... Valves and Subplates For inline applications, use the 61642 Valve mounted on a 61646 Subplate. This set-up is also recommended for use with high volume air-powered hydraulic pumps in StayLock applications. For manifold ...
... FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle and does ...
Zenit
DN: 25 mm - 100 mm
... Stainless steel valves by VLS Components include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Sizes of stainless steel valves ...
DN: 0.375 in - 0.5 in
Pressure: 145 psi
Temperature: 32 °C - 140 °C
... FAV Series soft start valves protect your pneumatic system and give you peace of mind whenever installation or repair occurs. The valves raise incoming pressure, supplying air at low speed to avoid damaging critical components. ...
Pressure: 600 bar
... • Manual operated valves (leakage free) • 3/3-way for use with single acting cylinders • 4/3-way for use with double acting cylinders • Maximum flow 40 l/min • Maximum working pressure 600 bar • Oil ports M18x1,5 • Lever operated ...
QUIRI
Temperature: -5 °C - 50 °C
Flow rate: 83 l/min
... FEATURES: Available with flexible or rigid extension Fluids: Oil Nozzle tip with automatic on/manual off 3⁄4” NPTF(f) inlet, with swivel Lever locking handle Lever guard Rate (per minute): 22 gallon (83 liter) Operating ...
Alemite
Pressure: 500 bar
... The purge valve GAV is a rugged and competitively priced discharge valve. Its advanced design combines ease of use with excellent line availibility. Thanks to the compactness of its design, it is ideal for modern extrusion ...
DN: 5 mm - 100 mm
... SELECTION VALVE FOR SUCTION CUP FROM Ø5 TO 100 Applications leak limiter for suction cups outside of the part ...
SAPELEM
Temperature: 0 °C - 90 °C
... the symmetric construction of the valve housing, the valve can operate as either an opening valve (WRV-O) or closing valve (WRV-S). Any change in the operation of WRV-O or WRV-S valves ...
Temperature: 37 °C - 45 °C
... Protect workers from scalding with a thermostatic mixing valve at potable and/or service water points. Keep mixed water at a stable temperature of ±1.5ºC from 37 to 45ºC. The mixing valve has an anti-scalding safety ...
DN: 50 mm - 200 mm
Pressure: 0.5 MPa
Temperature: -30 °C - 120 °C
... Butterfly valves are made of steel and designed with mechanical seal structure. The flow direction arrow and switch positioning device are located at shaft head. Customized butterfly valve is also available depends on ...
... Manually operated. Motor/electrical actuator operated. Shutters type SKT can be installed into a grain spout for the regulation or cutting off of the flow. The shutter type SKT is controlled by means of special internal guides ensuring that kernels ...
DN: 2 in
... BACKWASH VALVE FOR SIDE MOUNTED SAND & D.E. FILTERS The side mounted Hi-Flow valve is designed for maximum performance and working pressures. Available in 2-in. slip models. FEATURES PVC body Large, one-piece ...
DN: 0.5 in
Pressure: 0 bar - 8 bar
Temperature: 4 °C - 90 °C
... Fine Flow Needle Valve Product Code - 22272908011 Name - Fine Flow Needle Valve Material - Reinforced Polypropylene Color - Orange Hydraulic Connection - BSP 1/2″ Seal Material - Viton Body Color - Gray Handle ...
TEFEN
DN: 0.25 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 60 °C
... - Whitworth pipe thread - Sealing NBR (Perbunan) - Material 1.4305 - Type: Poppet valve - Allowable medium: Air - Temperature range -10 to +60 °C - Working pressure range 0.5 to 10 bar ...
... control signal the spool is held in neutral by a flat spring, providing a defined safe position in case of power loss. The valve electronics form a compact, integrated unit providing a closed-loop position control and efficient drive ...
... BelGAS Standard Needle Valves offer four choices in 316 stainless steel, as well as one piece forged carbon plated steel, soft seat and hard seat, angle and globe styles. The Mini valve offers 2 choices in 316 stainless ...
DN: 0.4 mm
Pressure: 345 bar
... A stainless steel two-position valve with a needle injection port on the front side. This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has ...
ECOM
... Standard Hydraulic Cylinders OVERCENTER VALVE AND PARACHUTE ...
DN: 1 in - 32 in
Pressure: 200, 1,300 psi
Temperature: 0 °C - 350 °C
... 1970’s, the Dome Valve® is unique in its ability to open and close with a tight pressure seal in pneumatic conveying systems for abrasive materials. No other valve can achieve as long of a life in harsh environments like ...
DN: 50 mm - 1,000 mm
Temperature: -20 °C - 500 °C
... The slide valve, alternatively recognized as a gate valve or knife valve, serves as a specialized valve designed for the opening and closing of pipelines within solid material conveying ...
... isolation flap valves are a simple, economical and very effective solution for cutting off the area where the explosion occurred from the rest of the installation by immediately closing the pipeline. The explosion isolation non-return ...
Grupa Wolff
Valve for oil discharge in case of pressure exceeding the limit
DN: 78 mm
... The Industry-Leading 78mm Vacuum Valve The Airvac 3” (78mm) Vacuum Valve is engineered for durability and efficiency. Designed to handle larger solids, it includes advanced features like corrosion resistance, pneumatic ...
Pressure: 10,000 psi - 15,000 psi
... with limiter switches. Valves can be serviced without removing from the line. Plug valves for standard service range are available in 1 ” to 4 ” bore sizes and 6,000psi to 20,000psi rated pressure. We has also developed ...
Pressure: 10 bar
Temperature: -20 °C - 60 °C
Flow rate: 25, 35 l/min
... Economizing valves for regulators Regulating valve to be placed at the outlet of central regulators for arc welding to reduce the welding pressure. Total safety and reliability. All our regulators are tested for ...
Pressure: 16 bar
Temperature: -20 °C - 40 °C
... Outlet valve for gas cartridges • Adjuster for metallic gas cartridges • according to DIN EN 417:2012 • outside thread M 10 x 1 • CE-0085CQ0255 ...
DN: 150 mm - 2,500 mm
Pressure: 5 bar
Temperature: 1,000 °C
DN: 80 mm - 800 mm
Pressure: 4, 6, 10 bar
Temperature: 180 °C
... The gate valves to the sectioning of a bulk material, through the central shovel which intersects the fluid passage and provides complete sealing. Steel or polymer construction with square, round or rectangular passage cross-section The ...
Palamatic Process
Pressure: 16 bar
... PRODUCT CHARACTERISTICS Mostly made of FiberTech composite, Leader WYES have ultra lightweight PN16 wye ball valves. Equipped with wide opening/closing handles for excellent grip with gloves, they also have swivel inlet for added safety. Generating ...
Pressure: 0.5 bar
... Maintaining pressure Pressure loss, inlet / outlet 0.5 bar Valve switching time: 15 ms IP rating 67 ...
DN: 34 mm
Flow rate: 30 l/min
... Medium valve for 100 L to 220 L large volume containers. Valve that ensures high velocity drainage - 30 L/minute. Food contact material. Drainage tube may be installed. Drill size: 34 mm NB: check that the valve ...
... Pro-Fill Valve is a standard valve designed for golf cart battery watering applications or any other battery watering applications in enclosed spaces. ...
... is normally fed, through rapid connection, by the air line and in its turn feeds, through a medium pressure hose, a demand valve and a mask. On SWOV body there is also a second input connection from an alternative emergency source or ...
D.P.I. s.r.l.
... control abrasive valve uses ultra-wear-resistant composite materials, long life, easy flow adjustment, can spray steel shot, steel sand and other large materials. During sandblasting operation, a control signal is sent to the intake ...
DN: 2,500, 3,000 mm
Pressure: 30, 160 bar
... proven experience, FTM is able to design and produce customized main shut-off and both spherical and butterfly valves as well as pressure relief valves. ...
DN: 65 mm - 150 mm
... This model is designed for installation in a flight conveyor line. Materials: Our samplers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321 ...
DN: 0.5, 0.75 in
Pressure: 4,350 psi
Temperature: -20 °C - 120 °C
... LSQ-HDB Modular valve series is the latest Songqiao innovation designed to meet the requirements of the mobile equipment market. Designed with the feedback from the market and with the major OEM collaboration, it has a residual pressure ...
the best suppliers