|
|
| Products 91 to 120 of 170 |
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Manipulator Panto' Lecq Suspended (Pantograph):
In version suspended, PANTO' LECQ makes it possible to handle loads going from 0 to 250 kg while optimizing the operating areas available (useful ray of 3 meters, displacement in X following the definition of the zone to be covered), in perfect ergonomics and for the men and the material.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Specific hand of gripping on request.
Turnkey installation.
|
|
Pneumatic arm manipulators for handling, “weightless”, which allows the minimum effort for the operator. Designed on the principle of the pantograph allows the operator to work inside an area, with rectangular shaped section, defined by the minimum and maximum work radius and the vertical stroke.
Max capacity 250 kg
Max work radius 2,9 m
Vertical stroke 1,98 m
|
|
Material handling equipments, specialist since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
|
Dalmec has designed and manufactured hundreds of manipulators with special toolings for the handling of textile products having different forms, weights and dimensions.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
The great versatility of these manipulators, their ease of use, the presence of tailor made configurations to suit every customer%u2019s special requirements, as well as the complete safety against the free fall of the load make of LiftronicÒ Systems a practical and cost effective material handling solution for a great deal of manual handling applications on assembly, packaging and production lines and in every field of industry.
|
|
FAMATEC FRIENDLY is a “standard” solution for specific applications with common requirements. User-friendlyness, unique design and extreme detail care are the key points of FAMATEC Friendly success.
All the solutions from our brands have as common factors the highest care in details and the will to be recognized as product-leader for the quality of the service offered.
|
|
The most advanced manipulator
A rigid manipulation principle is often desirable for eccentric handling (loads that can be handled centrically are best manipulated using a flexible or self-suspended principle such as a cable balancer). The most advanced possibility in rigid handling systems is the Master Balancer: because, in this case too, the arms are bare and hollow. So that manoeuvrability is much better than with conventional manipulators which have drive elements and sometimes even ballast weights on the arms, which means that everything moves. (For technical specifications: see table below)
|
|
Dalmec offer a wide range of manipulators, designed and manufactured for the “weightless” handling of reels and bobbins.
Simple to use, they allow the operator to move reels quickly, accurately and safely within the operating area.
The type, design, dimensions and picking systems incorporated in these manipulators are tailored to suit the specific requirements of the user and the varying environmental conditions available.
|
|
Pneumatic arm manipulator with pneumatic expander for bobbins.
Thanks to the quick connection of special adaptors, it is possible to handle bobbins with the internal hole from 76 to 200 mm or more.
90° tilting device by pneumatic actuator.
Max capacity 280 kg.
Max work radius 3.7 m.
Max vertical stroke up to 2100 mm.
|
|
The most advanced manipulator
A rigid manipulation principle is often desirable for eccentric handling (loads that can be handled centrically are best manipulated using a flexible or self-suspended principle such as a cable balancer). The most advanced possibility in rigid handling systems is the Master Balancer: because, in this case too, the arms are bare and hollow. So that manoeuvrability is much better than with conventional manipulators which have drive elements and sometimes even ballast weights on the arms, which means that everything moves. (For technical specifications: see table below)
|
|
|
|
|
|
Koike Aronson / Ransome manufactures a complete line of turning rolls which maximize both safety and production with load capacities ranging from 3000 to 2,400,000 pounds.
Offering the widest variety and capacity ranges of turning rolls in the world, Koike Aronson / Ransome always has a fit for your application. Variable speed powered rotation with constant or variable wheel centerline settings are available.
Rubber, Steel, urethane and Micarta (phenolic) wheels are also available. Traditional, Unitized, Self-Adjusting (SA), Tractred, Turbine and Tilting rolls are just some of the models we offer.
Manual or powered mobile sub base cars can be included for quick adjustment of varying vessel lengths. Special engineered Turning Rolls are always available.
MACHINE FEATURES
- For rotating pipes or vessels
- Capacities range from 3,000 lb to 2.4 million pounds
- Rubber, Steel or special composite wheels
- Precise Center Distances
- Heavy Duty Chassis Design
- Overload Discs protect rubber tires on 5,000 lb units & above
|
|
FAMATEC FRIENDLY is a “standard” solution for specific applications with common requirements. User-friendlyness, unique design and extreme detail care are the key points of FAMATEC Friendly success.
All the solutions from our brands have as common factors the highest care in details and the will to be recognized as product-leader for the quality of the service offered.
|
|
Load Rotating Beam
Use of slings ensures no damage to delicate surfaces
Adjustable working width as standard
Self-locking gear keeps even excentric loads in every position
Available for manual or electrical operation
|
|
an Intelligent Assist device for lifting and moving car seats with no efforts. Designed to suit all ergonomics criteria and to comply with all the most recent EU regulations regarding prevention of risk from load handling and prevention of carpal tunnel syndrome.
No production stops due to operator absence for back injury, consistent productivity throughout the day as well as the year. Precise positioning of the seat even in a restricted area thanks to the great sensitivity of the electronic system which respond immediately to the operator force upwards/downwards.
|
|
Liftronic Easy, an INDEVA, a true auto weight sense Balancer! Zero gravity manipulator.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
The G-Force® iQ model offers high speed, precision, and smooth motion, available in a 165, 330, and 660 lb. capacity units.
- Patented exclusive combined collector and air swivel prevents damage to coil and/or optional air coil
- Float mode option for ultimate load control comes with weight readout functionality
- Choice of slide handle or control pendant to best fit your needs
- Add on push button air valves and electric switches for control of end tooling
- Standard Input / Output capability
- Optional expandable auxiliary I/O
- Capable of operating two G-Force® units with one handle or one G-Force® from two different handle locations
|
|
The COL range provides weightless suspension for loads from 0.7 to 55 kg. COL 1 has a 2 mm polyester rope and COL 2, 3, 4 have 2.5 mm stranded steel wire. Every COL balancer is equipped with an automatic braking system. The braking system makes it possible to completely connect or disconnect the spring force to or from the load.
|
|
With cylindrical drum: progressive traction, one balances the load or the tool, one positions his height with the choice, one draws on the load or on the tool to carry out the slackened work, once load or the tool, they return to their initial position.
With conical drum: constant traction on all the race, the load or the tool remain in balance with the desired position.
With pawl: allows to block the rope lathe by lathe or with the wanted position, to free to draw downwards.
Without pawl: the load is balanced or the tool with the position desired, after use the load or the tool takes again its initial position.
|
|
Make tools light as air
Balancers :
- Eliminate strain and fatigue
- Increase productivity
- Streamline work stations
- Applications : assembly lines, packaging units
Cable tool balancers:
- Adjust easily to any tool size and weight
- Secure fastenings
- Rugged aluminium construction
- Long-lasting stainless steel cable
- Various safety systems
|
|
|
|
|
|
- Retractors -
Conductix-Wampfler retractors are designed in such a way that retraction force increases smoothly as the cable is extended. As a result, the attached tool is returned to its starting position by the retractor after use, leaving the workbench free for other tools or equipment. An assurance of precision work is provided by the progressive increase in spring force.
- Balancers -
Conductix-Wampfler balancers can be identified by their conical cable drum, which ensures that the retraction force remains virtually ‘constant’, throughout the full cable travel. As a result, the position is retained after the attached tool has been used. In addition, no noteworthy increase in retraction force occurs when delicate operations are being performed.
- Cable reels -
Conductix-Wampfler Cable reels are mostly used for the supply to electromechanically driven tools in workshops, commerce and industry. The cables are no longer lying around on the floor, the safety level in the company is enhanced, and the operational life of the cables is also increased. In our program you can find cable reels from 2 x 1 mm², with 7 meters take-up length, through 8 x 1.5mm² and 30 meters take-up length, up to reels that are suitable for grounding tank wagons, with 1x16mm² and 15 meters take-up length.
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
|
Koike Aronson / Ransome manufactures a complete line of gear driven welding positioners ranging from 66 to 1,000,000 pounds. Special engineered positioners are always available.
|
|
Suspending your power tool above the work surface with a tool stand and balancer reduces clutter, increase tool and cable life, and improves operator efficiency. Mounting the tool in a torque arm takes the torque reaction force away from the operator's hand.
Tool balancers, used in conjunction with our tool stand or existing overhead support, will keep your screwdriver at the ready, leaving your work area clear when the driver is not in use. These balancers are easy to install and adjust. Choose the appropriate model to suit the weight of your screwdriver.
All models have a maximum travel of 6 ft (1.8 m).
|
|
|
|
Manipulators, Manipulation arms
