Automatic testers

... Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. It ...

... Measuring and Test Instrument for Testing the Effectiveness of Protective Measures at Stationary Electrical Installations After Installation, Repair or Expansion, and for Periodic Testing (DGUV regulation 3) The PROFITEST MF XTRA provides all measuring ...

... Continuity testing for cold appliance cables and extension cords (single-phase) • PRCD time to trip (30 mA 1xI∆N and 5xI∆N) • Protection class I per EN 61140 • Measuring category: 300 V CAT II ...

... The test instrument is used for the testing of the communication between the charging station and the electric vehicle – with type 2 connector socket (mode 3 charging). The test instrument is connected between the charging station and the electric ...

... For 8-240Ah batteries at 12/24V. Tests carried out: battery status, cranking efficiency, of the cranking system and the alternator circuit. Selectable reference international standards for vehicles to which the various starting amp ranges used ...

... Product overview
The D26 SPEED is a compact high-speed flow tester designed for automatic and semi- automatic test machines. With a throughput up to 240 parts/min, it provides continuous flow ...

... After more than 50 years, and 300,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary flow tester: D620. New electronic module, new measurement module, new interface, new ...

... BA1500 scientifically analyzes battery performance with a true constant current battery capacity test. The device is fully automatic plug & play ; no set up required. FEATURES Battery Analyzer for Aviation lead-Acid batteries Max ...

... Based on TSI's established model 8130, currently the world's most-used filter tester, model 8130A now offers higher sensitivity and resolution - up to 99.9999 percent efficiency has been produced with Emery oil at concentrations of 200 ...

... PRODUCT DETAILS TSI’s Automated Filter Testers have been used in quality control and manufacturing for more than 35 years. The model 8130A is used by the leading filter and filter media manufacturers, test laboratories, ...

... THE AUTOMATIC INCLINED PLANE TESTER FOR STATIC FRICTION COEFFICIENT DETERMINATION Sofraser’s FTIP, with its motorized, inclined platen, uses the simplest technology for the dynamic coefficient calculation of slip resistance ...

... operated in conjunction with a PC via a TCP/IP, USB and RS-232 interface. This means that it can also be used within automatic testing systems and production lines. ...

... DC: 100 - 6,000 V / 250 kΩ - 1 GΩ • Wide-range power supply unit: 90 V to 253 V, 50 Hz / 60 Hz The HA 1800M hipot tester combines high-voltage testing (AC and DC) and insulation testing in a single device. The HA 1800M is ideal ...

... Thanks to the individually configurable test programs, a fully automatic test plan can also be created for each product. With a short-circuit current of 3 mA AC / 10 mA DC, the HA 1805B tester is safety current-limited ...

... possible to use the SPT-6 in either a PTZ AUTO 1-4, PTZ AUTO 1EZ-4EZ or a PTZ-S tablet disintegration test instrument. Automated Operation When using the SPT-6 together with any PTZ AUTO EZ tablet disintegration testing instrument ...

... support of all components. The PTWS 1420 is a 7+7+2 position 7-by-2 dissolution bath with an automated lift system for the instrument head. An automated sampling manifold EPE is used to perform dissolution tests as ...

... company is responsible for the support of all components. The PTWS 120D Dissolution Tester The PTWS 120D is a 6 position 3-by-2 or 2-by-3 dissolution bath with an automated lift system for the instrument head. The ...

... State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_ Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and SkiGoggles according ...

... Automatic Uniformity Tester according to ISO 12312-1, GB 39552.1, ANSI Z80.3, ISO 16321-1, EN 174 & ISO 18527-1 Easy_ Tester_Pro is the Worldwide Optical Market Standard Device that performs a complete ...

... Polarization Axis Tester for Optical Industry According to International Standard ISO 12312-1 Smart_Polar checks the Polarized Filters for SunGlasses, Masks and SkiGoggles in accordance to International Standards Automatic ...

... or lowering during automatic control

... test voltage, 8-channel high-voltage leakage current, calendar, timing duration, and Chinese text prompts.

... circuit protection devices, energy meters, motors and power cables.

• Multi-mode operation: Manual (knob),

... test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249. 1) Plastic film, composite film, aluminum foil, aluminized film,etc; 2) ...

... Water Vapor Permeability Tester Electrolytic Sensor Method W203 Watef Vapor Permeability Tester Wholly automatic, software easy to use. Curves of transmission rate, water vapor density, humidity and ...

... Gas Transmission Rate Tester

Introduction
The GBPI N560 2.0 Gas Transmission Rate Tester is a laboratory instrument integrating mechanical, electronic and software subsystems. ...

... 0~1400μm Accuracy: 2.5% Automatic ferrous or non-ferrous substrate material measurement Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate measurement Audible and visual warning when ...

... power off function: The timer operates automatically about 10 minutes when the “ Test Button Switch ”are pressed to keep the tester power on. 2mA measuring current permits earth resistance tests without tripping earth leakage current ...

... power off function: The timer operates automatically about 3 minutes when the " Test Button Switch " are pressed to keep the tester power on. 2mA measuring current permits earth resistance tests without tripping earth leakage current ...

... FT3000 HVDC Power Filter Characteristic Tester has the functions of automatic sweep harmonic signal output, A-F and P-F characteristic measurement/display etc. It can perform HVDC Power Filter Testing and is mainly used ...

... PB-03 Air Permeability Tester is based on the differential pressure method (Oken Type), and is professionally applicable to the determination of air permeability of battery diaphragms, breathable films and other relative polymer products. - ...

... The M6.5 Automated Filter Integrity Tester is suitable for integrity testing of various filter membranes, disc filters, capsules, cartridges, etc. This tester is a compact, easy-to-use, and fully ...

... The Battery Diaphragms Gas Permeability Tester is based on the differential pressure method (Oken Type), and is professionally applicable to the determination of air permeability of battery diaphragms, breathable films, and other relative ...

... The Corrosion Test Apparatus is developed to assess the amount of acid gas generated from the combustion of materials by measuring the pH & electrical conductivity. The test specimen is pushed into a tube furnace and burned for 30 minutes. The generated ...

... Automatically correct the impact of atmospheric pressure on the test and calculate the correction value; 6. Differential detection, automatic correction of system deviation; 7. Scan, ignition, detection, print data automatically completed ...

... manufactured according to GB/T3536 standard and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. Advanced technology, simple operation, accurate test, good repeatability, high technology content is an ...

... Automatically correct the impact of atmospheric pressure on the test and calculate the correction value; 6. Differential detection, automatic correction of system deviation; 7. Scan, ignition, detection, print data automatically completed ...

... The DX-2012F is a multi-dimensional, high-precision, fully automatic digital magnetic field measurement system designed to map three-dimensional AC and DC magnetic field distributions for objects and volumes of arbitrary shape. It acquires, ...

... RAEM1-6 is a multi-channel intelligent IoT acoustic emission monitoring system that integrates automatic control signal acquisition, processing and analysis, data storage, clock synchronization and wireless communication. RAEM1-6 is a ...

RAEM1 system is a complete full function single channel AE system not only for remote wireless long term non-destructive monitoring applications but also for standalone local detection purposes. RAEM1 is a single channel AE system integrated with AE sensor, ...

... will develop a concept for you to record the required quantities. Our spectrum ranges from small manual test systems to fully automatic test systems. We offer special testing facilities in the following areas: • Wear • Deformation • ...

... shock tests can be carried out by selecting different waveform generators. Leading Factory Mechanical Shock And Impact Tester for Auto Spare Parts is designed for measuring and ensure shock performance of products and packages. It ...

... -75~150c, 5%R. H. Temperature Humidity Vibration Comprehensive Resistance Tester provides the change of temperature and humidity environment for the aerospace, aviation, petroleum, chemical, electronics, communication and other scientific ...

... thanks to its reliability, ease of use, and low operating cost. Description ATS Tube Seal Tester – A destructive test to guarantee quality The ATS seal tester is designed to evaluate the quality and strength of tube ...