Plug-in digital servo drive
400 W, 50 V, 8 A, CAN / CANopen / EtherCAT | iPOS4808
Technosoft
iPOS4808 VX Intelligent Servo Drive
iPOS4808 intelligent servo drive is a compact and modular plug-in card from Technosoft that can control any rotary or linear brushless, DC brush or step motor up to 400 W.
iPOS4808 VX Features:
• Fully digital servo drive suitable for the control of rotary or linear brushless, DC brushed, and step motors
• Very compact design: 56 x 44 x 7 mm
• Standard PCIe 8x mating connectors
• Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
• Open or closed-loop control of 2 and 3-phase steppers
• Various modes of operation, including: torque, speed or position control; position or speed profiles, external analogue reference or sent via communication bus
• Technosoft Motion Language (TML) instruction set for the definition and execution of motion sequences
• Standalone operation with stored motion sequences
• RS-232 serial communication
• CAN-Bus 2.0B up to 1 Mbit/s / CANopen
• EtherCAT communication via additional extension module (optional)
• 8 digital inputs, 5 digital outputs, 2 analogue inputs
• Incremental quad encoder, analogue sine/cosine incremental encoder, digital and linear Hall sensors
• Support for absolute feedback sensor (SSI, BiSS, EnDAT and resolver) via additional extension module (optional)
• Power supply: 11 - 50 V
• Logic supply: 9 - 36 V
• High current capability (8 A continuous, 20 A peak current)
• Hardware protections
iPOS4808 intelligent servo drive is a compact and modular plug-in card from Technosoft that can control any rotary or linear brushless, DC brush or step motor up to 400 W.
iPOS4808 VX Features:
• Fully digital servo drive suitable for the control of rotary or linear brushless, DC brushed, and step motors
• Very compact design: 56 x 44 x 7 mm
• Standard PCIe 8x mating connectors
• Sinusoidal (FOC) or trapezoidal (Hall-based) control of brushless motors
• Open or closed-loop control of 2 and 3-phase steppers
• Various modes of operation, including: torque, speed or position control; position or speed profiles, external analogue reference or sent via communication bus
• Technosoft Motion Language (TML) instruction set for the definition and execution of motion sequences
• Standalone operation with stored motion sequences
• RS-232 serial communication
• CAN-Bus 2.0B up to 1 Mbit/s / CANopen
• EtherCAT communication via additional extension module (optional)
• 8 digital inputs, 5 digital outputs, 2 analogue inputs
• Incremental quad encoder, analogue sine/cosine incremental encoder, digital and linear Hall sensors
• Support for absolute feedback sensor (SSI, BiSS, EnDAT and resolver) via additional extension module (optional)
• Power supply: 11 - 50 V
• Logic supply: 9 - 36 V
• High current capability (8 A continuous, 20 A peak current)
• Hardware protections
