristics of the special platform shown on the photo :
Lifting capacity : 500 daN by 3 operators without any equipment or tool
Platform dimensions :
Outside diameter : 5,400 m
Inside diameter completely free : 3,400 m
Platform with drop steel plate
Basic frame adapted to the round platform / platform for operators
Six feet and 3 supports adapted to the existing supporting areas of the horn
Collapsed height : 1,280 m including 0,680 m for feet
Vertical stroke : 1,750 m
Lifting system by three double superposed and synchronized scissors at 120°C
Main options : galvanization, internal compressed air circuit or breath air or paint or water circuit, ATEX equipment, radio-controls, any adaptation : mechanic, hydraulic, electric and surface treatment.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking items to fill in or to empty containers...
|
|
|
These two EZK models understand themselves as pure Kommissionierfahrzeuge. Whether in the 2-Mast or shears stroke version, the Kommissionieren from profiles to 8 m length or disk commodity from 600 mm to 2100 mm of depth is with these stackers possible. The commodity can be taken thereby problem-free reciprocally under way out of the shelf. The 2-Mast-Modell convinced by the particularly low platform height, this lies with the shears stroke version more highly. In response the shears stroke version possesses the preference/advantage of a smaller overall length. Optionally a shifter is available, in order to facilitate the withdrawal with a separate stacker of the finished customer Kommision for both models. Also the EZK models fulfill the HUBTEX standard of durable hubmasten, ergonomic jobs, three-phase alternating current technology and HUBTEX information terminal with color diagram display.
|
|
MATERIAL LIFT
Since the introduction of the original Genie® Hoist in 1966, Genie has been developing sound lifting products for the workplace. Genie® lightweight, low-cost material lifts are designed to enhance your productivity with highly portable solutions for a wide variety of applications.
All Genie® material lifts are easy for one person to set up, operate and transport in a standard pickup or service truck. Plus, a wide variety of options and accessories amke them extremely adaptable to fit your specific needs. With sturdy construction and reliable performance, Genie® material lifts are an excellent value for a virtually unlimited number of indoor and outdoor uses.
Choose from 17 models with lifting height from 1.8m to 7.94m and lifting capacity from 91kg to 454kg.
|
|
The type-approved containers for overhead maintenance are lifted with a forklift truck, guaranteeing maximum operator safety. They are also fitted with a tool tray.
|
|
|
|
|
|
PERSONNEL LIFT
Genie® portable personnel lifts are easy to use and cost efective, making them the first choice for a wide range of applications. One person can easily set them up and get to work within minutes, providing the ideal all-around toll for almost any access application. Their light weight and compact size make Genie® portable personnel lifts convenient to use in schools, churches, warehouses and more. Genie® portable personnel lifts also provide solutions for internal work on large construction sites, like high rises, as well as being perfect for light-duty construction purposes.
Genie® portable personnel lifts are designed to enhance productivity in the workplace. Flexible features on the AWP™, IWP™ and DPL™ models offer convenience at a low cost. Their lightweight construction makes them easy to manoeuvre, use and transport, delivering maximum uptime. Each model offers a variety of options and accessories to customize your machine. Genie® portable personnel lifts offer and economical solution for all your access needs.
Choose from 11 models with working height from 8.12m to 14.29m and lift capacity from 136kg to 340kg.
|
|
AHWP Personnel Lifts
Whether it is impractical or impossible to bring the work to the worker, AHWP personnel lifts provide a convenient way to raise workers to perform their tasks. They are ideal for servicing large, immovable machinery, working off a conveyor line, product assembly, and other plant maintenance and operations.
AHWP personnel lifts can be used when ladders are too risky, and when forklift-mounted cages are not practical. It functions smoothly and dependably regardless of unequal weight distribution.
|
|
Permanent suspended platform
The PERM 04-05 permanent suspended platforms are designed for building maintenance.
Installed permanently on buildings, they provide safe access for cleaning work.
The PERM 04-05 platforms are available in EN 1808 version and in version outside UE.
Designed in aluminium, they do not get damaged over time.
|
|
ROUGH TERRAIN Z-BOOM
Genie® engine-powered articulating Z™-booms provide lifting versatility with a combination of up, out and over positioning capabilities and outreach that's second to none. They also offer high ground clearance, two- or four-wheel drive options and rough terrain features for easy travel over irregular ground. Ideal for outdoor construction and industrial applications, these units have working heights between 12.52m and 43.15m and reach out maximum of 6.78m to 21.26m.
The Z™-boom design provides lifting versatility with "up and over" positioning and excellent outreach. A tight turning radius and zero tailswing allow unmatched manoeuvrability in confined work areas.
Lift capacity 227kg.
|
|
|
|
|
|
Up to 4 simultaneous and proportional movements, the HA120 PX boom reaches the maximum height within 30 seconds.
With a wide basket of 1.50m (4ft 11in) as standard equipment, offering a maximum capacity of 230 kg, and fitted with a Load Managing System, the articulated boom HA 120 PX also offers an ergonomic and user friendly control panel, already very popular on the HA16PX.
The HA 120 PX is fitted with simultaneous 4 wheel drive and steer as standard, a 26cm (11in) ground clearance and a hydraulic differential lock system give exceptional all-terrain performance with a gradeability up to 45%. This allows easy access in difficult working areas and rough terrain conditions.
Its narrow turning radius (3.85m – 12ft 8in), combined with the zero tailswing give to the HA 120PX superb manoeuverability whatever the working environment. Dual parallelogram riser allows ascent and descent along a vertical plane without retraction or extension of the boom, which offers comfort and maximum productivity.
Due to the horizontal outreach of 6.60m ((21ft 8in) and its up and over clearance of 5.70m (18ft 8in), the HA 120PX can easily by-pass the obstacles, and cover a big working envelope.
The narrow turning radius, the vertical jib rotation (140 °) and the platform rotation in 180 ° facilitate use of the machine in any the working environment.
Tilt controller (up to 5°), automatic platform levelling, mechanical turret slewing hook, resistance in winds up to 45km/h (28mph) and towing hooks and lifting eyes are additional features to benefit the user.
|
|
ROUGH TERRAIN SCISSOR LIFT
Genie® rough terrain scissor lifts enhance productivity by providing exceptional traction, speed and gradeability. They are the perfect machines for big outdoor jobs where platform work space is critical.
Genie® RT scissor lifts are able to traverse through uneven or rough terrain environments more efficiently. They are equipped with four-wheel drive and positive traction control for traction when you need it most. They offer up to 50% gradeability when driving on slopes.
Heavy duty fold-down guardrails and a removable rear platform railing allow increased accessibility for loading and unloading the machine in trucks, containers and other situations with limited overhead space.
Working height from 9.92m to 18.15m
Lift capacity from 454kg to 1,134kg
|
|
The Mid-Size Series Rough Terrain Scissor Lifts combine solid and powerful design elements to meet the demands of any job site environment. All models are equipped with Skyjack’s unique axle based 4WD system which features a “Detroit Locker” type rear differential and limited slip front differential for unmatched terrainability.
Working heights for these two models are 33’ (SJ 7127) and 41’ (SJ 7135), while capacities are 1,500 lbs (SJ 7127) and 1,000 lbs (SJ 7135) respectively.
A standard 4.5’ roll out extension deck adds to the already generous platform sizes, giving a combined 75 square feet of platform space. Both models are drivable at full height, and feature 30% gradeability.
Consistent with Skyjack’s robust and reliable design features, the Mid Size Series Rough Terrain Scissor Lifts utilize Skyjack’s standard color coded and numbered wiring system with analog based controls.
|
|
The jobsite isn’t always clean and isn’t always easy to get through. With JLG RT Series scissor lifts, you have the power you need to go through mud and ruts. The RT Series has larger platforms with more than 20 ft of deck space and up to 2,250 pounds capacity.
A full range of platform heights from 33 ft (10.06 m) to 43 ft (13.11 m)
Optimal rough terrain performance
Rigid scissor arms provide the operator with the stability of a solid and sturdy platform
Smooth controls combined with fast lift and drive speeds provide improved productivity for the operator
Typical Applications
Construction (commercial buildings and infrastructure)
Mechanical, electrical, utility and painting contractors
Manufacturing and industrial facilities
|
|
|
|
|
|
The Compact Series DC electric scissor lifts offer Skyjack's renowned design elements in a compact and versatile package. Equipped with variable speed front wheel hydraulic drive, and 90° steering, both models in the Compact Series are capable of maneuvering in the smallest spaces. The SJIII 3215 and SJIII 3219 feature durable steel swing-out trays, providing unrestricted access for easy maintenance and service. Featuring a 3' roll out extension deck, these Compact Series models offer work heights up to 25', and an industry leading 600 lbs capacity, and 25% gradeability.
Consistent with Skyjack's robust yet simple design philosophies, these units are controlled by a durable, easy to service analog based controls, utilizing Skyjack's
standard color coded and numbered wiring system. The user friendly controls are fully proportional for drive and lift functions, ideal for effortless control in the tightest of places. Combining features like these with Skyjack's philosophies, the SJIII 3215 and SJIII 3219 can boast the industry's lowest life cycle costs.
STANDARD FEATURES
- Drivable at full height
- Variable speed, front two wheel hydraulic drive
- 90° steering (zero inside turning radius)
- Dual holding brakes
- Proportional controls for drive & lift functions
- 3' (0.9m) roll out extension deck
- 24V DC power source
- Low voltage battery protection
- Analog control system
- Color coded and numbered wiring system
- 25% gradeability
- Operator horn
- Solid rubber, non-marking tires
- Pothole protection system
- Forklift pockets and tie down/lift lugs
- 110V AC outlet on platform with GFI
- Tilt alarm with drive & lift cut-out
- All motion audible alarm
- Lanyard attachment points
OPTIONS
- Flashing light
- Shop airline to platform
- 800 watt AC inverter
- EE rating package
- Hinged railing system
- Half height spring hinged gate
- Full height spring hinged gate*
|
|
Skyjack continues to expand its product base by adding the new SJ 61T and SJ 66T to the SJ 40T and SJ 45T boom lifts. Built and designed using Skyjack’s robust and reliable design philosophies, the new SJ 61T and SJ 66T boom lifts continue to offer the lowest life cycle costs, proven reliability, and ease of serviceability.
Superior terrainability is obtained utilizing Skyjack’s exclusive axle based 4WD system which features a “Detroit Locker” type rear differential and limited slip front differential. Other competitive advantages include an innovative and intuitive direction sensing drive and steer control system as well as a 45 degree steering angle which results in the industry’s tightest turning radius. Skyjack’s standard color coded and numbered wiring system, along with proven relay based controls, complete a well rounded package of superior, proven, operating characteristics.
|
|
Max working height approx. : 16,85 m
Max platform height approx. : 14,85 m
Max working outreach approx : 7,50 m / 7,85 m
Turret rotation : 360°
Basket rotation : 60° + 60°
Max cage dimensions : 1,40x0,70x1,10 m
Safe working load on cage : 200 kg
Engine : Honda iGX 440 - 9,5 kW / 3050 rpm
Electric motor : 2,2 kW / 230V / 50 Hz / 1500 rpm
Max translation speed : 1,4 km/h
Max surmountable slope : 20° / 36%
Overall weight : 2000 kg
|
|
|
JLG’s vertical personnel lifts are the smallest aerial work platforms in the entire range. Provided to meet the needs of applications where space is limited and the floor load is restricted. The lifts are designed to have a minimum footprint area and can be set up quickly so there is little delay for you to start on the task ahead. The personnel lifts consist of a work platform attached to an aluminum mast that extends vertically. Platforms vary in size and capacity but all carry one person (some models carry two) with optional attachments to carry tools and materials with ease. There are three types of vertical personnel lifts available: push around vertical lifts, self-propelled vertical lifts, and self-propelled stock picker vertical lifts.
|
|
The ACT-8 work platform combines safety, power and flexibility. It distinguishes itself by its versatility and represents the best choice for contractors specialized in repointing, glazing, E.I.F.S., curtain walls installation, metal framing, etc.
Used with one or two masts, this system of cantilevers, bridges and forward extension is the solution to vertical access problems encountered during inspection, restoration and maintenance of buildings and structures. It is also an access solution for industrial projects.
The endless screw mechanism of the ACT-8 allows elevation at variable speed and an exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 50 ft (15,2 m);
* a load capacity of 8 000 lb (3 630 kg);
* a lifting speed up to 39 ft (11,9 m) per minute.
|
|
The youngest member of Fraco's family, the ACT-4 work platform combines safety, quickness and flexibility. It distinguishes itself by its multi trade profile and it represents the best choice for specialized contractors such as masons, repointers, glaziers, painters, plasterers, and general contractors involved in inspection, renovation, building maintenance, etc.
Used with one or two masts, this system of cantilevers and bridges is the solution to vertical access problems encountered during construction projects and other special works.
The endless screw mechanism of the ACT-4 allows quick elevation and exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 47 ft (14,3 m);
* a load capacity of 4 000 lb (1 815 kg);
* a lifting speed of 16 ft (4,9 m) per minute.
As another benefit, the ACT-4 has the ability to share its mast sections with the heavier model, the ACT-8; this is a new way to maximize your investment.
|
|
Designed to satisfy the needs of small- to mid-size construction companies, the FRSM-1500 work platform combines safety, lightness and mobility for all residential projects or small- to mid-size job sites or tight access areas.
This versatile platform represents the ideal tool which allows masons, painters, roof sheeters and cladders, glaziers and other professionals, to realize works of inspection, maintenance and restoration, or different types of facade projects. It can also be used for special applications.
Its ball and track mechanism calls for minimum maintenance and gives the FRSM-1500 a smooth, quick and silent operation. Assembled with one mast, this system offers:
* a maximum length of 28 ft (8,5 m);
* a load capacity of 1 500 lb (680 kg);
* a lifting speed of 14 ft (4,2 m) per minute.
|
|
Designed to satisfy the needs of masonry contracting companies, the FRSM-20K work platform combines safety, sturdiness and capacity for mid- to large-size job sites.
Used with one or two masts, this system of cantilevers, bridges and forward extension allows users to benefit from over 130 different configurations. Ideal for construction projects up to 80 ft (25 m) in height, the FRSM-20K also distinguishes itself when comfort, safety and performance in high altitude are required.
Its lifting hook mechanism calls for minimum maintenance and gives the FRSM-20K all the power required. Assembled with one mast, this system offers:
* a maximum length of 48 ft (14,6 m);
* a load capacity of 10 000 lb (4 540 kg);
* a lifting speed of 7 ft (2,1 m) per minute.
|
|
|
|
|
|
Single mast climbing work platform
As a leader in the production of mast climbing platforms, today SAFI has a range of products which covers from the smallest single mast climbing work platform for small restoration work with the “JOLLY JUNIOR” to large twin mast climbing work platforms for heavier constructions work like the “VISION 4000”, for working surfaces over 100m high and 35m long.
The strong point of all the models is the modular composition, both height-wise and lengthwise, which means enormous saving on construction site costs.
There are many versions for all types of machines : single mast, twin mast , wheel mounted for road or construction site use and special versions.
All models had the ministerial authorizations before the machine directive of 1997 and several international certificates such as the German TUV GS , the French ATS, the Italian OCE.
After the introduction of new regulations in the European Community all equipments were conformed to the safety standards and obtained the European certification from Italian and International boards with the related CE mark.
|
|
TELESCOPIC BOOM
Telescopic booms offer greater horizontal outreach than any other type of aerial platform - perfect for areas with limited access in construction and industrial applications. Genie® telescopic S™-booms are also designed for productivity with the traction and drive speed you need to get around the job site and to the work area. These models reach out horizontally between 9.65m and 24.38m, with working heights of 14.20m to 40.15m.
The 360 degree continuous rotation turnable rotates full circle for quick and flexible positioning. Minimal tailswing allows you to manoeuvre in tight work spaces.
Dual-fuel options are available for reliable, on-demand performance with the flexibility for indoor/outdoor applications.
Lift capacity from 227kg to 567kg.
|
|
Haulotte, N° 1 in Europe and one of the worldwide leading manufacturers
The HAULOTTE telescopic booms offer :
- from 14 to 43 m working height
- a maximum platform capacity (up to 360 kg)
- an important outreach (up to 20m)
|
|
STANDARD FEATURES :
• Axle based drive system
• “Detroit Locker” type rear differential and
limited slip front differential
• Diesel engine
• Directional sensing drive and steer control
• Proportional controls
• Drivable at full height
• 8ft. platform with modular railings
• Swing up cowlings for easy access
• Swing out engine tray
• 12V DC auxiliary power
• 360° continuous turret rotation
• Dual wet disc — SAHR brakes
• 12 x 16.5 Grip lug air-filled tires
• Tie down/lifting lugs
• Hourmeter
• Operator horn
• Base controls
• Spring hinged gate full height gate, side entry
• Comprehensive operating, parts and
maintenance manuals
• All motion alarm
• 45% gradeability
• Oscillating axle
• Relay based control system
• Color coded and numbered wiring system
|
|
|
|
Elevator access platforms
