|
|
Pneumatic manipulating model Standard with tool of taken to magnet
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of a manipulating to snodati rigid arms equipped of vertical movement of raising to double rope. The solution can be used for the movimentazione of all those products that can be raised through a magnet (in the event illustrated windings).
The product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is mounted on a fixed column but it can be had also in the configurations to column, on autostabile base, hanging and flowing (also with system to bridge-laying tank).
Capacity 200 kg
Range 2500
|
|
|
|
|
|
Loader seeds automatic rifle for sticks of paper for the line of feeding of a rotating one of press.
Semi-automatic loader for sticks of paper FOR the line of feeding of a rotating one of press.
It is equipped of a system of taken to pneumatic clamp opportunely sagomata and determine the proportions, joined to a balancing system automatic rifle of the cargo installed on an articulate arm or the flowing ways of race to carroponte.
It is used with nature acting on the commando console who is studied in order to guarantee ergonomics and operating rapidity; 4 sticks are loaded medium with paper to the minute.
The taken clamp of is constituted from two thin ganasce sagomate flowing ones for the taken one on the short side of the packages of paper; the wide faying surface of the ganasce avoids that the ream of paper is damaged on the flanks for effect of the serration force.
The commando console is Friendly, with prati push-buttons to us of dual-control for the drive of the clamp avoiding crushings or traumi to the limbs.
The balancing body of the machine works to compressed air 7 bars (0,7 mPa), is of highest reliability and duration in the time.
It can be installed in three various configurations:
on a double mounted articulate arm on a fixed column
on a double mounted articulate arm on a fixed column to a autostabile platform
on aerial flowing track on axis X or to carroponte on the aces X and Y.
It works to single compressed air, is marchiato CE and it is not subject to the safety controls of the raising systems.
|
|
Pneumatic rope balancers for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 75 kg
Max work radius 3 m
Rotation 360°
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
|
With Stanley’s new iTrolley for enclosed and patented track rail systems, moving loads with large unwieldy bridge cranes is now possible with greater speed and precision than ever before. The system masks the momentum and inertia of the overhead crane, greatly reducing the starting-and-stopping strain that causes most operators to abandon the equipment and perform the task manually.
|
|
Pneumatic rope balancer with special double fork handling attachment, with adjustable width, provided with mechanical locking of the handled part. Properly designed to handle metallic and/or plastic boxes and cases.
Available also in version with rotating device for the emptying of the contents.
Max capacity 80 kg.
|
|
Pneumatic rope balancer with pneumatically operated permanent magnet handling attachment. Particularly indicated for handling of steel part having both flat or round surface. Safety device allowing the automatic connection of the load balancing function only if the part is gripped.
Max capacity 80 kg.
Also suitable in execution for manipulator with capacities up to 250 kg or more, to be used also with tilting or turning devices.
|
|
The Cartesian manipulator makes it possible to handle loads going of 0 with 320Kg while optimizing the operating areas available, in perfect ergonomics for the men and the material. Able to cover great zones, it is available in electropneumatic or pneumatic version
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
-Bags.
-Car Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Specific hand of gripping on request
Turnkey installation.
|
|
Lifting technology
Handy chain model
• cost effective transport
• fast change of suspension attachments
• fast handling of goods up to 250 kg
• for handling with one hand only
|
|
manipulator with cable :
The manipulator with cable makes it possible to handle loads going from 0 to 900 kg while optimizing the operating areas available, in perfect ergonomics and for the men and the material.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Specific hand of gripping on request.
Turnkey installation.
|
|
When spreads are short or production is limited, spreaders are the right solution for cost-effective and efficient spreading with accurate edge control.
Eastman offers both automatic and manually-operated spreading systems. Please contact the factory to determine the best equipment for your application.
|
|
To spread alone one or some sheets of fabrics.
* Unwinder equipped with free rools
* Pneumatic clamping device on the whole width
* Manual carriage translation on the table top
* Pneumatic clamp above the cutting rail
* Automatic cutting sqare device
* Complete cutting table with guiding rails
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
Handling large drum loads safely is no longer a problem: Our drum tongs, grippers, lifters and tilters allow both vertical and horizontal transport.
Even where space is restricted, the storage area can be flexibly loaded. Stable constructions and galvanized models ensure a long product life, which is guaranteed through our manufacturing competence.
|
|
|
The configuration choice gives you the possibility to adapt each solution to your specific mavimentation exigencies, depending also on the paricular working cycle.
|
|
Handling attachment with circular or properly shaped vacuum pad. Indicated for handling of metal or plastic barrels.
Vacuum generation by electric vane pump or pneumatic ejector (Venturi system).
Max capacity 35 kg.
Ergonomic handle.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
|
Fast die change with the ROLLBLOC changeable sub plate technology opens up new opportunities to make small batches – even short-term orders from customers in a hurry – economically viable.
|
|
Pneumatic arm manipulator with multi pads handling attachment for handling of big window panes, panels or sheets. The handling attachment is equipped wit one pneumatic motor gear reducer 180° and with one pneumatic tilting device 90° to allow the operator to orientate the window panes without effort.
Particularly indicated to feed or unload sealing machines, washing machines and sandblasting machines for window panes.
Max capacity 250 kg.
Max work radius 3.7 m.
|
|
|
|
|
|
The Ace Dolly from Wood's Powr-Grip® features a unique mast design
with manually operated vacuum cups, to lift and transport glass
without the need for external power, cranes or high ceilings.
Standard Vacuum Pad Spread:
12" x 61-1/4" [305 x 1556 mm]
Number / Size of Vacuum Pads:
3 / 11" [280 mm] dia. lipped vacuum pads
Overall Dimensions:
30-1/4" [767 mm] wide x 95-1/2" [2426 mm] long
Mast Height:
119-1/2" [3034 mm]
Mast Tilt:
Up to 27" [686 mm] outward from vertical position
Load Capacity:
450 lbs [205 kg]
Unit Weight:
395 lbs [180 kg] (Does not include ballast.)
Standard Features:
Toe-kick floor locks
Auto-brake winch
Special high-capacity Wood's Powr-Grip Vacuum Cups
Smooth gliding rubber rollers
Automatic mast lock
Tilt damper
The Ace Dolly eliminates the need for external power, overhead cranes and high ceilings. Capable of handling glass sizes to 130" x 144" [3302 x 3658 mm], it efficiently lifts and carries large glass where other glass transport systems can't. The versatile design permits glass transfers from either the face or the end of storage racks and cases. A unique mast design features manually operated vacuum cups that grip glass and hold it securely for transport. Smooth gliding rubber rollers support glass weight and ease movement when loading from the end. The manually operated auto-brake winch locks and releases in any position. In use for more than 20 years, the Ace Dolly makes lifting large lites a quick and efficient one-person job.
|
|
At last a truly complete modular system for realising grips
for robots used in plastics moulding processes.
Our system, developed in collaboration with leading
robot manufacturers, lets you quickly realise exactly the
right type of grip choosing from a wide range of ready-to-use solutions.
Production will never be slowed down again by not having the right grip for the job!
All components fit together simply without the need for special tools, and can be used over and over again.
|
|
These gripping rails are excellent for holding non-ferrous material on a magnetic chuck. Grinding stainless steel, brass and plastic, while maintaining parallelism, is easy with these new gripping rails from Mitee-Bite.
Incredible parallelism can be achieved because of the down force generated by the Pitbull® Clamp.
Improves holding force on ferrous material for quicker stock material.
Additional strips of steel placed behind the gripping rails will allow increasing the clamping pressure.
Larger size parts can be held by using multiple rails. Parts can be pushed against the solid rail with one or more of the gripping rails.
|
|
Rational handling equipment for all sectors of sheet and flat glass processing.
Bystronic Armatec handling equipment characteristic features:
- careful handling of load
- ergonomics and safety
- minimized effort for the operator
- time saving and cost reduction in manufacturing
process
|
|
AO Series Air/Oil Hydraulic Manipulators
For effortless lifting and unobstructed reach, AO Series manipulators provide strong lifting and positioning power in compact, easy-to-operate units. Running quietly and trouble-free on shop air and a self-contained oil supply, AO Series manipulators are provided with low and high points of the lift stroke determined by your specific application requirements. Its non-electric operation is ideal for C1D1 areas.
Manually-guided articulating arms are available with radial reaches up to 96 inches. The unique linkage design allows smooth, continuous movement throughout the work area. Horizontal movement is not restricted by vertical supports, cabling, or vacuum hoses. This permits the arm to maintain the attitude of the load for reach-in or reach-under applications.
|
|
TAWILift is a versatile and effective tool that opens up opportunities for fast, convenient and safe handling of loads. It relieves operators of strenuous manual operations such as gripping, lifting, holding and turning objects. TAWILift can be equipped with a wide variety of tools.The actual design of the tool is dependent on the specific application. Typical tools include lifting hooks, lifting tongs, magnetic and suction tools and hydraulic grippers.
Lifting steel parts
The TAWILift in the picture is a hydraulic, modular gripping unit for goods weighing up to 500 kg. The gripper is available in several versions. The jaws can easily be modified to suit the handled object. The drive unit consists of a quiet hydraulic system powered by a 3-phase motor.
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
Transfercapacity: max. 250 Kg
Z-axis travel: low pos: 200 mm / high pos: 1860 mm
X-axis range: 1300 mm
Please note: Grippers for different EROWA tooling to be ordered seperatly.
Manipulator to be installed in front of a machining center where frequent changes of pallets are called for. Possible adaptions for all EROWA Tooling.
Gripper Order Numbers
ER-030192 Gripper ITS 148
ER-030194 Gripper ITS 148 swivelable
ER-030218 Gripper FrameSet
ER-033290 Gripper RCS swivelable
ER-042568 Gripper fork MTS 400
ER-044612 GripperFrameSet/RCS
ER-046144 Gripper RoboSet
ER-046160 Gripper RCS 1
ER-046161 Gripper RCS 2
ER-046162 Gripper RCS 5
ER-046163 Gripper fork UPC
ER-046164 Gripper fork UPC/RCS
ER-047400 Gripper RN PC 210
|
|
Pneumatic arm manipulators for handling, “weightless”, which allows the minimum effort for the operator, when using handling attachment for glasses, metal plates or panels.
Max capacity 600 kg
Max work radius 3.7 m
Max vertical storke 2.4 m
On customer request manual or pneumatic rotating or tilting devices can be supplied.
|
|
|
The SPARK manipulator takes the feedhead from the mould and fully separates it from the moulded pieces in addition to significant time saving, this also permit immediate recycling of thematerial, and prevents the feehead from falling into and remaining in the mould. Incidence on moulding cycle time is negligible due to the manipulator’ s high operating speed.
|
|
Stanley’s iLift ™ , the most advanced lifting and balancing system available, allows operators to manipulate loads with greater speed and precision than ever before. By simply grasping the slide handle or the load itself and gently applying force in the desired direction, the operator can manipulate payloads as if they weighed ounces.
Operators can meet productivity goals while reducing ergonomic strain, with programmable virtual limits, user-selectable operating profiles, and vertical speeds up to 4.9 ft/sec. Offering a blend of power assist and hands-on (“float mode”) load positioning, the iLift combines computerized control with human manipulation.
|
|
|
|
Manipulators, Manipulation arms
