- Hydraulics - Pneumatics >
- Valve >
- Stainless steel valve
Stainless steel valves
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 15, 20 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C
... -way ball valve with male thread Producer Medium: Compressed air, vacuum, inert gases Material of casing: Brass nickel-plated Material of nut: Brass nickel-plated Material of seal: NBR Material of locking ...
DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C
2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material ...
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
... elements with stainless steel sinus springs Long heat-insulating shaft Switch shaft made of stainless steel High degree of resilience against pipework ...
KLINGER
DN: 350 mm - 1,200 mm
Pressure: 10, 16 bar
... 304 Stainless steel bolts - 250μm epoxy coating Bi-directional sealing The backlash-free shaft is connected to the disc. It is never in contact with the fluid, protecting it from corrosion. Built-in ...
TECOFI
DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa
Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 ...
DN: 3 mm
Pressure: 0 bar - 200 bar
Stainless steel Control- and shut-off valves (e.g. for the pressure regulator outlet) For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable ...
DN: 0.25 in - 3 in
Pressure: 41.4 bar
... Electric Motor Valves are used in commercial HVAC zone control and light industrial applications. It consists of a bronze body construction, vented stainless steel ball, standard position ...
DN: 0.25 in - 4 in
Pressure: 20, 10, 40, 30, 25 bar
Temperature: -10 °C - 120 °C
... according to the matenals list authorized by the 4 MS • - Full bore • - Anti blow-out stem • - Large fiat sealing face • - Stainless Steel bail from DN3/4* to 4" • - PTFE packing • ...
SFERACO
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
Pressure: 530, 630 bar
All parts of 316L steel and counter flanges of X2CrNiMoN22-5-3 1.4462 (DUPLEX) material are used in this valve. Due to the occurrence of working pressures of 530 bar, the valves were ...
DN: 0.5 in
Pressure: 320 bar
Temperature: -196 °C - 400 °C
... valves are made of stainless steel and the acid-resistant valves are made of acid-resistant steel, with the exception of the tempered stainless steel ...
Pressure: 16, 25 bar
Temperature: -196 °C - 400 °C
... the steel version, the body seat welded with acid-resistant electrode increases the durability of the valve. The pin with plug is made of tempered stainless steel. Corrosion-prone ...
DN: 1 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 150 °C
... sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -60 °C - 400 °C
... V303 is a series of single seated, three-way globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be ...
VALSTEAM ADCA Engineering S.A.
DN: 0.5 in - 2 in
Pressure: 0 bar - 13 bar
Temperature: 0 °C - 170 °C
The ADCAPure V926A is a series of single seated two-way aseptic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable ...
VALSTEAM ADCA Engineering S.A.
... flapper. The surface of the site is made of hard chromium or AISI 316 stainless steel welded filling, so the surface of the site is resistant to abrasion and corrosion. Our butterfly valves ...
DN: 65 mm - 150 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 55 °C
system ball valve, solid version space-saving wafer flange version with high-quality stainless steel bushes modular upgrading of connection possible up to flange version in DIN face-to-face ...
DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C
... way body (DN 10–32) – Y-pattern body (DN 50) – quick-acting design with electric actuator Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ...
ARAKO spol. s r.o
DN: 10 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: 250 °C
... Design options: – Z-form body – Y-pattern body – quick-acting design with electric actuator Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ...
ARAKO spol. s r.o
DN: 6 mm - 12 mm
Pressure: 40, 50, 45 bar
Temperature: 60 °C
... for control of quick-acting valves – design including or without regulating valve – suitable for single or double acting operating – meets all tests for use in nuclear energetics – medium – air Material stainless ...
ARAKO spol. s r.o
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...
Ralston
Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated
Ralston
Pressure: 200, 350 bar
Temperature: -18 °C - 105 °C
... process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system. * Use whenever ...
Ralston
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
DN: 1, 2 in
Pressure: 8 bar
... The CELTIC N is build totally in stainless steel and the diaphragm in FEP result in compatibility with practically all blanketig processes. Materials: Body: Stainless Steel ...
DN: 10 mm
Pressure: 4 bar
Temperature: 48 °C
Front control valve in stainless steel, inlet and outlet SS tube 10x1mm, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum ...
Pressure: 4 bar
Front control valve in stainless steel, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum ...
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... without drain port (drain valve cannot be added) spindle thread not in contact with medium wear-resistant stainless steel valve seat with a black handwheel ...
Kemper Olpe GmbH
DN: 15, 20, 25, 32 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... opened indication of pre-setting on bracket without drain port (drain valve cannot be added) Open position indicator wear-resistant stainless steel valve ...
Kemper Olpe GmbH
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP · NPT · BW · SW ISO-5211 mounting pad to mount directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO ...
ACMO S.p.A.
DN: 150 mm - 610 mm
Temperature: 80 °C
... Flange Options Standard flange Custom flanges are available Material Contact Options Carbon steel, 304 stainless steel, 235 BHN abrasion-resistant steel, SAE 660 bronze
DN: 50 mm - 255 mm
Temperature: 80 °C
... Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 stainless steel Position ...
DN: 100 mm - 455 mm
... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control over flow rates. ...
DN: 8 mm - 50 mm
Pressure: 50 bar - 63 bar
Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Socket weld rotating - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...
DN: 40 mm
Pressure: 50 bar - 63 bar
Temperature: -50 °C - 185 °C
Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Thread BSPP ISO 228-1 - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...
DN: 0.5 in - 1 in
Pressure: 6 bar
Temperature: 180 °C
Model: - Straight adjustable - Material body: - Stainless steel 1.4408 / CF8M Connection: - Thread BSPP ISO 228 - Material seats: - FKM / PTFE Including: - Pressure gauge Note: - Clean steam Pressure ...
DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
... Pressure 2.5 to 8 bar (Based on 5.5 bar air supply as standard) Body Aluminum alloy Ambient Temp -15 to 8 oC (Low and high temp versions also available) 0 Springs Stainless Steel Cycle ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C
... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...
pneumaticairactuator.com
DN: 0.5 in - 40 in
... Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast ...
China MED Valve Co., Ltd.
DN: 0.5 in - 40 in
Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ...
China MED Valve Co., Ltd.
DN: 2 in - 60 in
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Pneumatic Actuated Three Way Ball Valve Provider: BS 5351 Ball Valves with Pneumatic Actuator, ASTM A351 CF8, DN80, PN16, BW, Flanged, FF BS 1560, BS 5146 Test. Valve Description Design ...
China MED Valve Co., Ltd.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 25 mm - 600 mm
Temperature: -46 °C - 250 °C
... wheel can easily open and close the valve. 5) Wedge-shaped seal structure is provided by the mechanical force of the valve stem, ball and wedge against the seat and seal. Track ball is mandatory sealed ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,200 mm
Pressure: 16 bar
Temperature: -46 °C - 550 °C
Design Standard ANSI B16.1 End Connections Flange ASME B16.5/B16.47 Features of 3-way ball valves are as follows: 3-WAY BALL VALVE has two kinds of flow passage pattern:Type L(3-way ...
wenzhou domos fluid equipment co.,ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining