Material testing machine: compression, tensile, bending, ...

126 companies | 1082 industrial products

Companies per page

A&D COMPANY, LIMITED 25 - 300 kN | TENSILON RTF series
universal testing machine (UTM) 25 - 300 kN | TENSILON RTF series A&D COMPANY, LIMITED

The TENSILON RTF is our newest universal testing machine offering innovative measuring possibilities, based on A&D’s newly-developed and extensive technological...

A&D COMPANY, LIMITED 1 - 10 kN | TENSILON RTG series
universal testing machine (UTM) 1 - 10 kN | TENSILON RTG series A&D COMPANY, LIMITED

The TENSILON RTG is our newest universal testing machine providing, cost-effective measurement...

A&D COMPANY, LIMITED 0.5 - 2.5 kN | STA series
materials testing machine 0.5 - 2.5 kN | STA series A&D COMPANY, LIMITED

The STA Series is an advanced multi-purpose tester with the ability to test a wide range of products and materials in a wide range of opeting conditions. The STA Series...

A&D COMPANY, LIMITED -100 °C ... +400 °C | RPT-3000W
material viscoelasticity testing machine -100 °C ... +400 °C | RPT-3000W A&D COMPANY, LIMITED

This instrument allows measurement of visco-elastic physical properties under a curing process and the surface layer physical properties of the material being measured and other materials such as inorganic...

A&D COMPANY, LIMITED 0.05 - 1.6 x 10^5 Mpa, -150 °C ... +400 °C | DDV series
material viscoelasticity testing machine 0.05 - 1.6 x 10^5 Mpa, -150 °C ... +400 °C | DDV series A&D COMPANY, LIMITED

For measurement of the dynamic modulus of viscoelasticity of high polymers like plastic, rubber and complex material, tensile method, shear method and 3-point bending methoud can be applied in accordance...

A&D COMPANY, LIMITED 2 - 1 000 Ncm | EFM-III series
friction and wear tester 2 - 1 000 Ncm | EFM-III series A&D COMPANY, LIMITED

The EFM-III series is a friction and wear tester for tribology evaluation in conformity with JIS K 7218. This tester is designed for scientific elucidation and technical evaluation of the characteristics...

Olympus Industrial BondMaster 1000e+
composite material bond tester BondMaster 1000e+ Olympus Industrial

The BondMaster 1000e+ allows users to select the best method for a particular application and to inspect a wide variety of composite materials. Its high performance, light weight, and rugged durability...

Olympus Industrial OmniScan MX ECA/ECT
composite material bond tester OmniScan MX ECA/ECT Olympus Industrial

Bond Testing Improvements C-scan imagery. Can drive up to eight different frequencies at the same time. Dimensioning capabilities. Improved POD. Phase/Amplitude display mode Important to Note Detection...

Mettler Toledo Analytical Instruments -190 ... 600 °C | DMA 1
dynamic mechanical analyzer (DMA) -190 ... 600 °C | DMA 1 Mettler Toledo Analytical Instruments

The DMA 1 is a multipurpose DMA. Measurements can be carried out in all standard deformation modes (bending, tension, shear and compression), even in liquids or at defined relative humidity levels. A...

Mettler Toledo Analytical Instruments - 150 ... 500 °C, max. 1 000 Hz | DMA/SDTA861e
dynamic mechanical analyzer (DMA) - 150 ... 500 °C, max. 1 000 Hz | DMA/SDTA861e Mettler Toledo Analytical Instruments

The METTLER TOLEDO DMA/SDTA861e is the latest DMA introduced in the market. In comparison...

17 products IMADA
IMADA 50 N | MS
displacement force test stand 50 N | MS IMADA

Compact Multi Test Stand [Use]  For various measurement of tensile and compression.  For assessment...

IMADA 500 N | HV
manual tensile test stand 500 N | HV IMADA

Manual Test Stand [Applications] - Various material testing up to 500N (measuring of tensile strength, compressive strength,...

IMADA 1000 N | HV
manual tensile test stand 1000 N | HV IMADA

Manual Test Stand [Applications] - Various material testing up to 1000N (measuring of tensile strength, compressive...

IMADA 500 N | LH
wire harness pull test stand 500 N | LH IMADA

Wire Harness Pull Tester [Application] -Measuring of caulking strength...

IMADA 1000 N | SH
manual horizontal tensile and compression test stand 1000 N | SH IMADA

Manual Test Stand [Applications] - Various material testing up to 1000N (measuring of tensile strength, compressive strength, shearing strength...

IMADA 50 N | KV
force measurement stand 50 N | KV IMADA

Handheld test stand [Applications] n For touching force measurement of touch...

27 products Instron
video Instron max. 600 kN | 5900 Series
compression testing machine max. 600 kN | 5900 Series Instron

The 5900 Series Universal Testing Instruments offer exceptional performance and are designed with enhancements that deliver superior accuracy and reliability, improved ergonomics, and an enhanced overall...

video Instron max. 5000 kN | RD Models
compression testing machine max. 5000 kN | RD Models Instron

The SATEC RD compression testers are ideally suited for advanced concrete compression testing where frame stiffness is critical. Features...

video Instron max. 600 kN | LX Model
tensile/compression testing machine max. 600 kN | LX Model Instron

Features * Single footprint design that combines the load frame, hydraulic power supply, electronics and control panel into a single package - reduces floor space requirements by more than 60%....

Instron 1500 kN | Model DX
hydraulic universal testing machine (UTM) 1500 kN | Model DX Instron

SATEC Series DX Models The SATEC DX Models are ideal for high-capacity tension, compression, flex, and shear testing. These frames feature two test spaces so users can quickly change between tension...

Instron 100 kN | 8800
servohydraulic fatigue testing machine 100 kN | 8800 Instron

Low-Capacity 8800 Servohydraulic Testing Systems These servohydraulic testing systems are ideal for performing...

video Instron 3500 kN | Model KN
hydraulic universal testing machine (UTM) 3500 kN | Model KN Instron

SATEC Series KN Models KN Models are ideal for high capacity tension, compression, flex and shear testing. These frames feature an ultra large, single test space and so users can easily and safetly load...

Lloyd Instruments 5 - 50 kN
tensile/compression testing machine 5 - 50 kN Lloyd Instruments

Twin Column Testing Machines 5-50 kN (1124-11241 lbf) For applications in the mid force range, Lloyd Instruments offers a wide range of testing machines and accessories for forces up to 50...

Lloyd Instruments 1 - 5 kN
materials testing machine 1 - 5 kN Lloyd Instruments

Single Column Testing Machines 1-5 kN (225-1124 lbf) Lloyd Instruments offers a range of affordable single column test machines for a wide...

Lloyd Instruments 1 kN | LS1
table top materials testing machine 1 kN | LS1 Lloyd Instruments

The new LS1 is an affordable high precision solution for materials testing applications up to 1 kN / 225 lbf capacity which, when combined with our extensive range of grips, fixtures, extensometers and...

Lloyd Instruments 5 - 50 kN | LR5KPlus
materials testing machine: tension, compression, torsion 5 - 50 kN | LR5KPlus Lloyd Instruments

The LR5KPlus testing machine combines high performance, flexibility and exceptional ease of use. It is ideal for testing applications up to 5 kN (1124 lbf) and designed equally for routine quality control...

Lloyd Instruments 100 - 150kN | LS100Plus
materials testing machine 100 - 150kN | LS100Plus Lloyd Instruments

The bench mounted LS100Plus testing machine combines high performance, flexibility and exceptional ease of use. It is ideal for testing applications up to 100 kN (1124 lbf) and designed equally for routine...

Lloyd Instruments FT1
friction tester for plastic film and paper FT1 Lloyd Instruments

Friction Testers 1 kN (225 lbf) NEW PRODUCT: Dedicated Friction Tester for Accurate Measurement of Static and Kinetic Coefficient of Friction For use in the packaging and printing industries, the...

31 products Mecmesin
Mecmesin max. 0.5 kN | MultiTest 0.5-i
vertical tensile testing machine max. 0.5 kN | MultiTest 0.5-i Mecmesin

The MultiTest 0.5-i provides a powerful and comprehensive tensile testing system for force measurements up to 0.5kN. With full programming capability and a...

Mecmesin max. 1 kN | MultiTest 1-i
digital force testing machine max. 1 kN | MultiTest 1-i Mecmesin

The MultiTest 1-i provides a powerful and comprehensive tensile testing system for force measurements up to 1kN. With full programming capability and a large...

Mecmesin max. 2.5 kN | MultiTest 2.5-i
vertical tensile testing machine max. 2.5 kN | MultiTest 2.5-i Mecmesin

Mecmesin’s premium range computer-controlled tensile test system The MultiTest 2.5-i provides a powerful and comprehensive...

Mecmesin max. 5 kN | MultiTest 5-i
vertical tensile testing machine max. 5 kN | MultiTest 5-i Mecmesin

The MultiTest 5-i provides a powerful and comprehensive tensile testing system for force measurements up to...

Mecmesin max. 10 kN | MultiTest 10-i
vertical tensile testing machine max. 10 kN | MultiTest 10-i Mecmesin

Mecmesin’s premium range computer-controlled tensile testing machines The MultiTest 10-i provides a powerful and comprehensive twin-column...

Mecmesin max. 25 kN | MultiTest 25-i
vertical tensile testing machine max. 25 kN | MultiTest 25-i Mecmesin

The MultiTest 25-i provides a powerful and comprehensive twin-column tensile test system for high capacity force measurements...

MTI Instruments 100 lbs, 200 lbs, 1000 lbs, 2000 lbs | MTII/Fullam
tensile/compression testing machine 100 lbs, 200 lbs, 1000 lbs, 2000 lbs | MTII/Fullam MTI Instruments

These miniature bend, fatigue, strain, compression and tensile testers are designed for use in Scanning Electron Microscopes (SEMs), Atomic Force Microscopes (AFMs) and...

NETZSCH-Gerätebau GmbH max. 5 000 µm, 1 600 °C | DIL 402 PC
horizontal pushrod dilatometer max. 5 000 µm, 1 600 °C | DIL 402 PC NETZSCH-Gerätebau GmbH

Precise expansion/shrinkage measurements in routine operation DIL 402 PC - Horizontal pushrod dilatometer The newly developed DIL 402 PC dilatometer combines easy operation, high adaptability to different...

video NETZSCH-Gerätebau GmbH max. 5 000 µm, 2 000 °C | DIL 402 C
horizontal pushrod dilatometer max. 5 000 µm, 2 000 °C | DIL 402 C NETZSCH-Gerätebau GmbH

Peak performance on thermal expansion measurements up to 2000°C When it comes to determination of the linear thermal expansion in solids, liquids, powders and pastes as well as ceramic fibers, the...

NETZSCH-Gerätebau GmbH max. 5 000 µm, 1 600 °C | DIL 402 CD
dilatometer for measurements of dimensional changes in solids max. 5 000 µm, 1 600 °C | DIL 402 CD NETZSCH-Gerätebau GmbH

Dual- and differential-dilatometer unified in a new concept DIL 402 CD - Vacuum-tight, horizontal pushrod dilatometer Are higher sample throughput, direct comparison of samples, and online calibration...

NETZSCH-Gerätebau GmbH max. 5 000 µm, 2 800 °C | DIL 402 E/7 Pyro
horizontal pushrod dilatometer max. 5 000 µm, 2 800 °C | DIL 402 E/7 Pyro NETZSCH-Gerätebau GmbH

Reliable thermal expansion measurements up to 2800°C DIL 402 E/7 Pyro - Vacuum-tight, horizontal pushrod dilatometer The DIL 402 E dilatometer can be operated to 2400°C...

NETZSCH-Gerätebau GmbH max. 5 000 µm, 1 200 °C | GST 420 PC
glaze stress tester max. 5 000 µm, 1 200 °C | GST 420 PC NETZSCH-Gerätebau GmbH

Testing glaze stress under true practical conditions Separate measurement of the expansion behavior of ceramic bodies and the glaze cannot record the effects of interactions and formation of intermediate...

new video NETZSCH-Gerätebau GmbH 24 N | DMA 242 E Artemis
dynamic mechanical analyzer (DMA) 24 N | DMA 242 E Artemis NETZSCH-Gerätebau GmbH

The Most Versatile DMA in the World DMA 242 E Artemis - Dynamic Mechanical Analyzer The new DMA 242 E Artemis combines ease of handling with the user-friendly Proteus® measurement and evaluation...

1 products Anton Paar
Anton Paar
testing machine for elastic foam Anton Paar

The foam tester allows the determination of the foaming characteristics of lubricating oils...

14 products Shimadzu Europe
Shimadzu Europe 10 kN, 1 - 20 m/s | Hydroshot HITS-P10
puncture tester 10 kN, 1 - 20 m/s | Hydroshot HITS-P10 Shimadzu Europe

With more and more requests being voiced for improved safety reliability in the automobile, electric and other industries, the evaluation of impact fracture properties of materials is becoming more...

Shimadzu Europe 10 kN, max. 20 m/s | Hydroshot HITS-T10
tensile/compression testing machine 10 kN, max. 20 m/s | Hydroshot HITS-T10 Shimadzu Europe

With more and more requests being voiced for improved safety reliability in the automobile, electric and other industries, the evaluation of the dynamic strength (vs. impact properties) of materials is...

Shimadzu Europe AG-XPLUS series
universal testing machine (UTM) AG-XPLUS series Shimadzu Europe

Short Test Cycle Time Selecting a 5 kN max. HS table-top type with a 3300 mm/min return speed and 3000 mm/min crosshead speed reduces the test cycle time for specimens that stretch, such as rubber. Short-column...

video Shimadzu Europe max. 10 kN, 1000 mm/min | AGS-X series
electromechanical universal testing machine (UTM) max. 10 kN, 1000 mm/min | AGS-X series Shimadzu Europe

Smarter work space Everything you need in a standalone tester Greater Ease-of-Operation...

Shimadzu Europe max. 5 kN, 1000 mm/min | EZ Test
electromechanical universal testing machine (UTM) max. 5 kN, 1000 mm/min | EZ Test Shimadzu Europe

NEW DESIGN The compact size fits easily on tables. Lower table height (20% lower) and larger work space This makes it easier to exchange jigs and samples and to perform a wide variety of operations. HIGH...

Shimadzu Europe max. 32000 kN | UH-X/FX series
hydraulic universal testing machine (UTM) max. 32000 kN | UH-X/FX series Shimadzu Europe

The UH-X/FX Series is a new hydraulic universal testing machine which...

8 products KERN & SOHN
KERN & SOHN 100 - 1 000 N | THM series
motorized horizontal tensile and compression test stand 100 - 1 000 N | THM series KERN & SOHN

Easy to use Efficient working Robust design and heavy duty metal construction Various possibilities...

KERN & SOHN max. 500 N | TPE series
manual tensile test stand max. 500 N | TPE series KERN & SOHN

The SAUTER test stand TPE has been developed specifically for peel testing. Typically this involves pulling a bonded material layer from a base material Safe reliable operation due to the crank As a general...

KERN & SOHN max. 500 N | TVL series
manual tensile test stand max. 500 N | TVL series KERN & SOHN

For vertical and horizontal use Precise measurement results High level of security with repeated measurements Large...

KERN & SOHN 5 000 - 30 000 N | TVM-N series
motorized vertical tensile and compression test stand 5 000 - 30 000 N | TVM-N series KERN & SOHN

Premium operation panel: - Digital speed display - Digital repeat function display Force controlled automatic switchoff (Teststop after achieving an adjusted limit load) Repeat...

KERN & SOHN 5 000 N | TVM series
materials testing machine 5 000 N | TVM series KERN & SOHN

Universal test stand to generate mechanical movement with an exceptional working width of around half a metre When used with the optional SAUTER AC 50 box supports, the test stand is then particularly...

KERN & SOHN max. 500 N | TVO
motorized vertical tensile and compression test stand max. 500 N | TVO KERN & SOHN

Motorised test stand for tension an compression tests Table-top design for...

video Bose - ElectroForce Systems Group max. 22 N | 3100
table top materials testing machine max. 22 N | 3100 Bose - ElectroForce Systems Group

Measuring less than 50.8 cm (20 inches) tall, the ElectroForce® 3100 test instrument is the smallest in the ElectroForce product family. The 3100 will fit on...

video Bose - ElectroForce Systems Group max. 225 N | 3200 series
dynamic and fatigue test system max. 225 N | 3200 series Bose - ElectroForce Systems Group

Overview The ElectroForce® 3200 Series III test instruments feature a 225 N (450 N optional) maximum force. With the versatility of static to 300 Hz frequency response, the table-top...

video Bose - ElectroForce Systems Group max. 100 Hz, ± 3 kN |3330 series
dynamic and fatigue test system max. 100 Hz, ± 3 kN |3330 series Bose - ElectroForce Systems Group

The ElectroForce® Series II 3330 test instrument is well-suited for a variety of tests that include ASTM and ISO standards tests for medical devices, materials characterization,...

video Bose - ElectroForce Systems Group 3500 series
materials testing machine 3500 series Bose - ElectroForce Systems Group

ElectroForce® 3520 instrument is rated at 7.5 kN, and the linear motor is installed in the lower baseplate....

video Bose - ElectroForce Systems Group 7.5 kN | ElectroForce® 3500 series
materials testing machine 7.5 kN | ElectroForce® 3500 series Bose - ElectroForce Systems Group

ElectroForce® 3510 instrument, rated at 7.5 kN, is configured with the linear motor installed in the upper...

video Bose - ElectroForce Systems Group
universal testing machine (UTM) Bose - ElectroForce Systems Group

TestBench configurations were designed with component testing in mind, and thanks to their modular approach, a wide array of configurations and performance capabilities...

10 products TesT GmbH
TesT GmbH max. 0.5 kN | 101
tensile/compression testing machine max. 0.5 kN | 101 TesT GmbH

With Model 101 TesT offers you a compact and lightweight one-pillar traction / compression testing machine. Due to its compact dimensions...

TesT GmbH max. 1 kN | 103
motorized vertical tensile and compression test stand max. 1 kN | 103 TesT GmbH

TesT Model 103 is a high-class testing machine for simple applications. The electric-motor-controlled, one-pillar...

TesT GmbH max. 5 kN | 105
motorized vertical tensile and compression test stand max. 5 kN | 105 TesT GmbH

Model 105 is a very robust electric-motor-driven testing machine that offers all well-proven qualities of TesT-testing machines...

TesT GmbH max. 2 kN | 106
universal testing machine (UTM) max. 2 kN | 106 TesT GmbH

Model 106 is a single-spindle machine covering a force range of up to 2 kN. The intelligent plug-in-board PC-Card 822 is...

TesT GmbH max. 0.5 kN | 110
table top materials testing machine max. 0.5 kN | 110 TesT GmbH

Model 110 has especially been designed for medical technologies, food technologies, and micromechanics or microelectronics....

TesT GmbH 5 - 100 kN | 112
universal testing machine (UTM) 5 - 100 kN | 112 TesT GmbH

Model 112 covers a measuring range of up to 100 kN and is flexibly usable for various applications. The basic structure bases on a tabletop model, but...

Shanghai Bairoe Test Instrument max. 300 kN | HUT-x00 series
computer controlled hydraulic universal testing machine (UTM) max. 300 kN | HUT-x00 series Shanghai Bairoe Test Instrument

The HUT-100/200/300 series of microchip controlled Electro-hydraulic servo universal testing machines is mainly designed for tension, compression, flexure, shear on metal, and non-metal materials. This...

Shanghai Bairoe Test Instrument 500, 600 kN | HUT-500, HUT-600
electro-hydraulic universal testing machine (UTM) 500, 600 kN | HUT-500, HUT-600 Shanghai Bairoe Test Instrument

Support for multi-language user-interface extendibility. Dynamic display of load, displacement, deformation and real-time testing curve on the screen. Closed loop control of channels such as load, displacement,...

Shanghai Bairoe Test Instrument 1000 kN | HUT-1000
computer controlled hydraulic universal testing machine (UTM) 1000 kN | HUT-1000 Shanghai Bairoe Test Instrument

The product features a firm structure as well as steady loads, precise controls and is intuitive to operate. It adopts the leading high-performance AEC-1000 Controller, which is usually equipped on high-end...

Shanghai Bairoe Test Instrument 600 kN | HUT-600B
computer controlled hydraulic universal testing machine (UTM) 600 kN | HUT-600B Shanghai Bairoe Test Instrument

The HUT-600B series of microchip controlled Electro-hydraulic servo universal testing machines is mainly designed for tension, compression, bend, shear on metal, and non-metal materials. This product...

Shanghai Bairoe Test Instrument 1000 kN | HUT-1000B
hydraulic universal testing machine (UTM) 1000 kN | HUT-1000B Shanghai Bairoe Test Instrument

Applicable to tension on metal bar, plate and threaded iron, or high speed wire rod, steel strand (related accessories required), tension on high strength, high hardness metals and compression on metals...

Shanghai Bairoe Test Instrument 2000 kN | HUT-2000B
computer controlled hydraulic universal testing machine (UTM) 2000 kN | HUT-2000B Shanghai Bairoe Test Instrument

The HUT-2000B series of microchip controlled Electro-hydraulic servo universal testing machines is mainly designed for tension, compression, bend, shear on metal, and non-metal materials. This product...

video TIME SHIJIN Group WDW-E Series (5KN - 600 KN)
materials testing machine WDW-E Series (5KN - 600 KN) TIME SHIJIN Group

Product info: Electronic universal testing machine adopts dual space door type structure, in general, tension test is executed at the upper space, compression and bending test are applied at the lower...

TIME SHIJIN Group WAW Series
hydraulic universal materials testing machine WAW Series TIME SHIJIN Group

Computer controlled servo hydraulic universal testing machine is mainly used to execute the tension, compression, bending , shearing etc. test for metal materials. Attached with simple accessories and...

TIME SHIJIN Group WDW-E Series
universal testing machine (UTM) WDW-E Series TIME SHIJIN Group

Electronic universal testing machine adopts dual space door type structure, in general, tension test is executed at the upper space, compression and bending test are applied at the lower space, the test...

TIME SHIJIN Group max. 1000 kN | WAW Series
tensile/compression testing machine max. 1000 kN | WAW Series TIME SHIJIN Group

Computer display manual hydraulic universal testing machine is mainly used to execute the tension, compression, bending , flexural etc. test...

TIME SHIJIN Group max. 2000 kN | YAW-2000D
compression testing machine for building materials max. 2000 kN | YAW-2000D TIME SHIJIN Group

YAW-2000D computer controlled servo hydraulic concrete compression testing machine is mainly used to various...

TIME SHIJIN Group max. 3000 kN | YAW Series
compression testing machine max. 3000 kN | YAW Series TIME SHIJIN Group

Computer controlled servo hydraulic concrete compression testing machine is mainly used to various materials compression test. Such as cement, concrete,...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. 500 - 1 000 N | ADL
wire harness pull test stand 500 - 1 000 N | ADL Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

ADL Terminal pull force tester is a kind of testing equipment to wiring harness and electronic industry, specifically used...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. 25 mm | AAJ
automated test stand for keyboards 25 mm | AAJ Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

Keystroke force gauge test stand is specially equipped for force gauge,...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. AMH
manual horizontal tensile and compression test stand AMH Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

AMH manual horizontal test stand adapt to domestic and imported test NLB NK, ALB etc. series pointer...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. ASC
manual vertical tensile and compression test stand ASC Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

Manually operated vertical side shaking test stand is specially outfitted with HF series and NK Series thrust meters and pull tension gauge,...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. 500 N | ASL
manual vertical tensile and compression test stand 500 N | ASL Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

Screw test stand can match the NK and HF series force gauge to make up of different use test equipment...

Wenzhou Tripod Instrument Manufacturing Co.,Ltd. AEH
motorized horizontal tensile and compression test stand AEH Wenzhou Tripod Instrument Manufacturing Co.,Ltd.

AEH electric horizontal test stand is designed for HF series and NK series force gauge of push-pull load test. This product adopts double guide bar structure, it has good stability, wide suitable scope,...

40 products Zwick
video Zwick max. 5 kN | zwicki-Line
static materials testing machine max. 5 kN | zwicki-Line Zwick

ZwickiLine is a powerful, flexible and cost-efficient testing solution for a wide range of materials and components. This...

Zwick max. 100 kN | ProLine
materials testing machine max. 100 kN | ProLine Zwick

ProLine is the ideal testing machine for function tests on components and standard tests on materials and was designed primarily for standardized...

Zwick min. 5 kN | Allround-Line series
tensile/compression testing machine min. 5 kN | Allround-Line series Zwick

AllroundLine is suitable for applications in all fields. A proven operating concept combined with flexible, modular load-frame design...

Zwick 100 - 250 kN
materials testing machine 100 - 250 kN Zwick

Single-screw testing machines are used primarily for tests which impose particularly severe demands on load-frame stiffness. Typical applications include low-cycle...

Zwick 330 - 2000 kN | E series
tensile/compression testing machine 330 - 2000 kN | E series Zwick

The electro-mechanical materials testing machines are fitted with a ball-screw drive. Available in 300, 400, 600, 1200 and 2000 kN (30 - 200 tonnes) versions. These materials testing machines feature...

Zwick 400 - 2000 kN | H series
tensile/compression testing machine 400 - 2000 kN | H series Zwick

These hydraulic materials testing machines have a single central hydraulic drive. Available in 400, 600, 1200, 1600 and 2000 kN (40 - 200 tonnes) versions. Optionally available with an adjustable top...

6 products Elcometer
Elcometer Elcometer 1720
abrasion and wear testing machine Elcometer 1720 Elcometer

These robust, reliable and extremely versatile machines have been designed for testing the abrasion, washability,...

Elcometer 60 - 72 rpm | Elcometer 5135
abrasion tester 60 - 72 rpm | Elcometer 5135 Elcometer

Used primarily in the testing of ceramics, plastics, textiles, metals, leather, rubber and painted, lacquered and electroplated surfaces, accelerated wear test procedures have also been written into many...

Elcometer 12.7 - 102 mm | Elcometer 5750
linear abrasion tester 12.7 - 102 mm | Elcometer 5750 Elcometer

Whatever your product, be it curved, round, big or small, the Linear Abraser from Taber® can test it all. Using a free floating head to follow the contours of the sample, the Taber® 5750 is the ideal...

Elcometer 40 mm | Elcometer 106
adhesion tester for paint 40 mm | Elcometer 106 Elcometer

The Elcometer 106 Adhesion Tester is easy to operate and fully portable, and provides a numerical value for adhesion. Applications include paint or plasma spray on bridge decking, coatings on steel, aluminium,...

Elcometer 150 x 100 mm | Elcometer 1500
cylindrical mandrel bending tester 150 x 100 mm | Elcometer 1500 Elcometer

The Elcometer 1500 is a simple instrument for determining the elasticity, adhesion and cracking...

Elcometer 12.7 - 101 mm | Elcometer 3025
shear/scratch tester 12.7 - 101 mm | Elcometer 3025 Elcometer

The Elcometer 3025 is a motorised device to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving. This portable instrument tests materials up to 12.7mm...

14 products BYK Gardner
BYK Gardner
abrasion tester BYK Gardner

Abrasion resistance is an important property for paint and coatings. An abrasion test is also common for tile, flooring, furniture, wall coverings,...

BYK Gardner 10 g - 12 kg
adhesion tester for paint 10 g - 12 kg BYK Gardner

Several stylus designs to optimize the test method Fast setup and...

BYK Gardner PosiTest  AT-A
adhesion tester PosiTest AT-A BYK Gardner

Built-in hydraulic pump with user selectable pull-off rate for precise results Battery operated...

BYK Gardner PosiTest  AT
adhesion tester PosiTest AT BYK Gardner

Portable instrument for in the field use Easy to read display Wide selection of dolly sizes to maximize...

BYK Gardner esp-10
impact tester esp-10 BYK Gardner

Portable design to run tests outside the laboratory Can...

BYK Gardner
coating flexibility tester BYK Gardner

Ergonomic designs to save on bench space Precision gearbox...

1 2 3 4 5 6 7
Filter by :
Related categories
Search by product
Search by manufacturer
Search by catalog
With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.