It basically allows two separate systems to be combined (electrical and pneumatic) and controlled. In addition, it is a product system that enables the assembly and control the powder coating device module and the robot control module on a single panel. ...
Process flow controllers are high-speed closed-loop process gas controllers, designed for real-time, in-situ precision control of reactive sputtering-based vacuum coating and plasma treatment processes. They are complete, compact, flexible, convenient ...
... Binary explosion proof fan (drive) belt monitoring module type ExBin-N for speed control in HVAC systems. - Speed control range: 0-10.000 U/min-1 - incl. directly mountable inductive Namur transmitter acc. DIN 19234 - Certified according to ATEX, ...
... The preeflow Speed Control plug'n'dose 2.0 control unit has been developed specifically for applications in automation. The microprocessor-controlled speed control is designed for integration into larger manufacturing lines and allow volumetric dosing ...
... De Lama S.p.A.‘s Control Systems are based on a distributed logic architecture composed of a Supervisor (PC) and a Programmable Controller(PLC). The supervisor is a PC for industrial application. The Programmable Controller is an Industrial PLC or a ...
... Index control system for rotary indexing table Electronic packaged for the index control system to optimize the cycle time. Features - Compact rotatory indexing table: - Stop at the end of dwell, more production in less time - No brake wear - ...
... Main types of protection -Limitation of the maximum output voltage at the level of 220-230 V -Protection from short circuit under load -Protection from core-to-core fault and earth fault -Feeding cable breakdown alarm -Alarm of surface-leakage ...
... Specifications: • Automatic controlled panel driven by an industrial PC. • QuantX test control software with summaries, archivings and schedule. • Remote maintenance of the console by modem or internet. • Ergonomics working height ...
... Automatic control unit Quantium aimed to research laboratories Specifications • Automatic control unit Quantium aimed to research laboratories • Equipped in series with an industrial PC for a best lasting quality • Adaptative control ...
... General Specifications • Humidity range : 20 - 80% RH • Maximum cabin volume : 10 m3 • Water capacity : 18 L • Dimensions (LxHxW) : 600x1000x900 mm3 • Water level and sensor warnings • Long lasting use Drying Properties • Air flow rate : 260 ...
Pressure: 50 Pa - 500 Pa
... Overview
GeoGuard is a configurable pressure guard system for ventilation and extraction installations. Delivered as selectable sets, it monitors static or differential pressure and activates visual and audible alarms when measured values exceed ...
Geovent
Pressure: 500 Pa - 2,000 Pa
... Overview
The AirBox Lite is a compact pressure monitor for extraction and ventilation systems. It is available in pressure ranges from 500–2000 Pa and features a built-in visual alarm (green for normal operation, red for pressure fault). The ...
Geovent
Pressure: 100 Pa - 4,000 Pa
... Overview
Geovent AirBox IV is a ventilation guard (pressure guard / system guard) designed to monitor process extraction systems (LEV). The unit is compact, simple to install and operate, and provides clear status information on the display ...
Geovent
... What is DC metering?
DC metering measures, collects and stores real-time data for DC systems. Energy professionals use DC meters to monitor generation and consumption, identify system faults, verify performance and manage energy flows in applications ...
... Overview
The TX controller line is developed and assembled in Italy with advanced technology for precise and reliable structural mechanical testing. The controller is available as TX-1 (mono-axial) and TX-2 (bi-axial). It supports static and ...
... Overview
The TDX controller line is a modular controller family developed and assembled in Italy for structural mechanical testing. Available as TDX-1 (single-axis) and TDX-2 (biaxial), the controllers support static and cyclic test profiles ...
... TECPEL DP-50, 50MHz High Voltage Oscilloscope Differential Probe for oscilloscope Product ID: DP-50 DP-50 Differential Probe 50MHz 6500V The DP-50 Differential probe provides a safety means for measuring differential voltage to all models ...
... Product overview
This fully automated transformer control cabinet is designed to support power-frequency withstand-voltage tests in accordance with GB/T16927.1-2001. It integrates a control board and a voltage regulator in a compact, mobile ...
... Product Introduction
The XC/TC Series Test Transformer Control Box (Control Console) is an auxiliary device designed for use with XC/TC test transformers. It provides straightforward operation, easy maintenance and reliable protection for on-site ...
... Product description
EXmatic 470 is an electro‑pneumatic control unit designed to operate EXtract 8XX retractable probe housings. It features an integrated connecting hose that bundles all control tubing for straightforward plug‑and‑play ...
... Overview
EXmatic 471 is an electro-pneumatic control unit designed for fully automatic operation of pneumatic retractable probe housings of the EXtract 8XX series. In combination with an EXtract 8XX housing the unit drives sensors ...
... Product overview
The JSP-3AE series pressure control panel is designed for high-purity gas distribution and control in industrial and laboratory environments. It features a modular layout with automatic change-over capability and is compatible ...
SIVIKO voltage control is a customizable control system for an autotransformer that offers high reliability and convenience. It has built-in safety equipment.
The 4-Quadrant Power amplifier monitor unit is an optional unit of the PAV series of 4-quadrant amplifiers, which can be assembled into the cabinet. The 4-quadrant amplifier can be started, output, and stopped by the hardware of each phase power amplifier, ...
... PAT01 is a power amplifier control unit that controls timing output and reference signal test source for power amplifier. Basic principle and function: (1) Test signal are a good-stability signal generator connected to all amplifiers together to ...
... Overview
The WCS.2000 controller combines user-friendly configuration with specialized wireless technology for stable data transmission. It supports diverse fastening applications and provides comprehensive software functions that enable scalability ...
... Overview
The TCS.2000 controller by Leetx integrates motion process control, data collection and human-machine interaction for corded tightening systems. It provides broad compatibility with tightening tools and supports full process monitoring ...
Product overview The XY Series Level Display Control Box is a centralized panel for remote liquid-level monitoring and pump and valve control. It accepts standard 4-20mA signals from level transmitters, pressure sensors or float switches, presents ...
Pressure: -0.1 MPa - 260 MPa
... Short description
The YD‑4 Explosion‑Proof Digital Pressure Controller by YUNYI integrates pressure sensing, real‑time display, analog transmission and alarm/control outputs in a compact, explosion‑protected housing. Using an intelligent MCU ...
Pressure: 0 MPa - 100 MPa
Intelligent pressure controller is an intelligent digital pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with a front end using a pressure sensor ...
... Overview
The M module (Model M) is a manual control alternative for vacuum leak testing designed to provide simplicity, fast operation and minimal maintenance. It is compatible with any CDV vacuum chamber and enables the same control logic to ...
The Electromagnet Magnetic Field Control System consists of an electromagnet (generates a magnetic field), a power supply (powers the electromagnet), a Gaussmeter (measures the magnetic field generated by the electromagnet), and a computer (controls the ...
... Used to start the extractor directly from the button placed on the hood or also the extractor along with the lighting kit It can be activated through a button located on the hood of the extraction arm Available in the single and three-phase version ...
... - Maximum ambient temperature: +40 ° C - Minimum ambient temperature: -60 ° C - Certificates: ATEX (PTB), Brazil (ULB), Canada (FM), China (NEPSI), Korea (KGS), IECEX (PTB), India (Peso), United States (FM) - Housing material: polyester resin - Case ...
Maximum temperature: -40 °C - 40 °C
... - Minimum ambient temperature: -40 ° C - Maximum ambient temperature: +44 ° C - Range of frequencies: 50 - 60 Hz t - Assigned Esage Assigned AC: 690 V - Service current assigned: 125 A - Certificates: ATEX (PTB), China (NEPSI), IECEX (PTB), India ...
The THE-100 controller is used to control 1-input time pressure valves. The controller has a high performance microprocessor combined with an air pulse to generate a fast and stable dispensing volume. The THE-100 controller features a Vaccum function ...
SUPRATEC Syneo
The THE-100R controller is used to control 2-input time pressure valves. The controller has a high performance microprocessor combined with an air pulse to generate a fast and stable dispensing volume.
SUPRATEC Syneo
The THE-200 controller is used to control 1-input time pressure valves. The controller has a high performance microprocessor combined with an air pulse to generate a fast and stable dispensing volume. The THE-200 controller features a Vaccum function ...
SUPRATEC Syneo