|
|
One product example of our diaphragm pumps is Model VC0100.
Whisper silent, low power comsumption and low price are convincing arguments.
-Air flow 6l/min.
-Pressure up to 200mbar.
The airflow of the new series lies between 6 l/min up to 25 l/min, the maximum pressure is 200mbar, maximum achievable underpressure -250mbar.
Basic power supply is 230V. Special models in lower voltage (in any case AC) can be manufactured.
Please also be informed about our wide range of linear piston air compressors, vacuum pumps, liquid pumps (BIMOR), AC-pumps, quick cuplers and pneumatic tools.http://img.directindustry.com/images_di/2ai/save-En.gif
|
|
Diaphragm pump D7
Contamination free pumping
The D7 vacuum pump/compressor provides a clean oil free vacuum and pressure source. Suitable for continuous duty the D7 it ideal for use in medical and sampling applications where long term reliability is essential.
|
|
DB5 Series (Exhaust & Suction)
Silent Air Pump Built-in Type
* Extremely Quiet
* Long Life
* Low Power Consumption
* Low Vibration
* Oil-less, Contamination-free exhaust air
* C.E. Compliant and U.L. listed Models
Ideal for: Medical /Environmental /Consumer Industrial
*Air Surface/ Air Beds/ Air Mattress
*Nebulizer
*Aspirator
*Automatic/ Robotistic Equipment
*Air Sampling
*Gas Analyzer
*Ozone Generator
*Massage Chair
|
|
Air pumps APN-W series
The APN-W series are gas-liquid transfer pumps. The use of a special diaphragm allows the pump to transfer both air and liquid. The miniaturized & lightened body offers optimum sizing for various equipment such as analyzers, in which compactness is always a key requirement.
- Design for transferring both gas and liquid ensures long life.
- Ideal for waste liquid collection thanks to the ability to handle entrained gas.
- Ultra-compact and lightweight
- High corrosion resistance
- Low noise design
- Oil-free design
- Capable of self-priming under dry condition.
|
|
Ideal for:
Fish breeding equipment (oxygen supply)
Air mat (Continous air exhaust)
Air bearing
Burner (air supply)
Scientific and Chemical instruments (Analysis and agitation)
C Series Product features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
*Custom OEM Models
*Thermal Protection
*Aerobic Wastewater Treatment
*Aquaculture Aeration
|
|
Double diaphragm pumps, thanks to their technical characteristics, guarantee the greatest level of safety in all industrial applications where the use of compressed air driven pumps is required in the presence of particularly aggressive fluids.
These pumps may be used in explosive environments (ATEX), in situations characterized by high humidity and where the hazards of dry operation are high.
The pumps function using two membranes that simultaneously operate in opposition to each other: the air introduced behind the first membrane pushes the product being pumped towards the discharge and, simultaneously, through the force of the shaft, it drags the other membrane resulting in suction in the suction line. The two Long-Life membranes, which work alternatively in two directions, allow an extremely long duration even when subjected to particularly severe working conditions.
|
|
|
|
|
|
The CUBIC diaphragm pumps are known for their high performance, power and sturdiness that make them suitable for pumping fluid with a very high apparent viscosity, of up to 50.000 cps (at 20° C) even when suspended solid parts are present. The dry suction capacity from considerable suction heights when the pump is not flooded, together with the possibility to fine-tune the speed without a loss in pressure, flow rate and head, and the possibility of loadless operation without causing any damage, make these pumps extremely versatile. The vast choice of composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without neglecting the temperature aspect. Their construction makes them particularly suitable for severe environments with high humidity or in potentially explosive environments (ATEX certification).
Main features:
- executions in: Polypropylene, PVDF/ECTFE
- use in explosive atmospheres (ATEX certification);
- suitable for severe environments and with high humidity;
- dry operation;
- dry self-priming;
- supply with non-lubricated air;
- adjustable flow rate and head;
- fine-tuning of the speed at constant pressure;
- possibility of twin manifolds (two separate intakes and deliveries);
- bench or ceiling installation;
- three delivery and intake positions
- ease of maintenance and replacement of parts;
- very good performance/cost ratio.
|
|
A favorite among Process Professionals, the Expert Series diaphragm pump line features the best total cost of ownership of any diaphragm pump on the market. These pumps provide optimum energy efficiency and downtime solutions. A large range of material and porting configurations are available with flow rates up to 1041 l/min.
For stall-free, ice-free operation. The patented “Unstallable” unbalanced air valve design avoids stalling issues associated with other pumps. The “Quick-Dump” exhaust valves divert cold exhaust air from ice-prone components, preventing freezing. This is the most reliable pump line on the market today.
|
|
|
|
|
|
Verderair double diaphragm pumps
Series Verderair VA and Almatec
These balanced series of compressed air driven, double diaphragm pumps consists of two series: Verderair VA all purpose, multi-functional diaphragm pumps and Almatec diaphragm pumps for advanced/difficult applications. Both non metallic and metallic versions are available.
Advantages and characteristics
- Simple installation
- Maintenance friendly
- Easy to operate
- Self-priming when dry
- No air lubrication needed
- Sanitary, Ultra-pure and high pressure versions
Models
VA
These pumps provide flexible, reliable flow in all circumstances. The control valve guarantees perfect operation that never jams and that does not have to be lubricated even at low compressed air pressure and high backpressure.
Capacity max: 1050 l/min., lift max.: 84 kPa.
Ball valves
The Verderair VA models are equipped with ball valves. They ensure that the pressure drop is low during circulation, resulting in a higher circulation than can be achieved with cylindrical valves. Also small particles pumpable.
|
|
ATEX Directive 94/9/EC
As a marketleading producer of air-operated, double-diaphragm pumps worldwide, its is natural for us to comply with the ATEX 100A directive for explosive atmospheres.
Albin Pump AB designs, develops and manufactures pumps, pump parts and peripheral accessories. Albin Pump is consistently striving to meet and exceed the tradition of service, quality and integrity by providing the market with the latest certifications to meet our customers needs. Albin Pump´s employees and its Distributor network are deeply committed to excellence, innovation and customer service.
|
|
Pumps for the printing and paper industry have to meet definite requirements. The pneumatic diaphragm pumps of the ALMATEC F-Series have been developed especially for applications with glues, flexo-print inks, and UV-varnishes.
ALMATEC pneumatic diaphragm pumps of the F-Series are available in two sizes (F 10 and F 20) with max. capacities of 600 resp. 1200 l/h.
The special design includes two separated liquid chambers as well as an integrated pulsation damper, so the pumps provide delivery as well as re-delivery. No second pump is required.
Example flexo-print ink: Ink is transported to the printing machine via the delivery chamber. The second chamber of the pump can be used as an extractor pump. Ink not needed can be sucked from the doctor chamber back to the supply container.
F-Series pumps meet the ATEX requirements of the directive 94/9/EG.
|
|
STANDARD FEATURES
Pumps are ruggedly constructed to withstand the rigors of the pressroom. The inlets and outlets can be configured to meet the requirements of bottom printing corrugated lines or the top decks of the largest CI presses. A variety of corrosion resistant constructed materials permits use with water, alcohol, and solvent-based inks and coatings.
Pump is designed for easy maintenance with a minimal amount of parts.
For situations requiring controlled flow rates from 40 gallons per minute down to a trickle.
Air operation is inherently explosion proof.
Self-priming with the ability to pump liquids containing small solids.
Optional air-powered mixer is available for in-tank agitation.
|
|
ALMATEC pneumatic diaphragm pumps of type AD 6 are a special development for laboratory applications and for sampling water from wells for continuous monitoring of the groundwater under landfills.
They have a maximum delivery volume of 250 l/h which can be infinitely varied by adjusting the air flow. AD 6 pumps are equipped with spring-loaded valves and can therefore be installed in any position.
The housing is made of solid PTFE conductive. This material is resistant to corrosion by virtually all media. Its conductivity permits use of the pump in explosion-hazard areas and for inflammable liquids.
AD 6 pumps meet the ATEX requirements of the directive 94/9/EG.
|
|
Since 1984 ALMATEC manufactures special pumps for the chemicals supply and circulation in the semiconductor industry. The latest generation is the FUTUR, a pump series particularly developed for the special requirements of these applications.
The liquids handled in the semiconductor industry set different demands to the pumps. Therefore the FUTUR series is available in four materials:
4 sizes made of PTFE/UPPE for acids and caustics up to 130°C (model FUTUR T)
2 sizes made of PTFE for hot applications with acids and caustics up to 200°C
(model FUTUR H)
4 sizes made of UPPE for slurries
(model FUTUR E)
2 sizes made of stainless steel (SS 316 L) for solvents (model FUTUR S)
|
|
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
|
Always the right solution for the safe and reliable transfer of low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aereated liquids.
|
|
The ProMinent® Duodos pumps are air operated diaphragm pumps. Since they are pneumatically operated the pumps require no electric components. The pump is dry-proof and self-priming. The pump feed rate can be adjusted by changing the pressure in the air supply. The pumps feed up to approx. 6 700 l/h media to a feed lift of 70 m.
Advantage
* Self-priming
* Dry-proof
* High Suction capacity
* No electric components
* No pressure relief valves required
Application Areas
Feed of abrasive, viscous, highly sensitive and gaseous media.
|
|
Features
- 2 chamber dual diaphragm
- Positive displacement
- On demand operation
- Chemical resistant polypropylene body
- 30 to 60 PSI (2.1 - 4.1 bar)
SHURflo's 166 Air Operated Demand Pumps employ a dual diaphragm design, with a patented fast action switching mechanism allowing for consistent flow and pressure. They are built for the toughest pumping applications and are available in a variety of elastomers that allow them to be compatible with mild caustic or acidic fluids. Ideal for chemical transfer, injection and spraying.
|
|
|
|
|
|
JESSBERGER air operated diaphragm pumps are suitable for nearly all applications. They can also pump media with high viscosities - also with particles or at abrasiveness.
Pumps can be supplied in Polypropylene, PVDF, Aluminium or Stainless steel. Manufactured sizes are available from 1/4" (5 l/min) up to 3" (850 l/min; both at 7 bar operating pressure.)
The advantages of an air operated diaphragm pump are:
- Can be used with non-lubricated air
- Also suitable for very humid environments
- Can be used in hazardous areas or for flammable media
- Also suitable for very aggressive or viscous media
- Flow rate and delivery head can be adjusted over air pressure
- After manifolds have been splitted two media can be pumped
- Different connections at suction and discharge side
- Dry running possible
- No electrical connection neccessary
- Dry self priming
- Easy change of spare parts and simple maintenance
The products of this manufacturer have a very good cost/ performance ratio. The pumps have standed the test of time since many years in nearly all industries worldwide.
|
|
Automotive Cleaning and Recycling;Chemical Transfer and dispensing;Bag-In-Box chemicalsParts Washers ;Car Wash Systems;
Features:
• Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
• Robust Design with durable integral mounting
• Patented Shuttle Valve, eliminates stalling
• Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
• Corrosion Resistant materials capable of handling a wide range of chemicals
• Sanitary design with insert molded diaphragm (Santroprene only)
• Leak Resistant radial seals, no critical o-ring sealsQuiet Operation with large exhaust muffler
• Ease of Installation with all quick disconnect ports
|
|
Macro Dia-Vac® gaseous diaphragm sampling pumps are completely self contained and may be used for either built-in or portable applications. These economical oil-free, contamination-free and leak-free Dia-Vac® pumps offer up to 13 SLPM, 23 InHg, and 29 PSIG in a single head configuration. Macro Dia-Vac® pumps are exceptionally quiet and are available with Aluminum or Teflon-coated Aluminum wetted parts. They are an ideal choice for OEM customers.
Single Head Macro Diaphragm Pump (J161-BF-AA1 shown here)
|
|
|
Welcome to the newest Line of rugged Dia-Vac® Pumps! The High Performance double head Dia-Vac® pump will provide greater response in the most demanding applications!!! These durable pumps are available with General purpose, TEFC, Air Driven, Explosion proof UL/CSA Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts are available with aluminum or 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 0-84 LPM, 0-60 PSIG. You can count on the new high performance Dia-Vac to pass you gas with confidence!!
|
|
The double diaphragm system increases safety when sampling expensive or extremely hazardous gases. Should the primary diaphragm fail, the other diaphragm keeps the sample flow intact. The 1/8" NPT port connection allows the user to add a leak detection system and alarm. The detection system monitors the diaphragm for failure analysis and assures system integrity until maintenance can be performed.
Single Head Double Diaphragm Sampling Pump (R221-FT-AA1-D shown here)
|
|
The Micro Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. Maximum performance range: 0-13 LPM, 0-28”Hg, and 0-30 PSIG.
Double Head Diaphragm Sampling Pump (B162-FP-AA1 shown here)
|
|
| ... products without technical information |
| |
|
|
