DN: 40 mm - 900 mm
... MODULATING ALTITUDE VALVE- Single acting. Same construction as Model C000/CF000. Level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options. ...
Flomatic
DN: 2.5 mm
... Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, pack: 1 pc.,Cat. ...
... experience into creating a variety of actuators and on/off valve options for the toughest of applications. See what our technology can do for your operations. Proven Performance Our On/Off valves perform under pressure ...
... PDA Pneumatic Control Valves allow for direct remote control of individual friction modules simultaneously on a brake. Brake friction modules can turned on or off from the PDA to set brakes to run at varying torques based on the needs ...
... The DWA water Guard with motor rotary valve was developed especially for use in medical water processing. If the water sensor comes into contact with liquids, the motor rotary valve closes within a few seconds and ...
DN: 400 mm - 2,000 mm
... It mainly serves to adjust or stop the waste water level inside the channel. Turning the handwheel placed on the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way the clear opening. PRINCIPAL ...
DN: 20 mm - 63 mm
Pressure: 10 bar
... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness. ...
Codital
DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C
... diagnostics of “ valve-actuator” system due to application of smart electro-pneumatic positioners high tightness of closure due to application of soft valve seats (with PTFE seals in the whole range of flows and characteristics, ...
Zaklady Automatyki POLNA S.A.
Flow rate: 500 us gal/min
... piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal ...
Pressure: 29 bar
Flow rate: 12 ft³/min
... Shut off valve for individual control Easy connection to air hose ...
Pressure: 90 psi
Temperature: 0 °C - 80 °C
... can still accomplish a precision dispensing at the weight level of 0.01mg. The APM Technologies’AD-C1 high-speed injection valve is suitable to use for dispensing machines. Application Areas: Electronic encapsulation field, lighting ...
... The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, the run of the lens is guided ...
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
... As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, the Rimor technical ...
Rimor
... maintenance. Inline check valve/swivels are used at the inlet ports to provide backflow protection as well as freedom of movement. A wide range of peripheral items are available to enhance the operation of our valves, ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
... DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston or, if more than ...
I.L.C. srl
... stainless steel mesh strainers will protect the check valve and also the dispenser internals. Our High Flow under pump valves are the leading valves in the market and as well as selling to OEM's for ...
... Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation ...
MDC vacuum products
DN: 0.125 mm
... This flow control valve is provided for repeatable oil flow control in one direction. This valve prevents damages to the system caused by high flow rates. It was made with a lockable adjustment knob. ...
Kurt Manufacturing-Industrial Products Division
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...
Meca-Inox
DN: 0.5 in - 4 in
Pressure: 16 bar
... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...
SIMPLE VALVE, S.L.
DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C
... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with standard accessories: solenoid ...
RedStar AirCompressor Parts Manufacturing Co., Ltd.
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
... Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air. ...
SAF S.R.L.
DN: 50, 40, 25, 20 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C
... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free. ...
Airpipe Europe
Pressure: 64, 130 bar
... • Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ASME B1.20.1, JIS ...
ROPO GmbH
the best suppliers