Needle valves, piston valves

120 companies | 362 products

Micro Valve MV 10 is specifically designed for small actuators and
provides boost in productivity and energy efficiency of Pick&Place
small parts applications. The very small size, with a...

{{productDetail[12463]}}

This series of valves uses unidirectional and bidirectional controls and has a needle type construction. This uses stainless steel bodies with 1/8, 1/4, 3/8 and 1/2...

These needle-type flow control valves act as unidirectional and bidirectional controllers. The valves are installed in any position and mounted by male thread....

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials brass - technopolymer - NBR
Mounting by male threaded
Threaded...

Construction needle - type
Valve group unidirectional and bidirectional controller
Materials body and screws M5 inox; 1/8...

Parts of the bidirectional and unidirectional valve group, these controls have a needle-type construction. The body is made of aluminum and the needle...

{{productDetail[5625]}}

This valve belongs to the MNV-1 Series. It operates at a temperature...

Panel Mount Needle Valve
Notes

K=knob
Additional...

Needle Valve, #10-32 Input Ports
Notes

K=knob
Additional...

The Clippard MNV-4 Series uses an air flow of 0-5 scfm...

{{productDetail[7116]}}

The Gauge Holder Valve from the 525 series is composed of stainless steel part,...

The 535 series has been designed with a body and gland built of carbon steel....

The 545 series is manufactured with a carbon steel body and bloom cap....

A stainless steel stem and disc are included with this...

{{productDetail[32905]}}

High fl ow due to angled seat design
Anti-waterhammer design (fl uid entry under the disc)
...

High fl ow due to angled seat design
Anti-waterhammer design (fl uid entry under the disc)
External threads...

Remote-controlled valves with disc for industrial fl uids
Anti-waterhammer design (fl uid entry under the disc)
...

{{productDetail[7472]}}

Compact needle valve in aluminium housing
Leak-free valve
Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth,...

This compact, leak-free needle valve comes in aluminum casing and is spring loaded. In addition to those features, this device is highly appropriate for use with both liquids and gases....

This leak-free, compact needle valve is made up with aluminium housing with a non-rotating stainless steel valve pin, equipped with an accurate ground flat that provides the user exact control...

This leak-free, needle valve comes in aluminum casing. It is spring loaded and features a 15-turn resolution and 56-pitch thread, resulting in smooth non-reversing flow...

Suitable for liquids and gases with a leak-free valve and compact needle valve in aluminum housing. Two M4 female...

{{productDetail[56353]}}

The piston type stop valve is screwed and socket-welded with a carbon steel...

{{productDetail[18190]}}

Low actuator thrusts are the main requirement of the sliding gate principle of this device....

{{productDetail[9316]}}

Compact miniature actuator ø 30 mm
Actuator may be rotated 360°
Suitable...

Compact miniature actuator ø 30 mm
Actuator may be rotated 360°
Suitable...

Compact miniature actuator ø 30 mm
Actuator may be rotated 360°
Suitable...

{{productDetail[15691]}}

Designed for controlling a broad range of flow rates of liquids and gases, CV™ Utility valves are available in three conveniently overlapping orifice-needle sizes. These...

The CVT™ PTFE needle valve has a simple design consisting of only seven components and one PTFE O-ring. This needle valve operates with a maximum pressure of 75 psig or 517 kPa, and at a maximum temperature...

The VT PTFE is a needle valve that consists of external components which are non-fluid and made from anodized aluminium. It is available in three overlapping flow...

The Stepping Motor Valve (SMV Series) is powered by linear stepping motor drives. It offers a resolution of 0.0005"/step and a minimal differential pressure...

VB precision barstock valves are intended for controlling low flow rates of fluids and gasses. The Mfv™ Barstock valves can be obtained in six helpfully overlapping orafice needle sizes....

{{productDetail[9050]}}

Bimba's Quik-Flo® Needle Valves are capable of managing the retraction and extension functions of a dual-acting cylinder via management of the volume of air getting into...

{{productDetail[7046]}}

The NV-55-18 Micro-Fine™ Needle Valve is constructed from the same components of the initial...

{{productDetail[11741]}}

The A 109 N needle valve is capable...

The A 130 needle valve is capable of...

{{productDetail[16432]}}

The RPB series is manufactured by FG Inox, and is a double ring fitting...

The RAMB series is available in 3 mm and 6 mm diameters. The unit features...

{{productDetail[7801]}}

The Needle valves are ideally designed for instrumentation and industrial operation purposes. They allow accurate stream flow and they have an adjustable orifice from 0 to the corresponding...

The F-2822 Series Metal Needle Valves has a fine adjustment to give accuracy in the calibration. It is intended for instrumentation and industrial requisitions.

The...

{{productDetail[7230]}}

Forged. Housing Material: 1.4571, Spindle Material: 1.4571, Spindle...

{{productDetail[14442]}}

The Gauge Isolator Valves SWS-S1 (Single Station) is a high quality product designed effectively for protection...

{{productDetail[5551]}}

With corrosion-resistant construction, Hytec's Needle Valves is ideal on circuits or components that require reduced flow rates, since they allow the fine adjustability...

{{productDetail[7653]}}
{{productDetail[14091]}}

Just like the name suggests, the m-flow micro valves have been made to provide ample regulations in situations that require small and controlled volumes of liquids or gases. They...

M-flow micro valve is a highly accurate control valve used in application requiring fine dosages of gases and liquids....

{{productDetail[17605]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation