|
|
External adjustable pressure relief cock (behind sight glass)
Lower air consumption and operating costs
Return-to-tank port for use in remote valve applications
Internal pressure relief valve provides overload protection
High efficiency cast aluminium pneumatic motor
Air pendant for professional remote control operation |
|
The Enerpac ZA4 - The Next Generation in Air Powered Suppliers of hydraulic pumps
Introducing the ZA4-series, Enerpac’s newest high-pressure hydraulic air-driven pumping designed for in-plant, industrial applications and medium to large construction projects. The new ZA4 pump features the Z-Class high efficiency pump design—a design known for its higher oil flow and bypass pressure. Whether powering a professional cylinder or operating a tool, the ZA’s industry-leading hydraulic flow at 700 bar will improve productivity in any application. And, because of their ATEX 95 certification, the Enerpac ZA Pumps are safe for use in environments such as refinery, petro-chemical and oil & gas processing.
Reservoirs come in 4 to 40 litres capacities. A sight gauge on the 4 and 8 litres models and a manufacturer of level gauge on the larger reservoirs allow quick and easy oil level monitoring. The manual governor valves on ZA4-series pumps come with built-in user adjustable pressure relief cock. Standard models are available to fit most applications and custom configurations, when required, are available from an extensive ordering matrix.
The optional manufacturers of heat exchanger warms exhaust air to prevent freezing and cools the hydraulic oil.
Enerpac ZA Series Air Hydraulic Pumps—tough, dependable and innovative.
|
|
- Air Drive line lubrication not required.
- Self-priming for immediate operation.
- Compatible with all hydraulic fluids, plain water, distilled &
deionized water, solvents, mild chemicals and most liquefied
aerosol type gases.
- Range of models to provide up to 80,000 psi intermittent
output pressure.
- Stainless steel hydraulic body, non return valves, and trim are
standard, except -4 and -7 models.
- Alternative gases that can drive the pump include nitrogen,
vapor from liquefied gas, pipeline natural gas and sour
natural gas with proper modifications.
- Offer a wide range of standard modifications. |
|
The air-hydraulic PROFESSIONAL BELL units are meant to operate single and double acting cylinders depending on the versions. This type of pump can be applied in all the hydraulic applications, especially in those which require high performances and pressures, and in all cases in which the oil flow must be modulated and controlled.
There are many applications, in the industiial field, such as stirrup, industrial presses, extractors, pullers, professional hose professional fitting, bead breakers, clamping equipments, as well as in the automotive field for example car and motorbike lifts, pulling bars for bodyworks straightening benches. |
|
The ZA4T-Series air hydraulic torque wrench pumps can be used with any brand of 700 and 800 bar single- and double-acting hydraulic industrial torque wrenches. The ZA4T come standard with air regulator-filter-lubricator unit, heat exhanger and manufacturer of pressure gauge. The standard pressure gauge with transparent overlay-scales in Nm and Ft.lbs provides accurate torque settings and precise repeatability for all Enerpac torque wrenches. The easy to access adjustable pressure relief cock allow accurate and quick setting of hydraulic pressure. The pneumatic motor consumes between 600 - 2840 l/min at 4 - 7 bar dynamic air pressure. ZA4T-Series two-speed professional air pumps come with 4 or 8 litres reservoir. Through the years the Enerpac line of bolting tools, such as hydraulic torque wrenches and alignment tools, has gained excellent recognition by the offshore and oil & gas markets worldwide. Through its worldwide operations Enerpac is be able to offer application-based solutions and hydraulic systems for the offshore and other industries
|
|
Because of the unique integrated professional fan configuration, the "ready for connection" hydraulic power packs are ideal for continuous operation. Annother version for temperature sensitive applications features an auxiliary professional blower, thereby gaining improved cooling (approx. 25%). This type is available for single circuit operation (radial piston or manufacturer of gear pump), dual circuit operation (radial piston and/or gear pump) or triple circuit operation (radial piston pump only). Both single and dual circuit pumps are also available as a horizontal version (type HKL).
Complete hydraulic control systems can be created by directly mounting various combinations of connection blocks and cock banks to the hydraulic power pack. These hydraulic power packs are used for machine tools (lathes manufacturers and milling units), jigs or general machine applications, making a commonly used external professional radiator superfluous.
|
|
Power units for clamping technology
Modular systems for a variety of clamping functions...
These assemblies are used primarily in the area of tool and work-piece clamping or wherever a compact construction is required in combination with dense valve technology.
Compact construction volume and a high degree of protection allow direct installation into the clamping device.
Functional safety is reliably achieved by means of leakage-free poppet cocks.
The integrated control logic reduces additional interfaces.
The absolutely compact, ready-for-installation hydraulic generators for use in industrial tensioning and clamping applications are distinguished by a maximum degree of reliability. Proven power units from the H0, H1, H3 and H4 series from HOERBIGER range are used. In relation to applications, there is a variety of customer-specific variation possibilities in combination with valves and standard modules from the HOERBIGER catalogue range. The following versions are therefore possible, for example:
- Basic version for attachment of valve modules and for storage charging function
- Reverse operation for H0 and H1 without additional valve control for double-acting cylinders
- Actuation of both single and double-action cylinders
- Clamping functions with support by storage tank manufacturers, also as a modular system
- Lower oil outlets with high protection class
- Energy-saving double pump version with integrated load-sensing control
- Possibility of direct mounting on the consumer.
|
|
| The powerful 2-stage hydraulic pumps PO 4 are compact and light and can be transported easily. They reach a long operation time in intermittent duty meeting the highest quality and technology requirements. |
|
| Flows to 2.8 l/min Pressures to 240 professional bar Our compact 108 Series power units let you put the power where you need it. They're completely selfcontained with an AC or Dc motor specification, gearpump, reservoir, internal valving, load hold checks and relief cocks. The 108 Series models are designed for intermittent service and come in four standard pumping sizes which produce flows of 0.16, 0.31, 0.40, and 0.53 cm3/rev. Locking manufacturer of check valves are available in all models. Performance will vary with the type of fluid used. Several hydraulic circuits are available. 108 Series units are available with single- or bidirectional rotation. Single units are commonly used to charge accumulators, power one-direction industrial hydraulic motors and cylinders, provide pilot flow to servo valves, pressurize lube systems and supply multifunction circuits with external valving. Bi-directional, reversible units operate double-acting cylinders and two-way motors. |
|
Higher oil flow and bypass pressure, cooler running and requires 18% less current draw than comparable pumps
Flow: 700 in3/min at 100 psi; 60 in3/min at 10,000 psi
Powerful 1.7 hp universal electricity motor provides high power-to-weight ratio and excellent low-voltage operating characteristics
High-strength, molded composite shroud with ergonomic, non-conductive handle for easy transport
Low-voltage pendant
LCD readout provides a number of diagnostic and readout capabilities never before offered on a portable electric pump
Designed to last and easy to service
Steel reservoirs: 1, 2, 2.5, 5 and 10 gallon usable oil
Optional: Back-lit LCD, Industrial pressure transducer, manufacturer of heat exchanger and skidbar.
|
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors suppliers, joined with professional hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control faucet for single acting professional cylinder, pressure gauge manufacturers professional remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor professional cabinet with shut-off cocks, hose extentions and other accessories available on request.
|
|
| Depending on the model LUKAS Motor Pumps Series 6 are suitable for lifting with up to - cylinders. Hydraulic pump suppliers and cock assembly are combined in this compact power and control unit. Lifting- and lowering speed of each professional cylinder can be regulated precisely. |
|
Simplex 10,000 psi / 700 bar pumps are engineered for all types of applications. These industrial hydraulic pumps are best suited for small to large size tools or cylinders. Large selection to choose from.
|
|
Electric Pump HYDRAULIC PE17 SERIES
• For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi.
• For intermittent duty; starts under full load.
• Equipped with 1⁄2 hp, 3,450 rpm, singlephase, thermal protected induction motor; 10 ft. professional remote control cord (PE172S has 25 ft. cord)
• Low amperage draw; small professional generators and low amperage circuits can be used as power source.
• Extremely quiet noise level (67-81 dBA). |
|
ZE-Electric Pump
• For manual cock operation
• Oil flows from 0,55 to 2,73 l/min at 700 bar
• All non-electric options available (see page 6-7)
• Oil level sight glass or indicators
• Single phase electric motors include motor on/off
switch and overload protection
• Carrying professional handles on all models. |
|
| Handpumps with or without reservoir for use with corrosive liquids for pressures up to 700 bar. They are as single or two stage. Applications are for example pressure testing when there is no air connection available or backup pump in case the basic pump fails. |
|
The HFP pump (Hydraulic Foot Pump) of BELL is made in steel to be strong, but also cheaper than other types of pump.
It is a sturdy pump characterized by a less stress on the lever, ideal for the use with hydraulic tools and/or single acting cylinders which require a small quantity of oil.
It does not require air-compressors nor other devices to work, therefore it is practical and easy to operate.
With a maxim relief cock inside, it is safe and avoids higher pressures of oil than the maximum pressure allowed (200bar). |
|
The great advantage of the foot pump - easily operated by foot making your hands free to handle the tool or cylinder
Robust, durable and lightweight 7,0 kg
Maximum stability - large steel frame and large release footpad
Two-speed pump for single-acting cylinders and tools
Portable - foot pedal lock for easy carrying
Internal pressure relief cock for overload protection
|
|
Professional air pump HYDRAULIC PA9 SERIES
• Easier to operate than a hand pump, giving you the speed you need at an affordable price.
• Easy and economical to service; not a “throw away” unit.
• Unique bladder design for allposition operation and storage.
• Operates on 40-120 psi shop air, at 20 cfm.
• Hard-coat anodized aluminum housing.
• Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs. |
|
• Light weight and compact design
• Durable glass-filled nylon reservoir and nylon
encapsulated aluminium pump base for maximum
corrosion resistance
• Two-speed operation reduces handle strokes by
as much as 78% over single speed pumps
• Lower handle effort to minimize operator fatigue
• Integral 4-way cock on P-842 for operation of doubleacting
industrial cylinders
• Handle lock and light weight construction for easy carrying
• Large oil capacities to power a wide range of cylinders
or tools
• Non-conductive fiberglass handle for operator safety
• Internal pressure relief valve for overload protection |
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump manufacturers make up one jack SET with two or four machine jacks. |
|
- Working pressure up to 2800 bar / 40,000 psi
- Easy manual operation
- Large stroke capacity
- Stainless steel and bronze materials
- Optional stainless steel reservoir |
|
| Simplex offers the widest selection of hand pump, styles, reservoir sizs and flow rates to meet your everyday requirements. Each pump has specific features that make cetain models better suited for particular jobs. |
|
Features:
- All metal construction, won't burn through in splicer environments.
- Formed metal handle provides less flex, and reduces operator fatigue.
- Convenient fill port on P23 and P55 allows pumps to be filled in a
horizontal or vertical position.
- Fill cap professional seal acts as safety tap preventing over-pressurizing of reservoir.
- Relief cock inboard of check valve manufacturers prevents loads from drifting down.
- Large valve knob gives added control for slowly metering loads down. |
|
|
Hydraulic power units
