|
|
The Ideal Hydraulic Power Pack is
ergonomically designed for portability!
The Ideal Power Pack is HYTORC!
The JET-Star is the “Workhorse” of electric,
hydraulic pumps. Its flat design makes it handy for easy portability from job-site to job-site. All valves and oil lines are protected with a shroud, designed to provide turbulence to cool the circulating air.
The JET-Star features;
• Oil level indicator
• 4-port manifold
• Micro-precision Valve
• Safety-button Remote Control
and comes complete with Safety hoses, oil and a 15’ remote control, ready to use!
|
|
Pump selection sheet
HP Range
Manually operated pumps
HEP1 Range
Electric driven mini pumps
HEP103 Range
Electric driven two stage
pumps - compact
HEP2 Range
Electric driven two stage
pumps - standard flow
HEP3 Range
Electric driven two stage
pumps - medium flow
HEP5 Range
Electric driven two stage
pumps - high flow
AHP11 Range
Air driven single stage
pumps
HAP Range
Air driven two stage
pumps
HPP Range
Petrol engine driven two
stage pumps
HSP Range
Electric driven split flow
pumps
|
|
Technical specifications:
Electric motor: three-phase induction motor MEC T63C4 or single-phase induction motor MEC M63C2
Power supply: 230 V / 400 V – 50 Hz depending upon the model
Power output: 0.22 kW / 0.25 kW depending upon the model
Absorbed current: 1.6 A / 1.4 A depending upon the model
Protection rating: IP 55
Condenser: 10 µF
Speed of motor rotation: 1,380 rpm / 2,800 rpm depending upon the model
Maximum pressure: 100 bar
Capacity: ranging from 0.5 to 12.5 litres / minute
Data referring to the following test fluid: oil with viscosity n =13 cSt and temperature ranging between 15°C and 20°C
|
|
KL**
• theoretical flow from 0,25 up to 7,8 cm3/rev.
• Working pressures up to 250 bar
• AC-, DC- and three-phase motors
|
|
Standard supplied with Nitrile seals – can be used for a wide range of fluids such as demineralised water, oil/water emulsions, waterglycols, mineral oils
Two speed pumps up to 1000 bar pressure
Buna Nitrile seals can be exchanged with optional EPDM seal for use with Skydrol or brake fluids
Impregnated aluminium anodized pump housing with stainless steel internal pumping components
Externally adjustable pressure relief valve
Internal pressure release valve for overload protection (pump safety valve).
|
|
|
|
|
|
JESSBERGER offers hand operated drum pumps for nearly all applications:
JP-02: Hand pump for detergents and chemicals on water-basis; pump made of Polypropylene with shaft made of SS 316 and seals made of Viton; cause of its telescopic suction tube suitable for 200 l drums and smaller canisters; 0,3 - 0,45 l/ stroke.
JP-03: Hand pump for diesel, anti freezing liquid, oils, water, etc.; pump made of Polypropylene with shaft made of steel and seals made of NBR/ Buna; cause of its telescopic suction tube suitable for 200 l drums and smaller canisters; 0,3 - 0,45 l/ stroke.
JP-04: Chemical hand pump; completely made of Polypropylene, shaft coated with PP and seals made of Viton; cause of its telescopic suction tube suitable for 200 l drums and smaller canisters; 0,3 - 0,45 l/ stroke.
JP-05 (shown at the picture): hand pump for food material or flammable media; made of SS 316 and PTFE; 700 and 1000 mm, 0,3 - 0,6 l/ stroke.
Please note that we have further hand pumps in our range.
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
This pump is the descendant of the authentic Japy manual pump, which has been manufactured in France since 1850.
This new pump complies with the European ATEX CE atex II 2 GD IICT4 (Tf<120°C) standard. It is designed to transfer the water, oil, gasoil, petrol and certain solvents in a potentially explosive atmosphere. The pump includes a 300 micron filter in stainless steel, which protects it from all external intrusion.
It is delivered with an earth cable and a clamp, the connection of which provides electrostatic conductivity.
CAPACITY - 1,3 or 2 m3/h
BODY - Cast
MECHANISM - Brass
GASKET - PTFE
|
|
|
|
|
|
This pump is a descendant of the authentic Japy manual pump, which has been manufactured since 1850 in France.
This new pump complies with the European ATEX CE atex II 2 GD IICT4 (Tf<120°C) standard. It is designed to transfer the water, oil, gasoil, petrol and certain solvents in a potentially explosive atmosphere.
The pump includes a 300 micron filter in stainless steel, which protects it from all external intrusion.
It is delivered with an earth cable and a clamp, the connection of which provides electrostatic conductivity.
In the barrel emptying version, it is equipped with 304L stainless steel tube with a outlet size allowing connection to a barrel or to a tank.
It is supplied with a hose for hydrocarbons or solvents that is able to conduct static electricity.
A stainless steel valve with a stainless steel pouring lip are delivered as standard. This can be replaced by a manual dispensing pistol in nickel brass.
CAPACITY - 1.3 or 2 m3/h
BODY - Cast
MECHANISM - Brass
GASKET - PTFE
BUNG - 1m intake tube in 3/4” stainless steel, 2"
STAINLESS - steel elbow and nozzle output, conductor pipe
OTHER - Earth cable
|
|
Powerful two-speed pump is lightweight and easy to carry
Standard heat exchanger package on PMU-10422 keeps the oil cool under extreme use
Glycerine filled gauge with scales reading in bar and psi
Transparent overlays in Nm and Ft.Ibs for all Enerpac torque wrenches provide a quick torque reference
Adjustable pressure relief valve for accurate torque adjustments and precise repeatability
|
|
The mid-size units shown here have hydraulic flows from 25 to 55 GPM (95 to 208 LPM). These units will drive most of our contractor, municipal and industrial submersible pumps. We offer skid frame and trailer mounted units with diesel engines and electric motor drives. Shown here are many of our standard models. If you need a power unit with features or performance other than standard, please contact us with your requirements.
Available with John Deere and Deutz engines.
Electric powered units available.
Hydraulic flows up to 200 lpm (53 gpm).
Hydraulic pressure up to 170 bar (2,500 psi).
Available with fixed gear or variable piston hydraulic pumps.
Custom twin circuit and other flows and pressure configurations are available.
|
|
These 150 to 200 hp power units have hydraulic flows from 70 to 90 GPM (265 to 340 LPM). These units will drive our high performance submersible pumps and other hydraulically driven equipment. We offer skid frame and trailer mounted units with diesel engines or electric motor drives. Shown here are many of our standard models. If you need a custom power unit with features or performance other than standard, please contact us with your requirements.
Standard engines Deutz and John Deere.
Electric drive models available on request.
Hydraulic flows up to 340 lpm (90 gpm).
Hydraulic pressure up to 170 bar (2,500 psi).
Available with either fixed gear or variable piston hydraulic pumps.
|
|
These portable hydraulic power units have hydraulic flows from 1 to 10 GPM (4 to 38 LPM). These units will drive our smaller submersible pumps and also power most hydraulic tools on the market today. We offer portable units with gas (petrol) engines, diesel engines and electric motor drives. Shown here are many of our standard models. If you need a power unit with features or performance other than standard, please contact us with your requirements.
Engine fuel diesel and gasoline
Fuel tanks up to 56 liters (15 gallons)
Hydraulic flow up to 38 lpm (10 gpm)
Horsepower up to 15 horsepower
Hydraulic pressures up to 142 bar (2,100 psi)
Custom configurations including twin circuits and other pressure and flow combinations are available.
Available with electric start and optional wheel kit.
|
|
* HORIZONTAL DESIGN
* 15-50 GALLON RESERVOIR
* 5 - 10 HP ELECTRIC MOTOR
* 3.75- 10.00 GPM VARIABLE FLOW PISTON PUMP
* UP TO 3000 PSI
* 1-6 STATION DO3 MANIFOLD
|
|
|
|
|
|
Systems for automation of industrial armatures:
Fluid-engineering system elements with a high degree of integration.
Thanks to their compact construction, fluid-engineering systems for single and double-action armatures can be installed directly on the drive without pipe work and in any installed location, and they achieve high protection classes since the motor is encased.
Two-stage design possible for ideal adaptation to the torque pattern of, e.g., flaps, slide valves and valves:
- higher starting and closing moment
- shorter actuating times
- improved energy consumption
- up to 50% lower drive power
Assemblies also possible with variable delivery volume or two delivery stages.
(e.g. for the more accurate positioning of intermediate positions and closed-loop control functions)
Versions with:
- Emergency hand pump
- Hydraulic accumulator
High level of process security:
- No hydraulic clutches
No leaks:
- Surface-mounting construction without screwed joints, pipes and hoses
Small dimensions:
- Permit a compact structural shape
Lower installation expenditure due to integration in the drive system.
|
|
|
This pump, electric-driven, is compact and light in weight, enabling work to be carried out at locations that are difficult to access.
|
|
* VERTICAL DESIGN
* 2 - 10 GALLON RESERVOIR
* 1/2- 5 HP ELECTRIC MOTOR
* .90- 5.00 GPM GEAR PUMP
* UP TO 3000 PSI
* 1 STATION DO3 MANIFOLD
|
|
GT18 Power Units are small and compact featuring a single 5 or 8 gpm (20 or 30 lpm) tool circuit.
HPR Power Units are small and compact and feature either one 5 or 10 gpm (20 or 38 lpm) tool circuit or a twin 5 gpm (20 lpm) tool circuit combinable to a single 10 gpm (38 lpm) circuit.
The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling. The HV18 Converter contains some of the hardware and design features of our "state-of-the-art" power units without the engine.
|
|
ZA 13**
• Tank capacity 13 Litre
• Flow capacity from 2,2 up to 5,4 l/min.
• Working pressures from 140 up to 190 bar
ZA 30 **
• Tank capacity 30 Litre
• Flow capacity from 8 up to 15 l/min.
• Working pressures from 100 up to 170 bar
Also deliverable:
• Power packs with aluminium tanks 44 litres and 70 litres
• Power packs with steel tanks nominal size 12 up to nominal size 1250
• Power packs with special oil tanks
|
|
|
|
|
|
The HP pump is a single acting hand operated pump made of stainless steel W.St.1.4301 making it particularly applicable within the food industry and in environmentally sensitive areas, designed for both oil and water hydraulics.
Application
The pump is designed for simple lifting functions and is used e.g. together with stainless hydraulic cylinders on work platforms and lifting tables or as a standby pump.
Specificationers
The HP pump is equipped with a built-in check and relief valve and is as standard. Available with built-in fluid reservoir and mounting plate.The fluid reservoir has a standard capacity of 0.7 litres, but can be made to suit individual demands.
Vertical installation
Please notice, the hand pump may only be installed in a vertical position.
Filling of reservoir
Oil hydraulics
Fill 0,7 litres of oil in the reservoir, oil viscosity 17 or 22.
Water hydraulics
Fill 0,7 litres of water (tap water) in the reservoir.
When using the pump in an area with risk of frost fill in a mix of min. 30% glycol and 70% water.
|
|
| ... products without technical information |
| |
|
|
Hydraulic power units
