|
|
UM Series Underhung-Overhead Manipulators
Unidex manipulators provide versatile solutions when mounted overhead. One machine can do the work of many by taking advantage of the X and Y axis movement offered by bridge cranes. Unidex works with various crane manufacturers and is an authorized dealer of several brands, enabling us to supply the ideal combination crane-manipulator for your needs.
The unique design of Unidex UM Series manipulators offers reach-in flexibility for machine loading and unloading, plus the capability for stabilizing out-of-balance loads that cannot be handled as well by a swinging or dangling hoist.
UM Series manipulators have a wide range of applications including the handling of castings, parts or tooling, and stacking and reaching into restricted areas such as ovens, parts washers, racks, presses, and other equipment.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
The ATISacer manipulators, endowed with a rope guided vertical movement unit, allows the handling of loads in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific needs. They are equipped with movement units, necessary to the movement cycle, which can be manual or by means of pneumatic components.
The rope-guided ATISacer manipulators are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, overhead or sliding on overhead runway tracks.
The implant which regulates the functioning of the manipulator is powered only by the air in the network.
|
|
|
|
|
|
Brief description
The most advanced cable balancer is the Flexi-heffer. Useful for applications where loads can be lifted using a cable and/or can be handled flexibly or free-suspended. Ideal especially to the highly desirable added value generated by its user-friendliness and ergonomics. (For technical specifications: see table below)
Unique principle: ergonomic thanks to idle flexible arms
There is no other handling system with the same major advantage in day-to-day use as the BPL Flexi-heffer. What is unique are the idle flexible arms e.g there is no hoist drive inside or attached to the arms. The arms that carry the load are moved by the operator from ‘A’ to ‘B’. Movements, in particular horizontal, are extremely light because of the idle and flexible arms and the hoist drive which is mounted in the static column. Summarized the technology is sophisticated and yet surprisingly simple.
Speed and self-balancing: the second advantage
The idle arms allow easy manual movements in horizontal directions. Vertical movements are also very quickly. The Flexi-heffer is available for many years with the BPL control unit for self-balancing. This means that a series of different loads can be handled successively without the need for any weight adjustments. At the same time the vertical movements can be operated with the touch of a finger with acceleration and deceleration.
|
|
Dalmec offers a range of tooling heads for the “weightless” handling of containers.Simple to use, they allow the operator to move the containers quickly, accurately and safely throughout the working area.
These manipulators have been custom-built, with specially adapted design, dimensions and picking systems to suit the specific requirements of the users and the various environmental conditions available.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Pivot arm KSL-L/-M
Pivot arms type KSL-medium and KSL-light are combined with Demag rope balancers or Demag SpeedHoists which are fitted above the pillar. Therefore, they offer the operator highly convenient, smooth and flexible load handling, as only the relatively low dead weight of the arm has to be moved.
They are available with load capacities of up to 160 kg and, depending on the design, an outreach of up to 5,000 mm.
|
|
The Freestanding Easy Arm™ requires no special foundation for installation and puts no stress on your building's overhead structure. This all-in-one design is more cost effective for moving loads within one work cell than adding a work station bridge crane.
- Easy to install and relocate: Its simple 4-bolt pattern makes it easy to install on any 6" reinforced concrete floor
- Easy to move: The lifting mechanisms are located over the primary pivot point, making the arm lightweight
|
|
Vacuum lifting with an INDEVA means more productivity, more ergonomics, more safety!! Specialists in vacuum lifting since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Dalmec has produced many Industrial Manipulators used in the building sector for the handling of paving tiles - sanitaries - cement products - isolating materials etc.
The photo illustrates a Manipulator Partner type, column munted version, with a base-plate for forklift truck.
|
|
Dalmec has produced hundreds of Manipulators now in use in the best industries throughout the world for the handling of cheeses - hams - pasta packages - bottles and/or their packing - carton boxes - containers - tanks - bags etc.
The photo illustrates a Manipulator Partner type, column mounted version, with a base-plate for forklift truck allowing a rapid movement to many different workplaces. The Manipulator is equipped with a suction cup for the gripping of cheeses having different dimensions and weights; the vacuum is generated by a “Venturi” ejector.
|
|
Dalmec offer a wide range of manipulators, fitted with custom-built tooling for the “weightless” handling of foundry products.
Simple to use, they allow the operator to move products quickly, accurately and safely within the operating area.
The type, design, dimensions and picking systems incorporated in these manipulators are tailored to suit the specific requirements of the user and the varying environmental conditions available.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Vacuum lifting with an INDEVA means more productivity, more ergonomics, mre safety.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Pneumatic arm manipulator with vacuum pads handling attachment for mini pools, equipped with pneumatic moto reducer for rotation.
Max capacity 280 kg.
Work radius up to 3,7 m.
|
|
Pneumatic arm manipulator with handling attachment for single tubes or tubes assembly.
180° rotating device by pneumatic motor.
Max capacity 280 kg.
Max work radius 3.7 m.
Max vertical stroke up to 2100 mm.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Vacuum lifting with an INDEVA means more productivity, more ergonomics, more safety! Specialists in vacuum lifting and material handling solutions since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Handling attachment for natural rubber. Indicated for the movement of parts having a very rough surface.
Vacuum generation by electric vane pump.
Max capacity 140 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Pneumatic arm manipulator with pneumatic gripping tool for cloth, paper or plastic rolls.
180° rotating device by pneumatic motor.
Max capacity 280 kg.
Max work radius 3.7 m.
Max vertical stroke up to 2100 mm.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
|
FAMATEC STANDARD gives you the reliability of the solution tested and tuned in many other solutions supplied on similar requests. FAMATEC Standard is characterized by short delivery terms and a precise definition of the technical points since the first steps of the offer.
|
|
The Glass PANTO'LECQ manipulator
PANTO'LECQ allows to handle a rang of glass from 0 to 500 kg while optimizing available work areas.
|
|
Pneumatic arm manipulator with vacuum pads handling attachment, with 4 x 90° manual rotation, equipped with inclination adaptor for unloading of sealing machines
Max capacity 280 kg.
Work radius up to 3,7 m.
|
|
HIRSCHMANN handling units EROBOT and Robot-Cells for automatic loading of machines with workpieces and tools.
HIRSCHMANN EROBOT handling units ensure both longer running times for machines, and, less hands on for operators, thereby considerably increasing machine efficiency.
Features:
up to 500 magazine positions
up to 130 kg transfer weigh
Optimally adapted to each machining center
Advantages:
The machine can also be used at night and on the weekend
90% reduction in machine downtime
Optimized machine-hour rates
Increased productivity = more profit
Increased machine runtime
Exploitation of unused potential
|
|
|
|
Manipulators, Manipulation arms
