|
|
The New Telescopic Platform H28 TJ+ (HB86 TJ+)
Haulotte Group, the global manufacturer specializing in equipment that lifts people and material lifting equipment, has used its expertise to respond to customer needs with the launch of the innovative Telescopic Big Boom H28 TJ+ (HB86 TJ+)
Innovation
Additional ‘flexibility’
The new Big Boom H28 TJ+ (HB86 TJ+) has a telescopic jib which offers a 5 m additional reach (16 ft 5 in) to work in the most challenging working environments
A significant increase in productivity
In every respect, the new big boom H28 TJ+ (HB86TJ+) makes your work easier and allows you to operate in a wider range of working environments
+ With an outreach of 23 m (75 ft 6 in)
+ With simultaneous movements
+ With an 2.44 m platform (8 ft)
+ With the capacity to lift rapidly heavy loads (Up to 350 kg – 772 lb).
+ With a 5 m (16 ft 5 in) telescopic jib with proportional controls that allows to reach the most inaccessible worksites. |
|
Haulotte, N° 1 in Europe and one of the worldwide leading manufacturers
The HAULOTTE articulating booms offer :
- from 12 to 41 m working height
- an important outreach (up to 21m)
- a maximum platform capacity (up to 250 kg)
|
|
Haulotte, N° 1 in Europe and one of the worldwide leading manufacturers
The HAULOTTE telescopic booms offer :
- from 14 to 43 m working height
- a maximum platform capacity (up to 360 kg)
- an important outreach (up to 20m)
|
|
| Excellent manoeuvrability on the road thanks to its compactness and balanced weights. Extremely short length and reduced height in road position. Compact boom with hexagonal sections made of highly resistant steel offering excellent stability and comfort. Entirely proportional movements with slowing-down at end-of-travel position for greater precision and safety. Possibility to carry out three movements simultaneously: lifting, boom and turret rotation. All movements can be performed from the top and bottom control stations. Robust and ergonomically designed access and work-stations. Easy-to-change double-access platform. Safety system to avoid any interference between boom and booth. Double sensors for enhanced safety. Trunk ways and chains inside the arm for protection from outside damage. |
|
The HAULOTTE vertical masts offer :
- from 6 to 12 m working height
- maximum compactness and handiness
- a high autonomy (powerful batteries)
|
|
Niftylift's self drive platforms have working heights of up to 20.70m (68ft) and 21m (69ft). Combining the capabilities of trailer mounts and self propelled booms they are compact, lightweight and manoeuvrable. Driven from the platform while stowed, 4WD chassis options maximise traction and hydraulic outriggers allow fast setup even on rough terrain. Easy to use proportional controls make operation simple and features such as telescopic booms, fly-booms/jibs and cage rotation maximise their effectiveness on any task.
Power options available include battery, petrol/gas, diesel and Bi-Energy (e.g. battery & diesel), combining the benefits of two power sources on the same machine.*
All are built to meet safety standards including CE, EN280, OSHA & ANSI and are backed up by a dedicated team who are always on call to help with spare parts, service, maintenance or repair work.
Niftylift offers free maintenance training to customers and as an IPAF (International Powered Access Federation) training school offers courses for operators and demonstrators.
* Not available on all models, check specification sheets for details of exact features. |
|
- Electrical drive and arm motions with proportional control.
- Parking brakes with hydraulic disengagement.
- Mechanical wheel drive disengagement for emergency hauling.
- Cushion non-marking tyres 530 x 175 mm.
- 355° turret rotation.
- Horn, hourmeter and flashing beacon.
- Battery charger with automatic switch-off 48 V - 45 A.
- Traction battery 8 x 6 V - 390 Ah (C5.).
- Battery control system with low-voltage cut-out protection.
- Manual emergency lowering device.
- Loading sensor on basket.
- Cylinders holding valves.
- Hydraulic basket rotation.
- Hydraulic basket levelling.
- Batteries centralized water feeder with level indicator.
- Inclinometer with motion blocking device and alarms.
- Double controls from basket and ground.
- Pothole protection.
- Battery cut-out plug.
- Overload sensor.
- CE - EN 280 marking. |
|
| Articulating Boom Lifts with their up-and-over configuration, are the most versatile boom lifts in the JLG product range. Ideal for reaching up and over machinery, equipment, and other obstacles mounted on floors, or for reaching other elevated positions not easily approached by a straight boom lift. The machine’s turntable may be rotated 360 degrees; the upper boom can be raised or lowered from almost vertical to below horizontal, and extended (telescoped) while the work platform remains level. All articulating models are driveable at full elevation, subject to satisfactory ground conditions, and some models have narrow chassis widths to help provide access to confined work areas. JLG offers 11 diesel powered articulating boom lift models, ranging from 15.5 m to 47.5 m working height. |
|
| JLG’s range of telescopic (straight) boom lifts are especially useful for applications that require high reach capability. JLG’s Boom Lifts are designed and manufactured with strong and rigid booms to provide improved operator comfort. For greater manoeuvrability, gradeability and mobility, JLG’s boom lifts offer options that include four wheel drive, oscillating axle and four wheel steer. The platform control layout is common across the range, making it easier for trained operators to move from one model to another with the need for extensive re-training. Fully proportional drive and lift for a smoother ride and JLG’s control ADE (Advanced Design Electronic) System that provides improved fuel economy with diagnostic capability to help reduce time spent on service and maintenance are just some of the many features. |
|
Throughout the world you will see JLG electric boom lifts used in warehouses, factories and shopping malls, as well as in outdoor locations. They are designed and engineered for reaching up and over machinery, equipment and other obstacles mounted on floors and for reaching other elevated positions.
All models can be driven up to full elevation. Narrow chassis models enable easy access to narrow aisles and congested work areas. With automatic traction control (ATC), they perform smoothly over uneven surfaces or obstacles and non-marking tyres that are standard on narrow models are perfect for indoor use. On the E600 series, an optional oscillating axle and all-wheel drive improves ground contact and terrain performance. |
|
HR21 / SP64
20.70m (68ft)
Working height
12.63m (41ft 5in)
Unrestricted working outreach at 225kg
30% Gradeability - 2x4
45% Gradeability - 4x4
4WD for rough terrain
Superb Manoeuvrability
4m outside turning radius
Unique Suspension System
Improving traction & comfort
Swing-Out Engine Tray
Quick & easy to service
Platform Rotation & Flyboom
Improved access to applications
|
|
HR18 4x4 / SP53 4x4
18m (59ft 1in)
Working height
10m (32ft 4in)
Unrestricted working outreach with 300kg SWL
50% Gradeability
4WD for rough terrain
Weight Only 6,300kg
Construction site friendly
5.5kVA Generator Available
Self-contained 110V supply
Swing-Out Engine Tray
Quick & easy to service
Extra-Large Platform
More room to work and carry tools & equipment
|
|
| JLG’s vertical personnel lifts are the smallest aerial work platforms in the entire range. Provided to meet the needs of applications where space is limited and the floor load is restricted. The lifts are designed to have a minimum footprint area and can be set up quickly so there is little delay for you to start on the task ahead. The personnel lifts consist of a work platform attached to an aluminum mast that extends vertically. Platforms vary in size and capacity but all carry one person (some models carry two) with optional attachments to carry tools and materials with ease. There are three types of vertical personnel lifts available: push around vertical lifts, self-propelled vertical lifts, and self-propelled stock picker vertical lifts. |
|
Niftylift’s track drive platforms have working heights of 9m (30ft), 12m (40ft) & 17m (50ft). Combining the capabilities of trailer mounts and self propelled booms they are compact, lightweight and manoeuvrable. Driven from the platform while stowed they offer maximum traction on steep gradients and hydraulic outriggers allow fast setup even on rough terrain. Easy to use proportional controls make operation simple and features such as telescopic booms, fly-booms/jibs and cage rotation maximise their effectiveness on any task.
Power options available include battery, petrol/gas, diesel and ‘Bi-Energy’ (e.g. battery & diesel), combining the benefits of two power sources on the same machine.*
All are built to meet safety standards including CE, EN280, OSHA & ANSI and are backed up by a dedicated team who are always on call to help with spare parts, service, maintenance or repair work.
Niftylift offers free maintenance training to customers and as an IPAF (International Powered Access Federation) training school offers courses for operators and demonstrators.
* Not available on all models, check specification sheets for details of exact features. |
|
17.10m (56ft 1in)
Working height
8.70m (28ft 7in)
Working outreach
Superb Gradeability
Will climb very steep inclines as steep as 32% (180)
Excellent Traction
Better grip on uneven terrain
Weight Saving Design
Lower cost transportation & better fuel economy on site
Non-Marking Tracks
Optional rubber-free tracks available for indoor usage
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain |
|
| Steady and reliable platform Proportional controls Easy towing speed rate A unique design of the stabilizer’s system allowing its use on rough grounds |
|
Niftylift’s vehicle mounts are available with working heights ranging from 10m (30ft) to over 16m (50ft) and can be mounted on a number of different vehicles according to customer requirements. Booms are designed to be as light as possible without compromising on performance or strength and offer excellent working envelopes for their size.
Power options available include PTO (power take off) with battery or ‘donkey’ engine backup.*
All are built to meet safety standards including CE, EN280, OSHA & ANSI and are backed up by a dedicated team who are always on call to help with spare parts, service, maintenance or repair work.
Niftylift offers free maintenance training to customers and as an IPAF (International Powered Access Federation) training school offers courses for operators and demonstrators.
* Not available on all models, check specification sheets for details of exact features. |
|
| JLG’s vertical personnel lifts are the smallest aerial work platforms in the entire range. Provided to meet the needs of applications where space is limited and the floor load is restricted. The lifts are designed to have a minimum footprint area and can be set up quickly so there is little delay for you to start on the task ahead. The personnel lifts consist of a work platform attached to an aluminum mast that extends vertically. Platforms vary in size and capacity but all carry one person (some models carry two) with optional attachments to carry tools and materials with ease. There are three types of vertical personnel lifts available: push around vertical lifts, self-propelled vertical lifts, and self-propelled stock picker vertical lifts. |
|
17.10m (56ft 1in)
Working height
8.70m (28ft 7in)
Working outreach
Weight Saving Design
Easily transported & manoeuvred on site
Telescopic Upper Boom
Greater accuracy when positioning the platform
Bi-Energy Available
Optimises utilisation
Hydraulic Outriggers
Quick & easy to set up
Fully Proportional Hydraulic Controls
Quick & easy to service
Platform Rotation
Better access to applications |
|
Genie Z-45/25 & Z-45/25JDC Bi-Energy Booms
With an extended reach, models with jibs, and a variety of outstanding performance features, the Z-45/25 DC/Bi-Energy handles the most challenging high-reach jobs. The revolutionary Genie Bi-Energy system combines the quiet, emission-free and efficient operation of a 48V DC machine with the versatility of a diesel generator powered machine to provide a boom that is ideal for indoor and outdoor applications.
Quick and Maneuverable
The Z-45/25’s enhanced design helps get you where you need to go, quickly and easily. The new 6 ft (1.83 m) inside turning radius delivers excellent maneuverability. Z-45/25J models with a 6 ft (1.83 m) articulating jib boom are also available to provide a 139° range of motion.
Unsurpassed Speed and Gradeability
This 2WD is the fastest boom in its class. Travels 3 mph (4.8 km/h) with 30% gradeability.
Dual Parallelogram Riser
Advanced design allows ascent and descent along a vertical plane with or without retraction or extension of the boom.
Large Platform with Hydraulic Rotation
The standard 6 ft (1.83 m) all-steel platform lifts up to 500 lb (227 kg). Dimensions of 30 x 72 in (76 cm x 1.83 m) allow ample space for two workers and their tools. Platform features a 180° hydraulic rotation for Z-45/25 models and a 160° hydraulic rotation for Z-45/25J models. Also includes automatic platform leveling with a manual hydraulic override system and an AC power outlet.
Ground Controls
Located at eye level with easy to understand controls and including auxiliary power, key switch, emergency stop, hour meter and all boom functions.
Safety in Sight
All instructional and safety decals are straightforward and conveniently located to be clearly visible.
Drive Enable System
Informs operator when the drive and steer functions will move opposite controller movements.
Standard Features:
51 ft 8 in (15.92 m) working height
25 ft 1 in (7.65 m) horizontal reach
Up and over clearance of over 22 ft 1 in (6.73 m)
6 ft (1.83 m) turning radius
500 lb (227 kg) lift capacity
Fully proportional controls
180° hydraulic platform rotation on Z-45/25 models
160° hydraulic platform rotation on Z-45/25J models
24V DC auxiliary power unit
Drive enable system
End mount platform on Z-45/25J models
AC wiring to platform
Tilt alarm
Horn
Hour meter
Standards Compliance:
ANSI/SIA A92.5
CSA B354.4
CE compliance
AS 1418.10
PB-10-611-03 |
|
* AB38N Boom Lift :
The tried and tested UpRight AB38 is one of the best self-propelled booms in its class. Tough, durable and reliable, its up-and-over articulated boom design provides the operator with a fantastic versatile working envelope. Smooth, one-hand proportional joystick control gives superb reach and precision in the air, while the slim 1.5metre-wide chassis, 40cm inside turning radius and 36% gradeability delivers greater manoeuvrability and accessibility in narrow aisles.
* AB38W Boom Lift :
This special wide version of the much-loved AB38 has all its great features but is much easier to transport. Its lighter weight also makes it perfect for internal use where floor weight is an issue. The reduction in weight has not affected this electric boom lift�s superb performance, with a working height of up to 13.5 metres and up to 6.1 metres of outreach. The smooth proportional controls, compact chassis and excellent turning circle, make the UpRight AB38W a leader in its class.
* AB46 Self Propelled Boom Lift :
Available in 2WD or 4WD rough terrain, the AB46 is a versatile boom lift capable of working to heights up to 16.1m. With a working outreach of 7.5m and a jib length of 1.5m, this self propelled boom is a class leader and ideal for use in area with a small working envelope as the inside turning radius is only 0.6m! |
|
Genie DPL™ Super Series™
The Genie DPL™ Super Series™ delivers savings of up to 50% or more over scissor lifts or booms. Besides its lower cost, the DPL Super Series provides tight-access maneuverability, easily handling jobs that many self-propelled products can't access. One-person setup and operation allows versatile use by one or two people. The large platform has ample space for workers and their tools.
Standard Features:
Designed to fit through a single door
AC or DC power options
Auxiliary platform lowering feature
Tie-down attachment points on each corner
Swivel-lock casters
Angled entry ladder
Ground and platform controls
Locking key switch
Standards Compliance:
ANSI/SIA A92.3
CSA CAN3-B354.1
CE compliance
AS 1418.10
PB-10-611-03 |
|
| The largest in the UpRight boom range, the SB126J really is the ultimate in booms. Taking you up to a 40m working height, the SB126J ensures you achieve the toughest of jobs. With a 19.2m outreach and a 1.2m, 140°jib for maximum versatility. The diesel powered, 4 wheel drive and steer machine also has a fixed front, extendable rear axle. |
|
Skyjack's world class product designs provide the best possible value and lowest life cycle costs through unsurpassed reliability and ease of service. The new SJ 40T and SJ 45T boom lifts make no exception to these philosophies, offering innovative design features such as an analog based control system and relay based electrical system.
Anyone familiar with Skyjack's world class Rough Terrain scissor lifts will recognize the axle based 4WD system. There are no wheel motors or torque hubs, and as a result there are no hydraulic hoses left unprotected from job site hazards and the number of potential hydraulic leak sites are reduced. The axle based 4WD system offers unsurpassed traction and terrainability; using a 'Detroit Locker' type differential on the rear axle and limited slip differential (sometimes referred to as Posi-trac) on the front oscillating axle, ensures the least amount of power loss when one or more of the wheels lose traction.
Skyjack's hallmark control and electrical systems, together with an axle based 4WD system, are only a few examples of how Skyjack keeps serviceability and life cycle costs in mind. These models are also packed full of innovative, service friendly features, such as the unique central grease points at the rear of the turret for quick and easy maintenance, as well as easy to adjust (and lock) rotation deflection adjustment located inside the engine side cabinet. The SJ 40T and SJ45T also feature Skyjack's exclusive DIRECTION SENSING controls, which ensure the boom lift will always drive and steer with respect to the operator rather than the orientation of the base. |
|
HR15N / SP45N
15.60m (51ft 2in)
Working height
9.60m (31ft 6in)
Working Outreach
1.50m Narrow Chassis
Allows operation in confined areas
Bi-Energy Available
Optimising utilisation
225kg SWL
Extra capacity for tools and materials
Telescopic Upper Boom
Greater accuracy when positioning platform
Platform Rotation & Flyboom
Improving manoeuvrability on site
|
|
HR17 4x4 / SP50 4x4
17.20m (56ft 5in)
Working height
9.60m (31ft 6in)
Working Outreach
45% Gradeability
4WD for rough terrain
Suspension System
Improved traction on uneven terrain
2.00m Chassis Width
Operation in confined areas
Fully Proportional Hydraulic Controls
Simple, reliable & easy to use
1.80m Wide Platform
Improving operator comfort
Platform Rotation & Flyboom
Improved access to applications
|
|
HR12 / SP34
12.20m (40ft)
Working height
6.10m (20ft)
Working outreach
Telescopic Upper Boom
Greater accuracy when positioning platform
1.50m Chassis - HR12N / SP34N
Improved narrow aisle access
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
Bi-Energy Available
Optimising Utilisation
Slide-Out Canopy - HR12 4x4 / SP34 4x4
Faster, easier access to engine
|
|
HR17N / SP50N
17.20m (56ft 5in)
Working height
9.90m (32ft 6in)
Working Outreach
1.50m Narrow Chassis
Allows operation in confined areas
Bi-Energy Available
Optimising utilisation
225kg SWL
Extra capacity for tools and materials
Telescopic Upper Boom
Greater accuracy when positioning platform
Platform Rotation & Flyboom
Improving manoeuvrability on site
|
|
|