DN: 80 mm - 250 mm
... Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without mounting frame. Outake ...
DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar
... The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and Paper ...
ORBINOX
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
... Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size) ...
F.lli TOGNELLA
Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C
... Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F ...
Pressure: 400 bar
... Solenoid valve 4/2 is designed to control the lubrication supply in two-wire systems. This valve is capable of using MAX NLGI 2 grease with a maximum pressure of 400 bar (5880 psi). When the main circuit is alternately ...
SOATO FLUID SYSTEM
DN: 6, 4 mm
Pressure: 2 MPa - 20 MPa
... Progress method Grease progressive valve SP For tightening torque Discharge volume - 0.2mℓ/ stroke Discharge port - Tube of 6mm, 4mm O.D used Grease inlet - Rc1/8 Max. working pressure - 20MPa Minimum operating pressure ...
DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...
Value Valves Co., Ltd.
Flow rate: 2 l/h - 15 l/h
... digital output. The non-linearity of the valve can be repaired by software in five points. Built-in security feature: In case of power loss the valve has a battery backup that closes or opens the valve. ...
Controlmatik
DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa
... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 0.25 in - 2 in
Pressure: 2,000 psi
... AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only), ...
BOLA-TEK Mfg.Co
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C
... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...
STÖHR ARMATUREN GmbH & Co KG
Temperature: 425, 325, 530, 200 °C
... •Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil etc non corrosion ...
Jiangsu Zhengxuan Petroleum Machinery Co., Ltd.
... The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") and PP3048063020 (63mm x 2"). ...
FGS Brasil
... V Series Valves V Series Valves are used with full flow dispensers where feed rate adjustment is desired at the point of lubrication. Horizontal design of needle valve minimizes contamination at ...
... Dredge Gate Valve FEATURES: The dredge valve is designed in such a way that there are no fasteners inside the body Dredge valve is made of fabricated high tensile steel and cast steel The dredge valve ...
DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C
... high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 according to EN ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
... operating cycles High-performance valve with a extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized by a solenoid ...
Kühme Armaturen GmbH
... The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection to the flow-operated ...
Stanelle Silos + Automation GmbH
... flanged compact ball valve ; 2-way GRPP, ASPP or PVDF from 1/2'' to 2'' EPDM, FKM or FEP/FFKM o'ring PN10 ...
SAFI
... by an external hydraulic or pneumatic pressure. The valve position will be controlled by a hand operated selector valve. The valve and the controls will be a Dorot Series 100 valve or ...
Dorot Control Valves
... Dimensions: DN04 to DN25 body: FSt-PI, free cutting steel, S355J2G3 ball + stem: free cutting steel, stainless steel (1.4571/316Ti) sealing: plastics, metal Pressure range: up to PN500 (note table of dimensions) Field of application: hydraulics, ...
Pister Kugelhähne
DN: 6 mm
Pressure: 0 bar - 290 bar
... The UZRR6 Pressure-Reducing Valve is size 6, and has a maximum working pressure of 31.5 MPa. Its flow rate reaches up to 50 dm3/min. The valve is designed with a main valve and a pilot valve. ...
PONAR S.A.
Pressure: 3,000 psi
... Model RD-900 Selector Valve - 30 GPM SPECIFICATIONS Pressure Rating Maximum Operating Pressure ........ 3000 psi Flow Rating .....................................30 GPM Filtration: For general purpose valves, ...
Prince
DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C
... – shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer bellows with long ...
ARAKO spol. s r.o
DN: 0.375 in - 1 in
Flow rate: 30 l/min - 200 l/min
... Throttle Valves Valve Size 04 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-piate Mounting T : Threaded Connections Sériés Number ...
... JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and bonnet. Backseat ...
Jianhu Jielin Petrochemical Machinery Co., Ltd.
DN: 50 mm - 1,400 mm
Temperature: -196 °C - 593 °C
... Product type On/Off Type Product description Top-entry Ball Valve Model SQ*47F/H Size NPS 2～NPS 56 ...
Beijing Valve General Factory Co., Ltd
... . AFC Monel valves serve many different applications in these industries: • Chemical • Oil & Gas • Pharmaceutical • Nuclear Power • Marine • Petrochemical • Oil Refining • Sea Water Characteristics 1. AFC butterfly valve ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
... Applicable standards: STEEL BALL VALVES API 608/API60 STEEL BALL VALVES ISO 14313 FIRE SAFE, API 607 ANTI STATIC, API 608 STEEL VALVES,ASME B16.34 FACE TO FACE ASME B16.10 END FLANGES, ASME ...
WENZHOU AEA VALVE CO., LTD.
Pressure: 150,000 Pa - 850,000 Pa
... DZ SERIES VALVE DZ Valve – This valve can be used as manual 3/2 valve. When the machinery is maintained and serviced, the valve for remaining pressure shall be used ...
XHnotion
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... switches •Space heater, space heater's thermal swich •Mechanical connection (lange F10, IS05210 •Manual control. •Gâte valve design standards: DIN3352, (ace to (ace dimensions DIN3302 F4, EN558 1 15/IS05752 ...
BLUCAST
DN: 3 in
... The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling capabilities. ...
OPW
DN: 50 mm - 1,250 mm
... Tender specification PVC HOKA PVC damper valve with hand lever with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. as damper valve for adjusting volumetric ...
HoKa GmbH
DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C
... GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched advanced technology. ...
KTN
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
... Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high precision in the flow control ■ ...
F. Nencini Srl
... PB219058 - Polypipe UFH 22MM UFH MIXING VALVE. EAN No: 5022733029177 Sales UoM: EA Gross Weight Kg: 0.83 Net Weight Kg: 0.83 Pack Qty: 1 Thickness mm: 100 Width mm: 150 Length mm: 65 Angle: NO ...
DN: 1.5 in - 4 in
... Opening/closing: by 3W solenoid pilot valve •Applications : For water distribution •To remove operation of hydraulic valve by electric command Description G500-EL model valve is the hydraulic ...
BACCARA AUTOMATION
... Manifold valves stack multiple hydraulic valves on different levels of a single valve assembly according to the hydraulic principle diagram to achieve a variety of functions through an internal oil passage. ...
the best suppliers