|
|
PH - One stage hand pumps
One-stage pumps within the PH-series have a rather simple but very functional design with just a few moving parts. These pumps are real working horses that will last a very long time to come. All PH pumps can be equipped with a pressure gauge in order to have full control about the generated pump force.
PH70-500/LS201 - The pump PH70-500 is also available in a version with a pre-mounted hose of 2 m (LS201ES) including quick coupling AQI7 and swivel coupling ASE10.
*) Gauges and gauge adapters listed here are recommendations only. Gauges and gauge adapters are not part of the pump. Different combinations of gauge and gauge adapter are possible.
|
|
Hand pumps are the most common power source within the area of small and medium sized hydraulic cylinders. Longlife and a outstanding suction properties features this robust and full-metall-construction. Carrying handle and ventilation screw as well as many other details are part of the delivery package.
Features
- Operating pressure max. 700 bar.
- Two stage operation with automatic switch-over (except HPS-1/0.7 A).
- Large reservoir volumes.
- With pressure relief valves, adjustable from the outside.
- Fine adjustable relief valve (handwheel).
- Robust all-steel construction.
- HPH pumps are equipped with a 4-way control valve plus a precision-adjustable relief valve
- Oil port thread: 3/8 NPT.
- Incl. oil filling.
- Pressure gauges with corresponding adaptors are also available as accessories.
|
|
FEATURES:
- O’RING PORT to eliminate leakage.
- DELRIN SEAT to seal between tank inlet and piston reservoir.
- O’RING OUTLET CHECK for zero leakage.
- O’RING SEAL between tank and casting.
- STEEL BALL RELEASE VALVE allows oil to travel to tank and relieves pressure on the outlet line.
- EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting.
- OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation.
SPECIFICATIONS:
Volume Displacement
- HP22SA -- 0.20 in3 (When handle is pulled).
- HP61DA -- 0.60 in3 per full cycle.
- HP121DA -- 1.20 in3 per full cycle.
Tank sizes
- 95 in3, 80 in3, 65 in3 and 50 in3.
- TL -- 2 inch tank used with remote reservoir.
Pressure rating and (Standard relief setting).
- HP22SA -- 6000 psi (4000 psi).
- HP61DA -- 3000 psi (3000 psi).
- HP121DA -- 2000 psi (2000 psi).
Outlet Port Size #6 SAE (9/16-18).
Filler Port Size 1/4" NPT.
|
|
Compact Hydraulic Power Packs USMA 04
Compact hydraulic power packs for the use in lifting
platforms, elevating tables, ramps, presses, machine
tools, mobile applications and others
5 basic hydraulic circuits in the manifold
Possibility of building up an additional circuit in the
form of vertical or horizontal stacking assembly
Tank capacities from 0.4 up to 11.6 US gal
(from 1.5 to 44 L)
Low noise level
|
|
We propose 4 types of hydro-electric power stations to you:
* Small plants for standards:
- tanks of 20,40 or 60 L
- power of drive from 0,37 to 7,5 kw
- extensible by sytèmes of stacking
* Plants for standards:
- tanks from 100 to 800 L
- power of drive from 4 to 75 kw
* Quiet power stations standards:
- tanks from 100 to 1000 L
- power of drive from 7,5 to 90 kw
* Specific power stations:
- conceived and built according to the specifications of the customers
With the power stations and the blocks of distribution, Rexroth ensures the delivery of the complete system.
|
|
|
Eaton offers capacities, control options and configurations to fit virtually any application requirements. Quality Eaton components and high manufacturing standards ensure efficient operation. A wide variety of manifold options and choice of pumps, allows you to match your application requirements with a power unit that meets your system needs, while ensuring cost-effective operation and optimum productivity. Package systems offerings include both standard and custom offerings. Eaton has released thousands of units into operation since 1960 with a proven track record of reliability.
|
|
HYDRAULIC POWER UNITS FOR HYDRAULIC TORQUE WRENCHES
Hydraulic Power Units - Electrically as well as pneumatically driven, single to four ports for operating more than one tool simultaneouly, working pressure 700 bar, light weight and compact design.
|
|
The source of our strength.
Hägglunds power units are the driving force for our motors, which is why they match our motors in quality and performance. With their excellent controllability and fast-acting hydraulic pumps, they bring total reliability to your drive system.
All Hägglunds power units are easily installed, and they can be supplied in a wide range of power levels and configurations. Each is function-tested before delivery, so you can rest assured of their smooth operation.
Customisation is normal, and our economical Spider monitoring and control system is often included in the package.
|
|
Because of the unique integrated fan configuration, the "ready for connection" hydraulic power packs are ideal for continuous operation. Annother version for temperature sensitive applications features an auxiliary blower, thereby gaining improved cooling (approx. 25%). This type is available for single circuit operation (radial piston or gear pump), dual circuit operation (radial piston and/or gear pump) or triple circuit operation (radial piston pump only). Both single and dual circuit pumps are also available as a horizontal version (type HKL).
Complete hydraulic control systems can be created by directly mounting various combinations of connection blocks and valve banks to the hydraulic power pack. These hydraulic power packs are used for machine tools (lathes and milling machines), jigs or general machine applications, making a commonly used external radiator superfluous.
|
|
|
|
|
|
Power units for industrial brakes
The reliable solution for a broad power range ...
Thanks to their compact and robust design HOERBIGER power units offer the optimum solution for a broad power range. Maintenance-free operation with a high life cycle guarantees operational security even in extreme environments.
The use of normally open, leakage-free poppet valves ensures that brakes also close safely if there is a power failure.
In the area of brakes HOERBIGER hydraulic power units from the ranges H300, H400 and H650 are used from the standard range.
The brakes to be actuated are passive safety brakes. This means that the brakes are opened (vented) and kept open against a spring force. For the braking procedure the oil is discharged to the tank via poppet valves. In this way the brake can close by means of spring force. The use of normally open poppet valves ensures that brakes also close safely if there is a power failure. Passive safety valves are used in a variety of areas, e.g. as
- Stop brake and/or retaining brake on chassis,
- Wind energy plants, - Lifts, - Lifting gears, - Slewing gear, - Blowers,
- Turbines, - Saws, - Winding machines etc.
There are different variants depending on application, e.g. hand pump and/or emergency actuation on the poppet valves.
With these options the brake can also be ventilated even during a power failure.
|
|
|
|
|
|
Optimum weight-performance ratio for electric and pneumatic operation
for demanding continuous use
Compact units with remote control via one-hand safety control unit at the
press of a button or with a one-hand permanent automatic control unit.
Convenient continuous operation is guaranteed with this high powered unit.
Efficient and economic tightening and loosening is guaranteed with high flow and
a high operating pressure, with the security of leak-proof hydraulic connections
and the convenience of remote control at the touch of a button.
Special features of LÖSOMAT hydraulic units
- high speed pumps with 2- and 3-stage technique
- oil cooler is standard for high performance units
- continuous pressure torque setting with fine adjustment
- overload safety valve
- oil drain plug
- ventilation ball valve can be closed for transport
- glycerine filled precision manometer (class 1.0), Ø 100 mm
- 400 V units with free choice of motor’s direction of rotation
- safe, electrical remote control with 24 V control voltage
- time controlled, automatic cut-off of the motor
- patented one-hand permanent automatic control
The latest innovations from LÖSOMAT: HRP-865/3AL, HRPU-862ML, HRPU-862AL
Innovative, patented permanently fully automatic without sensor, pressure or time control.
The quickest, simplest and most reliable fully automatic safety control unit on the market for
hydraulic torque wrenches.
The torque standstill signal visible in the remote control offers additional security if it is not
possible to actually see the unit in very loud assembly rooms.
HRPU is a two-stage high-speed unit with a mean pressure level of 0 to 450 bar at 6 l/min and
a respectable 2 l/min up to 800 bar, a novelty among hydraulic units for hydraulic torque wrenches.
Combined with the fully-automatic function, this performance offers an unbeatable bolting speed
during continous operation.
HRPU-862AL is perfect for short screwtightening and loosening times,
it is efficient, quiet, safe and reliable.
HRPU-862AL is a trend-setting investment which always pays off!
Standard accessories:
High pressure hoses with max. operating pressure 800 bar, bursting pressure 3200 bar, which
means 4-times the operating pressure, completed with leak-proof high pressure couplings up
to 1000 bar operating pressure (lockable as an option). Standard lengths: 4m, 6m, 10m.
|
|
Our compact 108 Series power units let you put the power where you need it. They're completely self- contained with an AC or DC motor, gear pump, reser-voir, internal valving, load hold checks and relief valves.
The 108 Series models are designed for intermittent service and come in four standard pump sizes which produce flows of .0098, .0187, .0246, and .0321 cubic inches per revolution. Locking check valves are available in all models. Performance will vary with the type of fluid used. Several hydraulic circuits are available.
108 Series units are available with single-or bidirectional rotation. Single units are commonly used to charge accumulators, power one-direction hydraulic motors and cylinders, provide pilot flow to servo valves, pressurize lube systems and supply multi-function circuits with external valving.
Bi-directional, reversible units operate double-acting cylinders and two-way motors.
|
|
|
|
|
|
HYDRAULIC SYSTEMS - design, production and installation.
Hydraulic systems manufactured by PONAR Wadowice S.A. are characterised by high quality and reliable operation. Our hydraulic systems come both in standard versions presented in the catalogue as well as versions designed upon individual orders, following coordination with the user of the technical parameters and operation conditions.
Hydraulic power units are designed to be used in hydraulic pumps within an open cycle. Depending on operation requirements, they may be produced with a typical or special equipment meeting the user's requirements.
In operation conditions of high operation intensity, power units may be provided with coolers and heaters, while the power unit pump, depending on the order, may be installed in, on, under or beside the tank.
Hydraulic systems we manufacture are widely used in machining tools, presses, metallurgical machinery, mining machines, woodworking industry equipment, construction materials, agriculture, handicraft, etc.
We also provide comprehensive services, from simple cabinets controlling hydraulic feeder pumps to complete control cabinets equipped with PLC controllers including visualisation and archiving of process data.
Upon customer's request we may, on a case-by-case basis, select the type of control and measurement equipment taking into account the existing system solutions. We also carry out modernisations of control systems including integration with the superordinated control systems.
|
|
Serie 550 combines the features and benefits our customers and markets have requested in a durable and economical package.
The integral motor, pump and reservoir are complemented with a full line of Parker NG6 and cartridge valve options. When a linear or rotary actuator is added, a complete hydraulic system solution for your application is obtained.
Serie 165 power units put more power where required. When compared to the successful series 108 units, these new units are more powerful; they are completely selfcontained with a DC motor, gear pump, reservoir, internal valving, load hold checs and relief valves.
Series 165 power units are designed for intermittent duty and are avilable in three standard pump sizes with displacements of 0.52, 0.82 and 1.06 cm³/rev. The units are available for single or bi-directional applivations with a number of hydraulic circuit options similar to those of series 108.
|
|
Completely equipped standard power units
basic power units with directional control valves as per customer's requirements
with gear pumps or radial piston pumps
with 3-phase AC-motor 0.75 up to 7.5 kW - 400 VAC
with programmable control, electric control or terminal box
oil volume of the reservoir 5 to 63 litres
operating pressures 50 up to 500 bar
flow rate 0.82 up to 24 l/min
|
|
For Immediate Release:
Broadview, IL - SIMPLEX introduces the new G-Series High Force Hydraulic Power Pumps to the lineup. The G3 & G5 models were designed with the end user in mind; offering exceptional performance to weight ratios, enhanced power control technologies, precision tuned components for dependability and modular assemblies to manage operating costs.
The G-Series offers higher crossover pressure, which increases productivity at the job site, setting these pumps apart from comparable units. The advanced pump technology maximizes output flow resulting in reduced cycle time. Standard reservoirs include a sight gauge, drain plug and 1" oversized fill hole (1.5-10 gal.) Standard models are available to fit most applications and custom configurations are available from an extensive ordering matrix in our custom build chart.
###
|
|
Twiflex offer several types of electro-hydraulic power units. Careful selection is required since pressure and capacity must be compatible with both the type and number of calipers employed.
The LC range has been designed to provide basic on/off control for a range of Twiflex calipers.
The MP range has been designed to provide an advanced and flexible means of brake control.
|
|
|
Power units are designed and supplied according to each application through close cooperation with Scoda, a specialized sister company
|
|
* HORIZONTAL DESIGN
* 10 - 20 GALLON RESERVOIR
* 1/2- 5 HP ELECTRIC MOTOR
* .90- 5.00 GPM GEAR PUMP
* UP TO 3000 PSI
* 1 STATION DO3 MANIFOLD
|
|
|
|
|
|
●SBH series of hydraulic power unit are mainly applied to the compatible drive for single body SB,SBD series safety brake and for other single function oil cylinders' compatible drive as well.
●YZA series hydraulic power unit are mainly applied to the compatible drive for the double or multi-body SB,SBD series safety brakes and also other single function oil cylinders' compatible drive.
●YZB series hydraulic power unit are used for the compatible drive of YLZ series of wheel brakes and YGZ series of rail brakes' and also other single function oil cylinders.
●YZB□ series hydraulic power unit are used for the compatible drive of YJA,YJD series rail clamp and SBD series safety brake and also others single function oil cylinders.
Main Design Features:
●Major hydraulic components are imported famous brands.
●Main valves with accumulator and pressure relay are leak-proof ball valves and have certain pressure compensation function.
●With Hand pump which can be used as emergency power supply at power off or maintenance.
|
|
|
|
|
|
Oilgear has been providing hydraulic power units (HPU) to the world since 1921. Our power units are supplied to OEM’s for new equipment as well as end users to upgrade or retrofit an existing system. They can be found in almost every application that requires hydraulic power.
A well designed reservoir will be sized and properly baffled to eliminate turbulence, aeration and temperature problems. Oilgear engineers will work with you to define system requirements to determine proper capacity and ensure the unit meets your space and performance specifications.
A complete HPU includes the reservoir, pumps, motors, oil cooling and filtration systems, and necessary valving or manifolds. Pumps can be mounted on the top or side of the reservoir. Vertical and in-tank mounting configurations are also available. Systems can be designed for special fluids or unique environmental conditions.
Large or small, custom or standard, single HPU or multiple system applications Oilgear can provide the hydraulic power unit you can count on to perform reliably for many years to come.
|
|
|
|
|
|
Type ABSKG Modular standard power units:
- Tank capacity 20; 40 and 60 liters
- Tank design: Aluminium tank
- Stable aluminium tank
- Modular design
- Compact power unit design
- Individual adaptation possible
- Versatile use
- Additional options possible
- Clear, maintenance-friendly arrangement
Type ABMAG Modular standard power units:
- Tank capacity 100; 160; 250; 400 and 800 liters
- Tank design: Steel tank to DIN 24339, form AN, cover form C, standard sheet AB 40-40
- Stable steel tank
- Modular design of controls, accumulator kits, cooler kits
- Pump/motor group
- Filter/cooler circulation circuit
- Basic power units with pump power unit, tank accessories (filler and breather filter, oil level indicator, cleaning cover, drain), return line filter, float switch, thermostat
Type ABHSG Power units with high-level tanks:
- Tank capacity 400, 630, 800 and 1000 liters
- Tank design: Steel tank with supports
- Filter: Filter/cooler circulation circuit
- Stable steel tank
- Thanks to modular principle, unit can be easily extended
- Good accessibility of all components
- Suitable for a multitude of industrial applications
- Long service life
- Low noise emission
- Flow matched to the control and adjustment elements used
|
|
|
|
|
|
L-shaped power units are ideal for demanding high-production industrial applications requiring high fluid volume and flow rate. The readily removable tank cover simplifies cleaning or replacing suction strainers. L-shape power units feature flooded suction inlets that eliminate the need for the pump to lift hydraulic fluid, thus reducing wear-and-tear.
JIC-Style
NFPA/JIC-style power units are especially well suited for heavier duty, continuous-use industrial applications requiring design flexibility and rugged construction.
Low Profile Series
Low profile power units are well suited for industrial applications requiring moderate fluid volume and flow rate. They are an excellent solution to applications in which space is at a premium, or where the power of a NFPA/JIC-Style unit is needed in a smaller, less expensive package.
Little Champ Series
Little Champ power units are designed for use in locations where space is limited and larger, noisier power units are not needed. They're ideal for applications requiring moderate fluid volume and flow rate, short hydraulic lines, and quick cycling.
Little Champ Kits
Little Champ power units can be built at your facility at your convenience. Continental will supply the complete set of components and hardware. Simply order the model code and you'll receive a complete kit to build your own power unit.
Custom Power Units
Exactly What You Need.
Chances are, you'll find a standard Continental Hydraulics power unit from our catalog that will meet the majority of your needs. But when it comes to extra large or special-purpose applications, you may need something that's never been built before; a customized solution tailored to your specific requirements. Examples
|
|
3.2 to 63 l tank content
Steel housing
External gear pump 0.5 to 38 l/min
Multi-range electric motors 0.12 to 11 kW
Various basic circuits
With valve superstructure NG3-Mini to NG6
Return line filter 10 µm
Customer-specific units
Optimized special units
Various hydraulic circuits
Tanks made to measure
Adapted base block made of hydraulic
casting, steel or aluminium
Various accessories
The most diverse monitoring elements
Collaboration with the customer in all
development steps
|
|
Power pack "Slab turnover device"
• Tank volume: 1000 litre
• Flow capacity: 2x max. 160 l/min.
• Working pressure: 2x max. 160 bar
• Power: 82,5 kW
Features:
The entire electrical operation of the power pack occurs using Jet-Control technology and can thus be controlled from anywhere in the world via the Internet!
Power pack for conveying bulk material (pusher plates)
• Tank volume: 800 litre
• Flow capacity: 2x max. 150 l/min.
• Working pressure: 2x max. 240 bar
• Power: 2x 30 kW
|
|
The small drive with the great advantages.
A light, convenient beginner drive with 14kW power.
-Ergonomic: clearly laid out, arranged operator elements.
-Super easy to manage: motor removable for transport.
-Also for 16 A current: change over button.
-Simple handling.
-Can be operated on 16A and 32A current.
|
|
Enerpac introduces the latest innovation in hydraulic pumps.
These new pumps surpass the features and benefits
of conventional electric pump design.
• LCD providing essential user information;
• Self-test, diagnostics and read-out capabilities available;
• High efficiency and low operating costs;
• Easy to service.
|
|
• 11/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25
amps at full load, starts at reduced voltage. CSA rated for intermittent duty.
• 10 foot remote motor control (except PE552S which has a 25 foot remote
motor and valve control).
• True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
• Reservoirs available in sizes up to 10 gallons. See accessories page 109.
• Light weight and portable. Best weight to performance ratio of all Power Team pumps.
• “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-theshelf components to build a
customized pump to fit specific requirements. By selecting standard
components you get a “customized” pump without “customized” prices.
All pumps come fully assembled, less oil and ready for work.
|
|
The World's Only TRUE Industrial Duty Hydraulic Wrench Pump
*Heavy Duty One Piece Chassis
*Heavy Duty Multi-Tool Operation Manifold
*Heavy Duty Permanent Magnet Motor (EP Electric)
*Heavy Duty High Flow Complement Bearing Motor (AP Air)
Available in Electric and Air Driven Model - 115V and 230V
|
|
|
|
Hydraulic power units
