|
|
|
|
|
|
The ZA4T-Series air hydraulic torque wrench pumps can be used with any brand of 700 and 800 bar single- and double-acting hydraulic torque wrenches. The ZA4T come standard with air regulator-filter-lubricator unit, heat exhanger and pressure gauge. The standard pressure gauge with transparent overlay-scales in Nm and Ft.lbs provides accurate torque settings and precise repeatability for all Enerpac torque wrenches. The easy to access adjustable pressure relief valve allow accurate and quick setting of hydraulic pressure. The air motor consumes between 600 - 2840 l/min at 4 - 7 bar dynamic air pressure. ZA4T-Series two-speed air pumps come with 4 or 8 litres reservoir. Through the years the Enerpac line of bolting tools, such as hydraulic torque wrenches and alignment tools, has gained excellent recognition by the offshore and oil & gas markets worldwide. Through its worldwide operations Enerpac is be able to offer application-based solutions and hydraulic systems for the offshore and other industries
|
|
Resato’s new lightweight mini pump unit is available in four pressure ranges up to 1800 bar at 7 bar air drive pressure and 2500 bar at 10 bar air drive pressure.
Key Features:
- Ready-to-use.
- Pressure range up to 2500 bar / 36,250 psi.
- weight of less than 17 kg!
- Lightweight, easy to carry.
- Low noise level.
- Suitable for pressurizing oil, water or other fluids.
- Several pressure ranges available.
- All parts made of non-corrosive materials.
- All operating features panel mounted.
- Completely closed frame.
|
|
|
|
|
|
Power units for clamping technology
Modular systems for a variety of clamping functions...
These assemblies are used primarily in the area of tool and work-piece clamping or wherever a compact construction is required in combination with dense valve technology.
Compact construction volume and a high degree of protection allow direct installation into the clamping device.
Functional safety is reliably achieved by means of leakage-free poppet valves.
The integrated control logic reduces additional interfaces.
The absolutely compact, ready-for-installation hydraulic power units for use in industrial tensioning and clamping applications are distinguished by a maximum degree of reliability. Proven power units from the H0, H1, H3 and H4 series from HOERBIGER range are used. In relation to applications, there is a variety of customer-specific variation possibilities in combination with valves and standard modules from the HOERBIGER catalogue range. The following versions are therefore possible, for example:
- Basic version for attachment of valve modules and for storage charging function
- Reverse operation for H0 and H1 without additional valve control for double-acting cylinders
- Actuation of both single and double-action cylinders
- Clamping functions with support by storage tank, also as a modular system
- Lower oil outlets with high protection class
- Energy-saving double pump version with integrated load-sensing control
- Possibility of direct mounting on the consumer.
|
|
|
The powerful 2-stage hydraulic pumps PO 4 are compact and light and can be transported easily. They reach a long operation time in intermittent duty meeting the highest quality and technology requirements.
|
|
|
Flows to 2.8 l/min Pressures to 240 bar Our compact 108 Series power units let you put the power where you need it. They're completely selfcontained with an AC or DC motor, gearpump, reservoir, internal valving, load hold checks and relief valves. The 108 Series models are designed for intermittent service and come in four standard pump sizes which produce flows of 0.16, 0.31, 0.40, and 0.53 cm3/rev. Locking check valves are available in all models. Performance will vary with the type of fluid used. Several hydraulic circuits are available. 108 Series units are available with single- or bidirectional rotation. Single units are commonly used to charge accumulators, power one-direction hydraulic motors and cylinders, provide pilot flow to servo valves, pressurize lube systems and supply multifunction circuits with external valving. Bi-directional, reversible units operate double-acting cylinders and two-way motors.
|
|
ASW Hydraulic power packs are standard units with compact design.
Reservoir capacity: 8 liters
These unit are designed to operate with hydraulic fluid or synthetic fluids having similar lubricating characteristics
|
|
Hydraulic power packs, series UP...
The design of these units features a high degree of accuracy and they have wide application scope. Bucher Hydraulics power packs are constructed around an integrated system of valves for the various functions. This highlights the equipment’s compact nature, the foundation of its high performance level.
The essential components of the power packs are:
- a manifold block with cavities for various types of valves
- a very quiet, high-efficiency gear pump
- an electric motor (DC or AC)
- a reservoir (plastic or steel)
- several optional accessories
Advantages
Compact and modular construction, limited number of components, quick and easy assembly
Maximum flexibility – numerous circuits can be built from just the few basic versions
Valve cavities conform to international standards
Optimisation of motor-pump unit has produced increased efficiency and low operating noise level
|
|
Higher oil flow and bypass pressure, cooler running and requires 18% less current draw than comparable pumps
Flow: 700 in3/min at 100 psi; 60 in3/min at 10,000 psi
Powerful 1.7 hp universal electric motor provides high power-to-weight ratio and excellent low-voltage operating characteristics
High-strength, molded composite shroud with ergonomic, non-conductive handle for easy transport
Low-voltage pendant
LCD readout provides a number of diagnostic and readout capabilities never before offered on a portable electric pump
Designed to last and easy to service
Steel reservoirs: 1, 2, 2.5, 5 and 10 gallon usable oil
Optional: Back-lit LCD, Pressure transducer, heat exchanger and skidbar.
|
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors, joined with hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control valve for single acting cylinder, pressure gauge remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor cabinet with shut-off valves, hose extentions and other accessories available on request.
|
|
|
Depending on the model LUKAS Motor Pumps Series 6 are suitable for lifting with up to - cylinders. Hydraulic pump and valve assembly are combined in this compact power and control unit. Lifting- and lowering speed of each cylinder can be regulated precisely.
|
|
Electric Pump HYDRAULIC PE17 SERIES
• For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi.
• For intermittent duty; starts under full load.
• Equipped with 1⁄2 hp, 3,450 rpm, singlephase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord)
• Low amperage draw; small generators and low amperage circuits can be used as power source.
• Extremely quiet noise level (67-81 dBA).
|
|
* HORIZONTAL DESIGN
* 15 - 50 GALLON RESERVOIR
* 7-1/2- 10 HP ELECTRIC MOTOR
* 1.80- 10.90 GPM GEAR PUMP
* UP TO 3000 PSI
* 1 STATION DO5 MANIFOLD
|
|
E208-T
The electric motor power high-pressure unit pump with axial piston bistadio (BP 60 bar - 700 bar HP) have been studied to better adapt to all applications for hydraulic dynamometer keys or a simple hydraulic gear and double thanks to the size and in weight.
|
|
ZE-Electric Pump
• For manual valve operation
• Oil flows from 0,55 to 2,73 l/min at 700 bar
• All non-electric options available (see page 6-7)
• Oil level sight glass or indicators
• Single phase electric motors include motor on/off
switch and overload protection
• Carrying handles on all models.
|
|
PME - Electrical pumps
NIKE electric hydraulic pumps are reliable, versatile and easy to use. They are suitable for many different applications.
All pumps have double-speed operation with automatic switching between high and low pressure at 2 MPa - 6 MPa depending on the pump type.
The low-pressure unit is a gear pump that gives a high flow up to the switching pressure. The high-pressure unit is a single or double-piston pump.
|
|
|
Handpumps with or without reservoir for use with corrosive liquids for pressures up to 700 bar. They are as single or two stage. Applications are for example pressure testing when there is no air connection available or backup pump in case the basic pump fails.
|
|
The HFP pump (Hydraulic Foot Pump) of BELL is made in steel to be strong, but also cheaper than other types of pump.
It is a sturdy pump characterized by a less stress on the lever, ideal for the use with hydraulic tools and/or single acting cylinders which require a small quantity of oil.
It does not require air-compressors nor other devices to work, therefore it is practical and easy to operate.
With a maxim relief valve inside, it is safe and avoids higher pressures of oil than the maximum pressure allowed (200bar).
|
|
The great advantage of the foot pump - easily operated by foot making your hands free to handle the tool or cylinder
Robust, durable and lightweight 7,0 kg
Maximum stability - large steel frame and large release footpad
Two-speed pump for single-acting cylinders and tools
Portable - foot pedal lock for easy carrying
Internal pressure relief valve for overload protection
|
|
Air Pump HYDRAULIC PA9 SERIES
• Easier to operate than a hand pump, giving you the speed you need at an affordable price.
• Easy and economical to service; not a “throw away” unit.
• Unique bladder design for allposition operation and storage.
• Operates on 40-120 psi shop air, at 20 cfm.
• Hard-coat anodized aluminum housing.
• Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs.
|
|
• Light weight and compact design
• Durable glass-filled nylon reservoir and nylon
encapsulated aluminium pump base for maximum
corrosion resistance
• Two-speed operation reduces handle strokes by
as much as 78% over single speed pumps
• Lower handle effort to minimize operator fatigue
• Integral 4-way valve on P-842 for operation of doubleacting
cylinders
• Handle lock and light weight construction for easy carrying
• Large oil capacities to power a wide range of cylinders
or tools
• Non-conductive fiberglass handle for operator safety
• Internal pressure relief valve for overload protection
|
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump make up one jack SET with two or four machine jacks.
|
|
HYDRAULIC PUMPS
Hand pumps, Air Hydraulic Foot pumps, Electric Pumps, Ultra High Pressure Hand/Air pumps, Ultra High Pressure Air Pumps, Working pressure from 700 bar to 2800 bar.
|
|
Hydratron Hand Operated Pumps feature all stainless steel wetted parts making them suitable for either oil or water service. Nine models make up the range offering output pressures of up to 25,000 PSI ( 1725 Bar ).
Single and dual piston models are available, the dual piston models having both low and high pressure pistons. This feature permits both fast fill and high pressure capabilities from one single source.
Normally we supply the pumps mounted within stainless steel carrying frames complete with 1 gal ( 4.5 Ltr ) reservoir, outlet pressure gauge and pressure release valve. In this form ( power pack ) the units contain all the necessary controls and instrumentation to carry out on site pressure tests.
Options include larger capacity tanks, larger dia test gauges, built in pressure isolation and safety relief valves. Units can also be provided mounted on wheels to provide manoeuvrebility.
|
|
Hand pumps ZPH 1A/... for single- and double-acting cylinders
LUKAS hand pumps ZPH 1A/... are robust and easy-to-operate two-stage pumps with automatic switch-over from low pressure (LP) to high pressure (HP) mode. The basic version is suitable for operation of a single-acting cylinder.
|
|
Application:
Seawater, alcohol, vinegar
Components:
• Body: bronze
• Internal mechanism: bronze
• Sealing: ramie wire mesh clamped by gland
• Connection: standardised PN 10 flange
• Lever: cast iron (brass on request)
STANDARDISED PN 10 FLANGE
Flow rate of 1.3 to 2.7 m3 / hr
|
|
|
Simplex offers the widest selection of hand pump, styles, reservoir sizs and flow rates to meet your everyday requirements. Each pump has specific features that make cetain models better suited for particular jobs.
|
|
|
|
|
|
The HP pump is a single acting hand operated pump made of stainless steel W.St.1.4301 making it particularly applicable within the food industry and in environmentally sensitive areas, designed for both oil and water hydraulics.
Application
The pump is designed for simple lifting functions and is used e.g. together with stainless hydraulic cylinders on work platforms and lifting tables or as a standby pump.
Specificationers
The HP pump is equipped with a built-in check and relief valve and is as standard. Available with built-in fluid reservoir and mounting plate.The fluid reservoir has a standard capacity of 0.7 litres, but can be made to suit individual demands.
Vertical installation
Please notice, the hand pump may only be installed in a vertical position.
Filling of reservoir
Oil hydraulics
Fill 0,7 litres of oil in the reservoir, oil viscosity 17 or 22.
Water hydraulics
Fill 0,7 litres of water (tap water) in the reservoir.
When using the pump in an area with risk of frost fill in a mix of min. 30% glycol and 70% water.
|
|
SF-OE00729/730 Standard Hand Pump
WDSSF
Technical Information 1.5 litre container Output complete cycle 25cm3 Maximum pressure (blow off) 175kgf/cm2 Effort required on handle at operating pressure of 100 bar = 22kgs
SF-OE00490/491 Dual Displacement Pump
WDSSF
Technical Information 2.9 litre container Normal operating pressure 100 bar Change over pressure 33 bar Maximum pressure (blow off) 175kgf/cm2 Effort required on handle at operating pressure of 100 bar = 18kgs
|
|
Amazon Thrudeck
c/w detachable handle and through deck kit
For mounting through deck or through bulkhead
Readily achievable 50 Litres/min (11 gallons/min) output
Features::
• The ultimate compact through deck pump with no less than 16 port variations relative to the body
• Loosening just one screw lets you clear blockages or re-position the body anywhere through 360º
• relative to the handle position
• Complete with stainless steel handle, mounting clips and provision for safety lanyard
• Sleekly styled through deck kit and cover, with 4 mounting positions relative to the pump
|
|
|
|