|
|
CASTALIA, the condensing absorption chiller with power modulation, (Systema S.p.A. patent-pending), for the production of cooling and hot water, can be used as a heating system in winter and as a cooling system in summer.
The installation of this brand-new product guarantees important energy savings in comparison with the traditional separated systems such as boiler and electric chiller.
CASTALIA is composed by a highly efficient premixed gas burner with modulation combined with an exchanger: the NOX emissions are very low.
There is the possibility to choose the equipment between 8 different models, with a heating capacity from 12.9 kW to 139.2 kW and a thermic performance of 107.4%.
The available cooling capacity range is 12.5 kW - 115 kW with a cooling performance of 103% that can reach 130% if we consider the energy recovery for the production of sanitary hot water.
|
|
Twin energized mono-split : electrical cooling / natural gas heating
for commercial or industrial buildings.
Optimization of power (100% heating / 50% climatization)
Internal unit is designed for ceiling mounting :
Esthetism
Low noise level
Internal unit includes gas fired exchanger + R410A coil + centrifugal fans + filter.
External unit R410A type is for cooling only, compressor scroll, helicoïd fan
Regulation is controled with field bus thermostat, for 8 units max.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
A complete line of precision air conditioning systems to cool data centers and critical systems with precise, reliable control of temperature, humidity and air flow.
Liebert DS - 50 & 60Hz: Precise control of temperature and humidity for mission critical equipment. Flexible configurations, energy efficient and advanced controls and digital scroll make the Liebert DS perfect for sensitive electronics. 28-105kW (8-30 tons) downflow & upflow models.
Liebert XD - high density supplemental cooling for very dense computing environments. Scalable platform offers ultra flexibility.
Ceiling and wall mount cooling systems.
|
|
Stores often feature the latest in designed decor with this refined beauty attracting customers. On the other hand, offices employ a functional beauty to encourage employees to work hard and apply intelligence and passion to their tasks. In either situation, a certain elegance should fill the space because thinking minds require high quality air conditioning.
Daikin's SkyAir units realise a comfortable indoor environment. All over the world, stores, offices, and homes prefer the low operating noise, attractive design, complete comfort control, and other benefits brought by SkyAir.
|
|
24 hour on-line diagnostic system
Energy saving and extention of aircon operating life
Maintenance management via service reports
Reliable service at short lead time
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
|
Air conditioners, based on Peltier technology, are thermoelectric units for heating and cooling of gases, mostly air. The INHECO thermoelectric air conditioner is a ready-to-install unit which is used for the cooling of control cabinets and outdoor applications. The complete unit can be easily and quickly installed and can be used without application of detrimental refrigerants. The INHECO air conditioners are optimized for use in harsh environments and are mostly certified to either ATEX or IP54 standard.
|
|
The Air recirculation equipment (ERA) provides air free of corrosive gases in the environments that contain computers, engines and electronic control centers
The industries where it is used are smelters, pulp and paper plants, petrochemicals, and laboratories. There is a complete range of filtering media to eliminate with two passes of granulate the most diverse gases.
The most common are: hydrogen sulfite, sulfur dioxide, nitrogen oxides, chlorine compounds, ammonia...
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
1 way cassette, designed for offices air treatment. 300 mm high, this unit can be settled into staff or modular false ceiling.
Coanda effect outlet slads.
2 sizes are available :
600 x 600 mm max. cooling power 3KW - heating 5 KW
600 x 1200 mm max. cooling power 6KW - heating 10 KW
Options : confort screen, 400 mm high casing, condensate pump
All regulations are available (incl. infra-red)
|
|
Conveni-pack is a compact low noise system which integrates
high and low temperature refrigeration and air conditioning,
including heating, into one system.
The Conveni-pack system consists of an inverter driven outdoor unit and indoor air conditioning units that can be connected to high temperature refrigeration cabinets and unit coolers.
Conveni-pack can fully meet the demands for refrigeration and air conditioning heating and cooling.
For more information, please take a look at the Conveni-pack catalogue.
|
|
Liebert XD™ System
Liebert energy-efficient and flexible high heat density cooling solutions are available with Open or Closed architecture and Pumped Refrigerant-based or Water-based technology.
Liebert XD refrigerant-based cooling modules work as a system to support the hot aisle/cold aisle approach to cooling high heat density data centers. The modules provide focused rack cooling, enhancing a room precision cooling unit, such as a Liebert DS system. Pumped refrigerant is ideal for use around electronic equipment, operating at low pressure in the piping circuit, and becoming a gas at room conditions.
|
|
SLIM-IN Line
Door/Wall mounting System description
Specifically developed for door or wall mounting, the air conditioners of the series SLIM-IN cover a cooling capacity range from 850W to 2500W.
They are available in 230V (and some items in 400V).
Common to most of the SLIM-IN models is the Maintenance Free concept.
All models are equipped with an electronic board (not for EVE08).
::Reciprocating hermetic compressor with thermal amperometric protection ::Ecological R134a refrigerant, CFC free ::Condensing and evaporating heat exchange coils in copper pipe with aluminium fins ::Internal and external fans on ball bearings with internal thermal protection ::Electronic board EBB (For EVE08 Internal mechanical thermostat set at 35°C, dead band 4°C) ::Power supply wire 3m long ::Steel sheet front cover powder painted RAL 7032 orange peel ::Zync plated frame
Optionals
::Stainless steel frame and front cover ::Not standard colour (RAL) ::Electronic board EBB (not available for EVE03)
|
|
|
|
|
|
The thermal management program is a computer-aided calculation system for switch cabinet air-conditioning.
It takes care of all the worries associated with production standstill caused by overheated switchgear systems.
The program contains databases of the Eldon enclosures, their dimensions, the conditioning devices (filter/fans, cooling units, heat-exchangers) and a selection of the most used electrical components with their heat dissipation. Additional databases can be created within the program.
After having chosen the enclosure type and size, given all the environment conditions (enclosure situation, required equipment temperature, ambient temperature and heat dissipation), the program will propose the most appropriate conditioning solution. A calculation report can then be printed.
To allow the installation study of the cooling devices on the enclosures in the early stage of a project, dimensional drawings of all the devices will be provided in CAD system DXF and AutoCAD file formats soon. You can find the different dimensions in our datasheets.
|
|
|
|
|
|
Dynaciat
Chiller connectable to groundwater or underground loops or a medium-capacity dry cooler or cooling tower to cool residential buildings and commercial, industrial and healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for installation in heated or insulated enclosed rooms.
15 models available
Cooling capacity: 35 to 350 kW
- LG: With air-cooled condenser,
- LGN: Without condenser, may be connected to a dry air cooler.
- R410A refrigerant,
- Compact, space-efficient unit,
- Fully encased in a housing constructed of detachable coated metal panels,
- One or two independent refrigerant circuits,
- One to four new-generation, high-efficiency scroll compressors,
- Water-cooled brazed plate heat exchangers,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
|
|
|
Air condensing chiller (option water condenser) designed for spot cooling or centralised cooling system . Range from 1 to 350 KW monobloc factory equiped with tank and pump. Numerous options allowed adaptable to each process .
|
|
The HLA range of air cooled water chillers offers the most advanced design to satisfy today's industrial cooling equipment requirements.
The entire range is packed with the latest technology and assembled with components developed with our world-renowned manufacturing partners including Maneurop, Danfoss, Siemens and Grundfos.
Industrial Applications:
* Plastics & Rubber
* Chemical
* Pharmaceutical
* MRI Machines
* Food Manufacturing
* Breweries
* Printers
* Engineering
* Lasers
|
|
The compact, high efficiency, low noise and low vibration design if further enhanced with the on board Hitachi microcomputer, allowing extremely accurate set point control. As would be expected from one of the leading names in the industry, the Hitachi Samurai Range includes a multi-point fault and alarm system, through the 4, 7 segment LCD displays.
- R407c Refrigerant
- hitachi Screw Compressor
- Modulating Capacity Control 25-100%
- Plate Heat Exchanger
- Economiser Circuit
|
|
Koolant Koolers C Series chillers are an all-in-one package, including the refrigeration circuit, tank and pump - all sized to suit your cooling needs. This unit is available in one to hundreds of tons of cooling, utilizing multi-module cooling of your water application. This design is also well-suited to be utilized with indirect cooing with heat exchanger packages for all fluid types, including acid and coating technologies. The C Series utilizes a submersed copper coil heat exchanger to offer extra freeze protection in situations where glycol cannot be used in your water.
|
|
|
Polytech has years of experience integrating cooling with our filtration systems to meet exacting process requirements. We can size and provide heat exchangers or immersion coils and controls for use with plant chilled water systems or provide stand alone air cooled liquid chillers for temperature control.
|
|
30RA Outdoor Air Cooled Central Chillers 10-60 Tons
Outdoor Series, air-cooled central chillers from Sterling are designed for exterior installation, freeing up valuable indoor equipment space. Featuring premium quality scroll compressors, there are 11 models available with cooling capacities from 10-60 tons.
* Hermetic scroll compressors
* Direct expansion type brazed plate evaporator(s)
* Aluminum fin/copper tube condenser with direct drive reinforced polymer fans
* Standard ambient operation from -20ºF to 125ºF (-29ºC to 52ºC). Wind baffles required for -20ºF operation
* R-22 refrigerant
* Safeties include: high and low refrigerant, freezestat, phase loss, motor overload, and reverse rotation of the compressor
|
|
Water Cooled / Condenserless Chiller Range
Features
6 sizes from 371 to 783kW
Designed for R407c refrigerant
Multiple reciprocating compressor design
Prodialog Plus electronic control and EXV
Heat Machine version available (30HZ"P")
Condenserless version available (30HZ"V"
|
|
COOLMAX Compact Chillers
Powerful, compact air cooled chillers with 10 kW to 90 kW cooling capacity
Reliable WITTMANN microprocessor controller
Large surfaced built in air condenser with fan neck
Automatic filling visual control via sight glass
3–7 kW centrifugal pumps with flow volume of 14 cubic meters per hour
Hermetically welded quality compressors
Anti-freeze control
Pressure relieve valve in the cooling circuit
* For each model there are 5 and 7 kW pumps with larger flow rates available.
* The pumps are protected with a motor protective relay and with a bypass line to prevent too high pressure in the line.
* In the condenser the aluminum fins are generously spaced to prevent accumulation of dust.
* Moreover the copper piping in the compressor line has few welded parts and is formed in order to prevent leakage.
|
|
|
|
|
|
Aquaciat Power
High-capacity air-cooled chiller for cooling of commercial, industrial or healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
- R-410A refrigerant,
- Compact unit takes up little ground space,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- Two independent refrigerant circuits,
- Four to six new-generation, high-efficiency scroll compressors,
- Water-cooled brazed-plate heat exchanger,
- Six to eight propeller fans,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Total or partial energy recovery.
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
Four models available
Cooling capacity: 330 to 500 kW
- LD: Without hydraulic system,
- LDC: With hydraulic system, without tank,
- LDH: With complete hydraulic system and tank.
|
|
|
|
|
|
The new Piovan Digitemp Thermorefrigerators heat and cool the process circuit of injection and blow moulding machines. They integrate both temperature control and free-cooling functions, and provide water to every single circuit at specific temperature (from -5°C to +90°C for every single circuit), pressure and water flow.
Advantages:
Significant reduction of energy consumption
The combination of compressors with digital technology and the electronic expansion valve - installed in all the Digitemp models in their standard version - ensures the greatest energy efficiency. Moreover, the exclusive Piovan solution which does not require an internal re- circulating pump further increases energy savings.
Reduced running costs
Thanks to the possibility to use the free-cooling system included in the standard unit, they can provide water coming from the dry cooler or the evaporation tower.
Ultra-compact design
With a floor dimension of only 0.4 m2 and a height of 108 cm, these models are the most compact units present on the market at the moment.
Realibility and long life
The possibility of power modulation from 10 to 100% allows the compressor to function continuously, thus eliminating the risk of breakdowns and ensuring long duration of the motor.
Maximum flexibility
The Digitemp models represent the ideal solution whenever it is necessary to manage the demands of different temperatures of every single processing machine, with no waste. Available in the single and dual circuit versions, they can be equipped with medium or high pressure pumps, which guarantee adequate water flow and thermal exchanges, in any application.
|
|
Air cooled chillers CA Series
With a cooling capacity from 71 to 871 kW, the CA Series water chiller has been designed to operate in stringent conditions, with ambient air temperatures from -20°C up to +49°C.
Advantages:
- Scroll compressors, significantly reducing energy consumption and noise levels
- Stainless steel brazed-plate evaporators for a highly efficient heat exchange
- Internal water circulation pump for optimal flow (optional)
- Internal galvanized and insulated tank for temperature stability and energy saving
- Various safety devices to protect the unit and guarantee optimal functioning
- Reliable and sophisticated microprocessor control; it displays key water temperature visualisation and alarms in a simple format.
- Green refrigerant R407C, in line with Piovan’s respect towards environmental concerns
|
|
Lagon range composed of 11 models, covering a flow scale from 1 000 to 72 000 m3/h.
- Various configuration available to meet air conditioning requirements.
- Different orientations for suction and blowing sides.
- Very wide scope of modular arrangement available.
New design to facilitate servicing and maintenance.
- Access to components through large hinged or sliding doors.
- Maintenance panels open by ¼ turn lochs.
- Filters to international sizes.
- Smooth internal sections to facilitate cleaning.
New design additional advantages.
- White RAL 9010 pre-lacquered sheet for external panel.
- Extruded aluminium structure with reinforced corners and integrated frame.
- External panels with a minimum visible screws.
Quality design.
- Double panels, 50 mm thickness.
- Insulation seals between 1st and 2nd wall.
- Compressed seal between panel and structure.
- Internal elements of recognised brand well to obtain a high quality product.
|
|
Climaciat Airtech
Air handling unit designed to meet the various mixing, filtration, heating, cooling, dehumidification, humidification, ventilation, recovery and sound attenuation needs in commercial, industrial and healthcare applications. Available as a horizontal unit for indoor installation or outdoor installation with canopy and protective accessories. Every model in the range may be ordered as single or dual path.
Available in 11 models with air flow rates of 1,000 to 66,000 m³/h
|
|
|
The Deltafrimair® range has been designed principally to deal with the treatment of air to solve air-processing problems and to meet the high demands of industry. The standard range encompasses varying airflow’sfrom 1000m3/hr to more than 50,000m3/hr, and offers a multitude of possibilities concerning the mixing plenum, the filtration level, batterybank (heating and cooling exchanger), humidification systems, fan
|
|
|
|
Air conditioning
