Input voltage: 380 V - 480 V
Output voltage: 48 V
Power: 1,500 W - 3,200 W
... Description
Industrial
power
supply designed for use with SOMANET and ACTILINK equipment. Provides 48 V
DC output with 1500 W continuous and 3200 W peak capacity. Integrated braking chopper ...
Input voltage: 342 V - 528 V
Output voltage: 48 V
Power: 960 W - 2,000 W
... : MPSU-960-48-MB
Input voltage: 220 V
Output voltage: 24 V
Current: 5.2 A
... PSU-20 can reliably supply current in the area installed at plenty of flame detectors during rectification (at DC24V). • Reliably supply spare current • Supply current up to 20 flame detectors ...
Input voltage: 85 V - 370 V
Output voltage: 5 V
Current: 5 A
... Power supply, 5A, 5VDC, 85 to 264VAC Universal, DIN mount, Switching power supply FEATURES • Universal AC Input (85 to 264VAC) • DC Compatible Input (120 to 370VDC) • ...
Dataforth Corporation
Input voltage: 105, 125 V
Output voltage: 5 V
Current: 1 A
... encapsulated power supplies are available in 120VAC or 220VAC input voltage ranges and provide 5VDC outputs suitable for all SCM5B modules. They are designed to mount on the SCMXRK-002 metal rack or DIN-rail EN 50022- 35x7.5 ...
Dataforth Corporation
Input voltage: 85 V - 264 V
Output voltage: 24 V
Current: 5 A
... Power Supply, DIN Rail Mount, 85-264 VAC 47-63 Hz In, 24 VDC 5.0 A Out Dataforth’s PWR-PS5RxW series sets new standards for switching power supply technology. Combining rugged, compact ...
Dataforth Corporation
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 40 mA
... Description: - Current loop power supply Power supply: - 115 / 230 Vac ± 10% 50 / 60 Hz Consumption: - 1,5 VA Stabilized output: - 24 Vdc 40 mA Operating temperature: - - 10 ...
SENECA | AUTOMATION INTERFACES
Input voltage: 24 V - 230 V
Output voltage: 24 V
Current: 50 mA
... Description: - Current loop dual power supply Power supply: - 115 / 230 Vac (s100s-1-ST); 24 V (s100s-3-ST) Consumption: - 3,5 VA Output: - 2-CH stabilized output with galvanic ...
SENECA | AUTOMATION INTERFACES
Input voltage: 115 V - 230 V
Output voltage: -15 V - 15 V
Current: 350, 75 mA
... Description: - Dual stabilized power supply Power supply: - 115 / 230 Vac ± 10%, 50-60 Hz Consumption: - 7,5 VA Output: - + 15 Vdc 350 mA; - 15 Vdc 75 mA Operating temperature: ...
SENECA | AUTOMATION INTERFACES
Input voltage: 230, 115 V
Output voltage: 18 V - 23 V
Current: 4 mA - 20 mA
... • Multiple power supply electronically up to four two-wire transmitters • Isolation of each circuit with each other protected against short circuits • Plastic housing for mounting on a 35 mm DIN-rail according to EN ...
Input voltage: 90 V - 264 V
Output voltage: 12 V
Several universal AC adapters / chargers for Mark-10 force gauge and torque gauges are available, each of which consists of a body and replaceable prong. Spare prongs are also available.
Input voltage: 90 V - 264 V
... PoE Single Port injector to supply Basler ace GigE cameras with power via a data cable. The PoE Single Port injector has two RJ-45 jacks and one C14 jack for power supply. ...
Input voltage: 12 V
Power: 18 W
... Power supply for Basler pilot, scout GigE and aviator GigE cameras. This camera power supply delivers 12V and is equipped with a Hirose 12-pin connector on the camera side. This Basler ...
... The compact Q.PS-PEL-240x power units with 24 VDC output voltage can be installed in a very restricted space and therefore the installation in cost-effective electrical distributor boxes in accordance with DIN 43880 ...
Input voltage: 190 V - 264 V
Output voltage: 12 V
Current: 1.25 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 2.5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc ...
ZELEC
Input voltage: 198 V - 242 V
Output voltage: 25 V - 250 V
Current: 15 A - 20 A
... Manufacturer: UHV
Power
Precautions
- Before operating the power supply with a high-voltage switch, carefully read the user manual to understand the operating methods
Input voltage: 220 V
Output voltage: 0 V - 420 V
Output frequency: 40 Hz - 65 Hz
... The UHV-930 precision program-controlled power supply is a programmable AC voltage and current source designed for inspection, calibration and production test applications. It provides low-distortion sinusoidal outputs ...
Input voltage: 5 V - 30 V
Output voltage: 5 V - 30 V
... preamplifier power supply and signal separator. When the chosen data acquisition board cannot supply power to the preamplifier and there is no power adapter available ...
Input voltage: 230 V
Output voltage: 24 V - 200 V
Power: 125 W - 1,500 W
... These equipment are DC power supply for electromagnetic chucks. They are used to magnetize an demagnetize the chucks. In addition, while demagnetizing the chuck, they carry out a process that removes the residual magnetism ...
Output voltage: 0 kV - 50 kV
Current: 0 mA - 1 mA
Power: 50, 40 W
... • Voltage : 0-40 kV ; 0-50 kV • Current : 0.0-1.0 mA • Power : 40 W ; 50 W • Control : 3 inches touch screen • Safety : Automatically shut down when spark occur • Dimensions (LxWxH) : 300x400x150 mm3 • Weight : 5 kg ; 6 kg ...
Input voltage: 90 V - 305 V
Output voltage: 14.36 V - 14.64 V
Current: 0 A - 0.6 A
... br>The PTM-16 converts two AC power inputs from an automatic transfer switch (ATS) into a stable DC power output, enabling ATS installation sites to supply DC-powered control units. It is designed to ...
Input voltage: 1,100 V
Output voltage: 0 V - 13 V
Current: 50 mA
... Continuously adjustable, accuracy up to 6½ digits Voltage output resolution 10μV The ATS-1100V is a reference voltage source with high precision and high stability voltage output. Maximum output voltage is 13V, rated output current is 50mA. Voltage ...
Input voltage: 1,200 V
Output voltage: 0 V - 13 V
Current: 50 mA
... Continuously adjustable, accuracy up to 6½ digits Voltage output resolution 10μV The ATS-1200V is a reference voltage source with high precision and high stability voltage output. . Maximum output voltage is 13V, rated output current is 50mA. Voltage ...
Input voltage: 2,000 V
Output voltage: 2, 200, 6, 200, 20 V
... Digits 4½位 Resolution 2μV The ATS-2000V series is a voltage source with high accuracy and high stability voltage output. Maximum output voltage 200V, minimum voltage resolution 2μV, high output accuracy and low noise. The operation panel is displayed ...
Input voltage: 12 V
Output voltage: 12 V
... b>Technical information
- Product name: Pulse control power supply
- Category: Machine Vision
- Brand: SEIWA
- Image filename: Pulse-control-power-supply-1155x1536-1.png
- No
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
... specifications
- Product name: Digital PWM Power Supply
- Brand: SEIWA
- Category: Machine Vision (Product Information)
- Main image filename: Digital-PWM-power-supply-1092x1536-1.png
Applications ...
Input voltage: 230 V
Output voltage: 6 V - 24 V
... li>
Product description
The DT2500… Intrinsically Safe Output Power ...
Input voltage: 90 V - 240 V
Output voltage: 0 V - 40 V
Current: 0 A - 5 A
... • 4OVDC/5ADC wide range output. • Switching technology, analog quality. • 1+2 output 200W. • 1 programmable output (0-40V/0-5A), 2 fixed outputs (5V/2A and 3.3V/3A). • High resolution (lmV, imA), high stability and low drift. • Low noise and ripple ...
Input voltage: 220, 110 V
Output voltage: 180 V - 286 V
Current: 5 A - 200 A
... 5000m
•
DC auxiliary
power
supply for switchgear, breaker, control and protection system
• Communication protocol: RUT/CDT/MODBUS, RS232/RS485 or TCP/IP interface
DC
Power ...
Input voltage: 198 V - 242 V
Output voltage: -5 V - 8 V
Current: 120 A
... Overview
The DXNT series Superconducting Magnet
Power
Supply by Dexinmag is an all-digital, high-stability bipolar current source engineered for superconducting magnets. It combines a switching pre-regulation ...
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
... This power supply is a highly stable bipolar constant current power supply, which is widely used in the excitation of inductive loads such as electromagnets and Helmholtz coils. The power ...
Input voltage: 200 V - 240 V
Output voltage: 32 V
Current: 10 A
... DX-3500D three-channel precision DC power supply is a three-channel high-precision bipolar DC power supply. It is mainly used to provide high-precision bidirectional current excitation ...
Input voltage: 9 V - 264 V
Output voltage: 24 V
Current: 230, 125 mA
... This supply unit is allowed for the operation of 24 VDC sensors, such as vent- and flowcaptors, with AC supply voltage. The supply unit contains a 24 VDC transformer rectifier and a switching circuit ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 5 A
... - External power supply for LCD monitors up to 19" TFT - Black housing - Input: 100 - 240 V AC IEC320 C14 3-PIN TYPE cold device socket - Output: Jack plug 5.5*2.5*9.5mm, cable length 1.8 m - 12 V, 5 A (approx. 45 W min.) - ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 1.5 A
... Power supply with AC-DC plug-in type converter in switching technology. - Protection: overload, temperature - Cable length: 1m - Dimensions: 59.3x30.7x75.6mm - Weight: 128g - HS code: 85044050 ...
M.A.E. S.r.l.
Input voltage: 115, 230 V
Output voltage: 15 V
Current: 1,600 mA
... AC-DC power supply plug-in type converter in switching technology, 15V, 1600 mA, 24 watt Depth: 75 mm Height: 74 mm Widt: 43 mm Status: ErP livello 2 Connector: Spina 5,5/2,1 Tipology: SYS 1308-2415-W2E Maximum ...
M.A.E. S.r.l.
Input voltage: 115 V - 230 V
Output voltage: 5 V
Current: 1,500 mA
... Charger 1 USB 1500 mA european plug 1 pins interchangeableplugs for universal use Switching power supply plug type Double coating Compact structure Protection againist shortcuit and overload EU CoC V5 tier 2 / ...
M.A.E. S.r.l.
Input voltage: 125 V - 265 V
Output voltage: 24 V
Current: 0.4 A
... Product
Switching
power
supply D1, input 230Vac, output 24Vdc 400mA. 1 DIN module size.
Code
Model: PFTP100-Q2
Description
Compact DIN-rail switching
power ...
Input voltage: 230 V
Output voltage: 5 V
Current: 0.6 A
... Product
Switching
power
supply PFTP000-R2 5 Vdc 600 mA
Code
Cod. PFTP000-R2
Description
Compact switching
power
supply with 230 Vac input and ...
Input voltage: 230 V
Output voltage: 13.8 V
Current: 5 A
... Product name
Switching
power
supply and battery charger PFTP800-P2 D8 230VAC 13.8VDC 5A
Short description
Switching
power
supply 230VAC with integrated battery ...
Input voltage: 90 V - 264 V
Output voltage: 12 V - 48 V
Current: 2.61 A - 14.17 A
... Overview
The LPP300 Series is a compact open-frame AC-DC
power
supply delivering up to 300 W (with airflow) in a low-profile 0.75 in form factor. Available nominal outputs are 12 V, 24 V and 48 V. Units meet ...
Input voltage: 85 V - 370 V
Output voltage: 12 V
Current: 1.25 A
... -DIN rail mount -Universal Input 85-264 VAC, 100-370 VDC -Output voltage 12 VDC -Output power 15 W -Output current 1.25 A -Dimensions 17.5 (1SU) x 90 x 55 mm ...
Output voltage: 220 V
... Product overview
220V to USB
power
supply module for powering Nexelec devices. The LOAD module converts mains 220V to a USB output and is designed for installation inside a flush-mounted box to enable surface ...
Input voltage: 100 V - 240 V
Output voltage: 24 V
Output frequency: 50, 60 Hz
... 24 VDC supply, which meets the incoming power requirements of the XT1000 or XT2000 weight indicator / transmitter. Simple to fit to a DIN rail / Omega rail and install, the XT1000-2000-PS power supply ...
Input voltage: 85 V - 370 V
Output voltage: 48 V
Current: 1.6, 2.5, 5, 10, 20 A
... series of DC single output industrial DIN-rail power supply units to make sure that industrial Ethernet devices, specially designed for the harsh working environment, get DC voltage power ...
... Product Details
- USB Radio Adaptor for Radio Ohmstik.
Characteristics / Technical Specifications
- Model Number: 7-024
- Product Type: USB Radio Adaptor
- Compatible with: Radio Ohmstik
- Brand:
SENSORLINK
Input voltage: 230 V
... electrochemistry platform can be used with any suitable power supply however we do offer a range of DC bench power supply modules you can purchase with your apparatus. Typical ...
Output voltage: 0 V - 15 V
Current: 0 A - 2.5 A
... Single-output DC laboratory power supply 0-15.0 VDC / 0-2.5 ADC adjustable output Separate display of voltage and current settings Coarse and fine voltage output adjustment Full overload ...
MULTIMETRIX
Input voltage: 100, 120, 220, 230 V
Output voltage: 0 V - 32 V
Current: 0 A - 10 A
... Series Power Supplies combine new high speed and high accuracy technology to provide a flexible test and analysis instrument for all of your DC power applications. Low ripple noise: <350uVrms / 2mVpp One ...
Rigol Technologies EU GmbH
Input voltage: 100 V - 240 V
Output voltage: 12, 9 V
Current: 1 A
... Power Supply specifically designed for use with 3-pin, Delta Regis 2Series Brushless 12VDC Screwdrivers. The power supply converts AC input power to the DC ...
Delta Regis Tools
Input voltage: 220 V
Output voltage: 10 V
... We have switched-mode power supplies for equipment and systems powered by direct current and specific linear power supplies for the connection of transmitters and sensors ...
Input voltage: -72 V - 2,000 V
Output voltage: 12.4 V
Current: 2.66 A
... Pageant power isolator is a single channel galvanically isolated power supply with Ex ia associated apparatus certification. It is primarily intended for powering the BEKA Pageant intrinsically safe operator ...
Input voltage: 24 V - 28 V
Output voltage: 340 V - 550 V
Current: 0.85 A - 20 A
... DC power supply, 3-phase, 125x128x86mm,, -30-70°C, Screw connection, IP20, Aluminum, Stabilized, Output voltage, pulsed Power supplies - Switching power supply ...
Input voltage: 24 V - 110 V
Output voltage: 5 V - 20 V
Power: 0 W - 60 W
... approved PD/PPS power supplies convert high voltage AC or DC train carriage power to the correct phone or laptop charging voltage for the USB-C sockets. Using the Power ...
Input voltage: 11 V - 28 V
Output voltage: 400 V - 1,000 V
Power: 10 W - 20 W
... Product Overview
The Excelitas PS-1100 Series
power
supplies provide regulated DC
power for operating FX-1100 Series flashlamps and FYD-1100 Lite-Pac Trigger Modules. They are intended for
DC ...
Excelitas Technologies - PCO
6 expert tips
Always verify the technical certification to ensure compliance with local building safety standards and long-term durability.
Prioritize modular designs to allow easy field replacements and rapid scalability within evolving robotic assembly line electrical control cabinets.
Select units with peak power capabilities to handle high inrush currents from inductive loads without triggering unnecessary system shutdowns.
Implement remote monitoring interfaces to track power health and predict potential failures before they disrupt valuable production equipment operations.
Calculate the total cost of ownership by weighing initial procurement prices against energy savings from high efficiency conversion modules.
... DC Power Supplies CONTA-CLIP offers many different components: smoothed or un-smoothed transformers, unstabilized or stabilized mains power supplies, and also primary clocked power ...
the best suppliers