|
|
| Products 151 to 180 of 210 |
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Wastewater Treatment
* Aquaculture Aeration
|
|
Oil free-Linear Diaphragm Pump enviro series
Contamination free blowing
ET series linear diaphragm pumps provide a clean oil free air source, wich is exceptionally quiet in operation and vibration free
|
|
Oscillating Diaphragm Pumps are rated for continuous operation, self-priming, corrosion resistant, and are available in FDA grade materials. In addition, these pumps are compact, economically priced and would make an excellent alternative to Peristaltic Pumps in many applications with the ability to provide up to 4,000 hours life under normal operating conditions.
Typical applications include detergent dispensing, chemical mixing, dish and glass washers, ice machines, analytical instruments, medical and laboratory instruments, and chiller applications.
|
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
RD5 Series
Rotary diaphragm pump
An eccentrically mounted bearing on the shaft, rotates within a flexible diaphragm. As the shaft rotates, the bearing flexes the diaphragm, squeezing the liquid through the pump.
|
|
Containment Duty Non-Metallic Pumps are ideal for highly corrosive and hazardous chemical fluid requirements. All CD duty pumps are exclusively designed with:
* Containment chambers
* Hydraulically balanced/coupled pumping diaphragm and driver diaphragm assenblies
* Designed to accommodate visual, mechanical and low voltage leak detection devices
* Constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C
* Constructed of Polypropylene and PVDF with TPE (thermal plastic elastomers)
* PTFE options in diaphragms and check valves
|
|
|
Pocket bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI’s time-proven bellows technology to provide an accurate chemically-resistant metering pump with a long life, at an economical price. Pocket Bellows Pumps are available with fixed crank mechanism only.
|
|
Features
- Transfer and handle your dry process powders quicker, cleaner and at a fraction of the cost associated with installed "systems"
- Replaces Manual Powder Processes
- Reduce Airborne Contamination - With direct transfer from the powder container to your recipe
- Unique Patented Air-Induction System - Avoids the possibility of powder pack-out
- Economical and Simple - Unlike large, complex systems
- Portable - Can be moved from site to site
- Advanced Air-Induction Technology - 4-Way air efficiency valve, delay timer, pump major air valve, air induction valve, main air control valve and air motor muffler
- NPT, BSP and Tri-Clamp material connections
|
|
NOVAPLEX pumps are powerful diaphragm process pumps for a variety of applications. They are best suited for critical high pressure installations. Additionally, they can be used when the capability of classical metering pumps is exceeded.
Features of the pump
- Double diaphragm pumpheads with positive diaphragm position control
- Double diaphragm pumpheads with built-in pressure relief valve
- Crank gears with integrated lubrication system
- Crank gear bearings executed as anti-friction bearings
- Modular concept
|
|
|
|
|
|
Hygienic Diaphragms for Hygienic Diaphragm Valves
To achieve optimum diaphragm performance, only the highest-grade specially engineered materials are used in our diaphragm production. Steam cycle testing is performed on all grades of Top Line diaphragms to ensure the best possible life span of the diaphragms. Compliant and registered ISO 9001-2000 Quality Management System (QMS).
Reliability, availability and low pricing are key features that make our replacement diaphragms attractive to reducing the total cost of ownership and minimizing costly downtime. Top Line diaphragms are interchangeable with key industry manufacturers when a threaded or bayonet type connection is required.
EPDM elastomer diaphragm features:
•Proprietary low extractable steam grade material
•Superior cycle life
•FDA compliant & USP Class VI certified by NAMSA
Viton elastomer diaphragm features:
•High chemical resistance with the life cycle benefits of an elastomer
•FDA compliant material
TFM faced high pressure molded diaphragm features:
•Steam grade material
•Superior cycle life
•Better density
•Virtually non-permeable
•FDA compliant & USP Cladd VI certified by NAMSA
Certifications & Approvals
Top Line Grade 1KS & 2KS diaphragms are manufactured utilizing a proprietary unique high pressure molding technique that ensures better density and is virtually non-permeable. More importantly, this process significantly increases the cycle life of the diaphragm under harsh conditions.
|
|
RD5 Series
Rotary diaphragm pump
An eccentrically mounted bearing on the shaft, rotates within a flexible diaphragm. As the shaft rotates, the bearing flexes the diaphragm, squeezing the liquid through the pump.
|
|
Features
- Constructed of FDA Accepted Materials
- Electro-Polished 316 Stainless Steel Fluid Section
- Bolted Construction with all Stainless Steel Hardware
- All Investment Cast Wetted Parts
Typical Applications - Food processing, cosmetics, pharmaceutical, chemical additives (food grade), paint, and applications requiring quick-disconnect fluid connections
|
|
JABSCO'S PUREFLO 4-piston diaphragm pump is designed to be used in pharmaceutical, biotech, food or cosmetic applications. The design complies with the stringent requirements of these industries.
The pump and controls are mounted in a stainless steel cabinet. The system can be cleaned easily and the simple construction allows safe and easy use.
Typical Examples:
Solutions containing proteins; Suspension of cells
Bacteria, yeast, fungi, mammalian cells
Suspensions containing viruses
Filtration, chromatography
Solutions or suspensions of polymers
Feed pump for centrifuges and separators
Feed pump for filter systems
Ingredients for food and/or cosmetics
|
|
|
The Murzan PI 50 is the only diaphragm pump specifically designed to meet the special requirements of the sanitary industry. High efficiency oil free air valve, maintenance free ball check system or flap check valve and total visual inspection of all wetted parts, give the user safe and efficient transfer of foods, cosmetics and pharmaceuticals - USDA listed, FDA approved, the PI 50 Series is manufactured to meet general 3-A Standards.
|
|
|
The Murzan PO 50 is the only sanitary diaphragm pump specifically designed with the needs of the poultry industry in mind. This pump can easily handle solids up to 6" (15 cm) in diameter or 7" (17 cm) long without damaging the product; suitable for pumping necks, gizzards, livers, hearts, feet, blood, or any other application in a poultry processing plant. The Murzan PO 50 is FDA approved and USDA Meat & Poultry listed.
|
|
Features
- Self priming up to 8 vertical feet
- Can run dry without damage
- 12 VDC operation
- Built in check valve
This compact and economical pump can be used for general purpose water delivery, or will dispense on demand using the built-in 60 PSI pressure demand switch. All 8000 Series positive displacement pumps are self priming, and will run dry without damage. Designed for 12 VDC operation, this pump can be equipped with the compact Twist-on Strainer for added reliability. Pump's unique design allows for easy maintenance, unmatched reliability and trouble free performance.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
Features:
- Fully automatic
- Quiet operation
- Self priming
- Corrosion resistant
- Can run dry without damage
These boost systems include high flow 2088 Series or Power Twin Pumps with a 2 gallon stainless steel accumulator tank to deliver instantaneous water flow to remote homes and cabins.
|
|
This basic, Marathon® pump is constructed from 316L Stainless Steel. The pump offers the following benefits: material options suitable for a wide range of chemicals, simple construction for easy maintance and self-priming for emptying containers.
Product range from:
Pipe Size: .25" / 6mm
Displacement Per Stroke: .003 gal / .01 ltr
Max. Flow per Minute: 4.4 gal / 16.6 ltr
Max. Solids Handling: .079" / 2mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .94 gal / 3.56 ltr
Max. Flow per Minute: 235 gal / 889 ltr
Max. Solids Handling: .38" / 9.5mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
|
|
| ... products without technical information |
| |
|
|
Diaphragm pumps
