|
|
The New Telescopic Platform H28 TJ+ (HB86 TJ )
Haulotte Group, the global manufacturer specializing in equipment that lifts people and material lifting equipment, has used its expertise to respond to customer needs with the launch of the innovative Telescopic Big Boom H28 TJ (HB86 TJ )
Innovation
Additional %u2018flexibility%u2019
The new Big Boom H28 TJ (HB86 TJ ) has a telescopic jib which offers a 5 m additional reach (16 ft 5 in) to work in the most challenging working environments
%uF0D8A significant increase in productivity
In every respect, the new big boom H28 TJ (HB86TJ ) makes your work easier and allows you to operate in a wider range of working environments
With an outreach of 23 m (75 ft 6 in)
With simultaneous movements
With an 2.44 m platform (8 ft)
With the capacity to lift rapidly heavy loads (Up to 350 kg %u2013 772 lb).
With a 5 m (16 ft 5 in) telescopic jib with proportional controls that allows to reach the most inaccessible worksites.
|
|
New Tracked Aerial Platform LightLift 23.12
Heigth 23 metres
Outreach 12 metres
Weight: just 3000 kg!
Max. Capacity: 200 kg !
Automatic stabilization
Wide display on the new remote controll
Two travel speeds
Reduced maintenance thanks to the pins free of greasing
Troubleshooting over the web to offer all users real-time support
|
|
|
|
|
|
BATTERY-POWERED TRACKED AERIAL PLATFORM GOLDLIFT 14.70
Hinowa realized the first battery-powered tracked aerial platform world wide.
The battery-technologies have been applied to the GOLDLIFT 14.70.
- Main characteristic : instead of a thermic engine it is fitted with an electric engine at 48V with alternate current of 2000 Watt, supplied by a battery pack.
- Battery pack: lithium technology realizing the first aerial platform world wide with lithium-ion batteries.
Advantages of the lithium-ion technology compared with classic lead acid batteries usually used for construction machinery:
• Weight reduction: maintaining the same performances, the weight of these batteries is just about 1/3 of the traditional ones.
• No memory effect: this means that it is possible to recharge the batteries as much as one likes without running the risk of damages if the batteries are not completely empty when charging.
• Average life of batteries about three times longer than traditional batteries.
• Recharging time about the half of the time needed for recharging traditional lead acid batteries.
Furthermore there is a battery charger on board and thanks to this it is possible to recharge the batteries if it is necessary and to continue working with the aerial platform while the batteries are charging.
Another benefit of the new battery-powered tracked aerial platform is the complete elimination of any acoustic emissions and exhaust gases protecting in this way the environment and the operator’s health preserving the well-known performances which have been decisive for the success of the Hinowa spiders.
|
|
TRACKED AERIAL PLATFORM LIGHTLIFT 14.72
A perfect platform: though not exceeding 1350 kg in weight, it offers first class characteristics and performance.
1) Operating height: 14 m
2) Operating outreach: 7 m
3) Load selector: 120÷200 kg
4) Remote control
5) Engine and electric motor
6) Electronic level that ensures perfect levelling, thus increasing the operator’s safety.
7) Manufactured with high resistance steels that guarantee sturdiness as well as lightness. Covered by two HINOWA patents.
A) Load cell that slides vertically on recirculating ball bearings, in such a way as to eliminate any friction and ensure perfect load control, thus increasing the operator’s safety.
B) 360° swing mechanism.
|
|
|
Steady and reliable platform Proportional controls Easy towing speed rate A unique design of the stabilizer’s system allowing its use on rough grounds
|
|
When you need a lift but don’t have a flatbed, our Tow-Pro™ Series is for you. All you need is a trailer hitch and you can take the lift where you need to work. It’s easy to transport and the hydraulic auto-leveling outriggers give you fast and easy set up. Whether you need it for tree trimming, decorating, construction, lighting, or repairs, a Tow-Pro is great for your everyday needs
T350
Features
- Gasoline engine or 24V DC electric power
- Standard air and water lines to platform
- Accessory Mounting Tray accommodates your generator, air compressor or pressure washer
T500J
Features
- Gasoline engine or 24V DC electric power
- Standard air and water lines to platform
- Accessory Mounting Tray accommodates your generator, air compressor or pressure washer
|
|
TRAILER MOUNTED Z-BOOM
Genie® trailer-mounted Z™ -booms feature outstanding operating envelope, making them your best value to reach jobs high and low. Both Genie® TZ™-34/20 and the TZ™-50 feature the exclusive Genie® Automatic Levelling System™ for self-levelling on any terrain, resulting in a faster setup that gets the job started - and finished - quicker. With
easy-to-tow mobility and simple pictograph controls, it's no wonder that Genie® trailer-mounted Z™-booms take productivity to new heights.
Versatile Genie® trailer-mounted Z™-booms offer an outstanding operating envelope with working heights of 12.36 to 17.08m and superior outreach of 5.59 to 8.89m.
|
|
|
|
|
|
The new aerial platform ORCHIDEA LIFT 21.11 is in the forefront of aerial platforms with innovative and advantageous solutions created by Hinowa over many years of construction of aerial platforms in particular of LL23.12.
1) Hydraulic variable stabilization.
2) Automatic stabilization on inclinations up to 5°.
3) GO HOME Function
3) “In shape” rotation with anti-collision control between the structure, the chassis, the cabin and the outriggers.
4) JIB arm
5) Basket rotation.
6) Interactive display that provides the operator useful information during operation in order to avoid machine stops due to user errors.
7) Visibility of the machine on the web R.A.H.M. that through a satellite system allows the location of the machine worldwide and to verify the state and regularity of use.
8) Lubrication-free pins.
9) Acceleration and deceleration control on all the movements that makes the plaftorm extremely manageable.
10) Double pantograph lifting system which assures a vertical movement of the basket up to 11 metres working height.
11) Electric engine 220 volt.
12 Top class performances: 21 m. working height with 11 m. outreach
200 fixed capacity.
|
|
Max working height approx. : 13,00 m
Max platform height approx. : 11,00 m
Max working outreach approx :6,50 m
Turret rotation :360°
Max cage dimensions :0,85x0,70x1,10 m
Safe working load on cage :120 kg
Vehicle : Nissan 35.11/35.13 (2900 mm)
Stabilizers : without outriggers
|
|
Max working height approx. : 18,20 m
Max platform height approx. : 16,20 m
Max working outreach approx (with 200 kg on cage) : 9,80 m
Max working outreach approx (with 80 kg on cage) : 12,90 m
Turret rotation : 360°
Boom telescopic amplitude : 8,02 m
Max cage dimensions : 1,60x0,70x1,10 m
Safe working load on cage : 200 kg
Maximum admissible slope :1°
Stabilizers : pantograph front stabilizers and box type rear stabilizers
|
|
Max working height : 28,00 m
Maximum platform height : 26,20 m
Maximum working outreach : 18,00 m (*)
Turret rotation (continuous) : 360°
Boom telescopic amplitude : 14,10 m
Rotation angle of the second boom : 300°
Basket dimensions : 2,0x0,80x1,10 m
Safe working load on cage :250 kg
Maximum admissible slope :0°
Basket rotation :90° + 90°
Stabilizers EF: laterally extensible hydraulic stabilizers
|
|
Max working height approx. : 20,00 m
Max platform height approx. : 18,00 m
Max working outreach approx : 9,65 m
Turret rotation :360°
Boom telescopic amplitude : 3,88 + 4,44 m
Max cage dimensions : 1,40x0,70x1,10 m
Safe working load on cage : 200 kg
Stabilizers :Straight line front stabilizers and pantograph rear stabilizers (Nissan - Renault Maxity)
4 pantograph stabilizers (Iveco)
|
|
Max working height approx : 14,70 m
Max platform height approx :12,70 m
Max working outreach approx (with 200 kg on cage) : 6,20 m
Max working outreach approx (with 80 kg on cage) : 7,70 m
Turret rotation : 360°
Boom telescopic amplitude : 5,75 m
Max cage dimensions :1,20x0,70x1,10 m
Safe working load on cage :200 kg
Stabilizers : 4 straight line stabilizers
|
|
Maximum working height :52,00 m
Maximum platform height :50,20 m
Maximum working outreach : 27,80 m (*)
Turret rotation (continuous) : 360°
Boom telescopic amplitude :28,91 m
Rotation angle of the second boom :300°
Basket dimensions : 2,50/3,60x0,90x1,10 m
Safe working load on cage :300/365 kg
Maximum basket rotation :90° + 90°
Stabilizers : Laterally extensible hydraulic stabilizers
|
|
Maximum working height :65,00 m
Maximum platform height : 63,20 m
Maximum working outreach : 33,00* (200 kg) - 30,00* (400 kg)
Turret rotation (continuous) : 360°
Boom telescopic amplitude :37,55 m
Rotation angle of the second boom : 300°
Rotation angle of the final element 270°
Basket dimensions : 2,50/3,60x0,90x1,10 m
Safe working load on cage : 200/400 kg
Maximum basket rotation : 360°
Stabilizers : Laterally extensible hydraulic stabilizers
|
|
|
Designed to fulfill your needs, FRACO’S FRSM-8000 Hydraulic Mast-Climbing Work Platform is a surprisingly powerful and efficient tool for all contractors who want to lower their costs and become more productive and profitable. Increase your earning power by 30-40%!
|
|
|
FRACO’S FRSM-3000 Hydraulic Mast-Climbing Work Platform is a surprisingly powerful and efficient tool for all contractors who want to lower their costs and become more productive and profitable. Increase your earning power by 30-40% with this towable self-contained platform! Each unit can carry up to 1,360 kg (3,000 lbs.) of LIVE load! Highly flexible on its freestanding trailer, the 3000 is perfectly designed for working heights of up to 11 m (35 ft) without being anchored to the wall.
|
|
Mast climbing work platform are a handy and efficient alternative to traditional scaffoldings.
Suitable for:
- Facade maintenance and repair
- Bricklaying
- Facade insulation
- Window installation
- Facade refurbishment, plastering and painting
- Ship building and restoration
- Roof restoration
- Industrial plants
- Demolitions
|
|
|
|
|
|
Twin mast climbing work platforms
As leader in the production of mast climbing platforms, today SAFI has a range of products which covers from the smallest single mast climbing work platform for small restoration work with the "JOLLY JUNIOR" to large twin mast climbing work platforms for heavier constructions work like the "VISION 4000", for working surfaces over 100m high and 35m long.
The strong point of all the models is the modular composition, both height-wise and lengthwise, which means enormous saving on construction site costs.
There are many versions for all types of machines : single mast, twin mast , wheel mounted for road or construction site use and special versions.
All models had the ministerial authorizations before the machine directive of 1997 and several international certificates such as the German TUV GS , the French ATS, the Italian OCE.
After the introduction of new regulations in the European Community all equipments were conformed to the safety standards and obtained the European certification from Italian and International boards with the related CE mark.
|
|
Service platforms
AMV Service Platforms are supplied in many configurations. The most popular version is the AMV 10,5. This unit is built on a lorry chassis, it has a maximum working height of the platform floor of 10,5 m. and a lifting capacity of 1500 kg. over the whole working range. It is equipped with four hydraulic support legs. The standard version has a p.t.o. driven hydraulic pump. An electric powerpack can be supplied as an option. Other options are diesel driven compressors and generators for tool operation. All operations are radio operated.
|
|
GIA Utility/Service Truck. Three models are manufactured today i.e. GIA 111 and GIA 211 which is articulated trucks and GIA TT 24 which is a rigid truck. All three models are 4-wheel driven in order to be able to operate in steep inclinations.
The models can be equipped with e.g. boom and basket, scissors platform for ANFO charging, scaling, different kinds of installations and service works. The trucks can also be used as e.g. small dump truck or shotcreting rig. A combination of several equipments on cassettes makes one truck useful in many different applications.
The main feature with GIA Utility/Service Truck is:
• High productivity
• High safety
• Low investment and service cost
• Well known components
|
|
|
|
|
|
Utilift scissors lifts on our famous mining carrier are designed for lifting and installations in mining and low-profile tunnelling. Utilifts are suitable for roof reinforcement work, charging explosives, hanging cables and installing pipes, ventilation equipment, etc. Typical standard options include a side-shift platform, platform tilt, crane, pipe changing equipment, air compressors, an electric-driven power pack for platform hydraulics, ANFO charging kits and helper platforms. The vehicle’s driving ergonomics can be enhanced with an optional, fully enclosed, high-comfort operator’s cab.
Himecs are the product of long-term collaboration between Normet engineers and global tunnelling customers and experts. This has generated a holistic understanding of customers’ lifting and access equipment needs in both hard and soft rock environments. The wide range of Himecs is ideal for medium to heavy-duty load lifting and work coverage in practically any tunnel profile. With a large variety of platform configurations and standard options, they can be perfectly customized for specific lifting applications. Our new platform load sensing system and other built-in man-lifting safety features comply with the latest safety rules and regulations. Himecs are also CE-approved and feature the famous Normet mining carrier.
|
|
P1 SLP5000N Features
Heavy-duty scissor mechanism and deck provide a stable elevated mobile work platform.
Compact 6-foot (1,83 m ) wide articulated carrier with 16'-1" (5.13 meter) outside turning radius is extremely well suited for very narrow drifts and confined areas.
Pipe handler system facilitates installation of pipes and ducts.
Four totally enclosed stabilizers with built-in hydraulic safety locks for leveling machine and higher reach.
5 000 lb or 2 268 kg safe lift capacity.
Proven powertrain with integrated torque converter and three gears in forward and reverse.
Four-wheel totally enclosed wet multi-disc brakes with POSI-STOP feature for emergency/parking.
Articulated heavy-duty frames made to withstand the high impact and torsional stress associated with mining application, frames come with a five-year unlimited guarantee. Large high tensile alloy steel pins located in replaceable anchor bushings
|
|
P1 SL6000 Features
Heavy-duty scissor mechanism and deck provide a stable elevated mobile work platform.
Four totally enclosed stabilizers with built-in hydraulic safety locks for leveling machine and higher reach.
6 000 lb or 2 720 kg safe lift capacity.
Proven powertrain with integrated torque converter and three gears in forward and reverse.
Four-wheel totally enclosed wet multi-disc brakes with POSI-STOP feature for emergency/parking.
Articulated heavy-duty frames made to withstand the high impact and torsional stress associated with mining application, frames come with a five-year unlimited guarantee. Large high tensile alloy steel pins located in replaceable anchor bushings
|
|
Diesel-powered elevated work platform for safer, more productive overhead maintenance and construction
A-64 scissor lift general features:
* Large, solid, safe elevated work platform for roof-bolting, screening, surveying, cable and vent or water pipe hanging and many other back and rib projects.
* Fully sealed electrical circuits maintain circuit continuity, extend component life and minimize downtime.
* Computer-designed scissor mechanism satisfies structural design standards recognized throughout the world.
* Numerous configurations available for a variety of applications, including a portable palletized ANFO charging system, to meet your specific needs.
|
|
SL-3 Scissor Lift
Designed to provide a safe work platform for installation of services in tunnel headings up to twenty feet (six meters) high. The Mine-Mate™SL-3 Scissor Lift is fully equipped as standard for the multi-tasking required in today’s underground trackless mining environment.
|
|
|
|
|
|
Utilift scissors lifts on our famous mining carrier are designed for lifting and installations in mining and low-profile tunnelling. Utilifts are suitable for roof reinforcement work, charging explosives, hanging cables and installing pipes, ventilation equipment, etc. Typical standard options include a side-shift platform, platform tilt, crane, pipe changing equipment, air compressors, an electric-driven power pack for platform hydraulics, ANFO charging kits and helper platforms. The vehicle’s driving ergonomics can be enhanced with an optional, fully enclosed, high-comfort operator’s cab.
Himecs are the product of long-term collaboration between Normet engineers and global tunnelling customers and experts. This has generated a holistic understanding of customers’ lifting and access equipment needs in both hard and soft rock environments. The wide range of Himecs is ideal for medium to heavy-duty load lifting and work coverage in practically any tunnel profile. With a large variety of platform configurations and standard options, they can be perfectly customized for specific lifting applications. Our new platform load sensing system and other built-in man-lifting safety features comply with the latest safety rules and regulations. Himecs are also CE-approved and feature the famous Normet mining carrier.
|
|
The RDH All Purpose Scissor Lifts have been designed to exceed the most stringent engineering criteria. With RDH’s solid steel arms we are able to offer a level of safety and durability that has yet to be matched.
The RDH 500N, 500R & 600R are built on the RDH carrier which offers a four wheel drive fully articulated power shift vehicle. The units offer excellent maneuverability with superior handling and good visibility from the cab position. They have been designed with the same criteria as our larger series. These Scissor Lifts make mining safe, productive and cost effective. The complete line of RDH Scissor Lifts can be custom built in order to meet individual requirements.
|
|
The HAULOTTE vertical masts offer :
- from 6 to 12 m working height
- maximum compactness and handiness
- a high autonomy (powerful batteries)
|
|
|
JLG’s vertical personnel lifts are the smallest aerial work platforms in the entire range. Provided to meet the needs of applications where space is limited and the floor load is restricted. The lifts are designed to have a minimum footprint area and can be set up quickly so there is little delay for you to start on the task ahead. The personnel lifts consist of a work platform attached to an aluminum mast that extends vertically. Platforms vary in size and capacity but all carry one person (some models carry two) with optional attachments to carry tools and materials with ease. There are three types of vertical personnel lifts available: push around vertical lifts, self-propelled vertical lifts, and self-propelled stock picker vertical lifts.
|
|
|
|
Elevator access platforms
