Deep drawing presses

Force: 400 tf
Stroke: 500 mm
Working speed: 2 mm/s

... portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 ...

Force: 40 tf
Stroke: 500 mm
Working speed: 9 mm/s

... portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 ...

Force: 70 tf
Stroke: 500 mm
Working speed: 5 mm/s

... portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 ...

Force: 35 tf - 600 tf
Opening: 600 mm - 1,050 mm
Stroke: 350, 600, 450, 560, 700 mm

... machine accuracy; Machine structure: through finite element analysis, guarantee the strength and rigidity of hydraulic press; Energy saving: high power motor fulfill high speed high pressure processing requirement, ...

Force: 100 tf - 2,000 tf
Opening: 800 mm - 2,000 mm
Stroke: 1,500, 500, 1,200, 800 mm

... designed as different function requirement, ease to dis-assembly, machine problems can be checked on HMI; Performance of drawing process: changeable of ram and blank cylinders pressing force, can achieve 1 to 1 product ...

Force: 100, 36, 3, 15 kN
Opening: 200, 125, 75, 175 mm

aiPRESS servo presses are used to produce safe and reproduceable joinings. They offer optimal possibilities in customising the joining process to your needs. Process factors such as feed force, running speed, positioning time and accuracy ...

Opening: 800 mm

... capacity with plate 700 x 700 mm Hydraulic ejector 10 Tm capacity Photoelectric barrier for safe on front side Application: deep drawing for steel pieces

Force: 50 kN
Stroke: 250 mm
Table width: 450, 300 mm

This 50 ton C frame press is suitable for performing work involving deep-drawing, forming and stamping. Designed with an upper- and lower table with DIN-650 T-grooves. The upper table ...

Force: 100 tf
Stroke: 250 mm
Table width: 550, 400 mm

This 100 ton C frame press is suitable for performing work involving deep-drawing, forming and stamping. One of our best-sellers! Designed with an upper- and lower table with DIN-650 ...

Force: 100 tf
Opening: 650 mm
Stroke: 450 mm

This hydraulic C-frame press has a capacity of 100 tons with high approach- and return speeds. Suitable to carry out tasks involving deep-drawing, stamping and forming in medium and high ...

Force: 800 kN
Opening: 1,200 mm
Rate (strokes/min): 150 p/min

... provides optimal preconditions for tooling technologies in parallel operations in the fields of blanking, drawing or trimming. The modular press design makes it possible to easily implement the technical ...

Force: 1,250 kN
Rate (strokes/min): 120 p/min
Stroke: 250 mm

... and idle times can be reduced as well. Advantage in technology: Maximal tonnage available along the entire stroke range Press forces can be distributed within the die Arbitrary stroke locations and stroke heights, ...

this transfer press with strip feeder and cupping stage is built for blanking from strip, creating a cup for easier product transfer, up to 14 deep drawing stages. can be used for packaging ...

Force: 170, 60, 85, 125, 35 tf
Stroke: 500 mm
Table width: 700, 900, 800, 1,000 mm

Hydraulic c-frame press for stamping, drawing and sheet metal deformation. The MCL hydraulic press has an approach speed of the main cylinder of up to 125 mm/sec and is equipped with ...

Force: 35 tf - 340 tf
Opening: 900 mm
Stroke: 500 mm

Two-post hydraulic press suitable for cold forming and deformation of sheet metal with an approach speed of the hydraulic cylinder of up to 125 mm/sec. The MST hydraulic press is equipped with a mobile ...

Force: 120, 80, 40 tf
Stroke: 450, 550 mm
Table width: 700, 900, 600 mm

C-Frame hydraulic press designed to perform sheet metal pressing and deep cold deformation (drawing) operations with very high production cycles and with a cylinder approach speed of ...

Force: 30 tf - 250 tf
Stroke: 400, 500, 600 mm
Working speed: 10 mm/s

One of the most preferred models in deep drawing presses HSC model is open on three sides, allowing the workpiece to be easily assembled/disassembled and observed during the operation process. At the ...

Force: 400 kN - 4,000 kN
Opening: 700 mm - 1,300 mm

The structure is made in thick steel plate, welded, stress relieved and shot-blasted. The cylinders, made out of special steel, have guides of bronze and the pistons rods are case-hardened and chromium-plated. The slides are guided ...

Force: 5,000 kN
Stroke: 1,200 mm
Working speed: 1 mm/s - 10 mm/s

... human control and know-how wich is almost the case in aircraft industries. Characteristeristics Deep drawing Press type : Triple Acting Arch Press Punch Force ...

Force: 80 tf - 800 tf

... /part ejector featuring dynamic control through four travel zones Light curtains guard the front and rear openings of the press; bolt-on expanded metal guarding cover side openings Kidney loop filter/cooler circuit ...

Force: 450 tf

... 120 ton bed cushion featuring dynamic control through four travel zones Light curtains with mirrors guard the front of the press for 4-sided coverage Crown mounted power system and reservoir Kidney loop filter/cooler ...

Force: 280 tf - 280 tf

The Triform 16-10-7DD deep draw sheet hydroforming press offers a 16 inch forming space and an incredibly capable 10,000 PSI of pressure. This machine includes a 7 inch punch stroke and 12″ punch tool ...

Rate (strokes/min): 140 p/min - 220 p/min
Stroke: 8 mm - 100 mm
Table width: 425 mm - 560 mm

... round- and nonround lids and ends, but also deep drawing operations. Vacuum suckers separate the strips, while a cross feeding system with main and auxiliary feeding bars guides the strips into the ...

Force: 797.1, 2,192.1, 2,989.2, 996.4, 1,494.6 kN
Opening: 250, 300 mm

Specifically designed to perform work involving fretwork, deep-drawing, punching, bending, straightening, etc. Consist of an electro welded structure made solely of SR355JR steel. They are mechanized ...

Force: 996.4, 1,494.6, 498.2, 797.1 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined ...

Force: 498.2, 797.1, 996.4, 1,494.6 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined ...