... Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure differences than at full load. ...
Welland & Tuxhorn AG
DN: 0.5 in
Pressure: 0 bar - 16 bar
Flow rate: 0 m³/min - 60 m³/min
... Mechanical Float Drain Valve FD work without loss of compressed air. A FD floating trap is the most effective of all solutions to the conclusion of the condensate system. It works without any loss of compressed air, is easy to install ...
DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C
... PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three valves ...
PCI INSTRUMENTS LTD
DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min
... 3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10 ...
Blasberg GmbH
DN: 8 mm - 100 mm
Pressure: 125, 69, 100 bar
Temperature: -38 °C - 220 °C
... 3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve. (Option: FDA - Firesafe) EU1935 ...
Dansk Ventil Center A/S
Temperature: -40 °C - 120 °C
... cavity vented to prevent Pressure lock Schrader valve options: 1/4” or 5/16” schrader valves available Integral schrader access fitting on brass body Full flow port design on valves 3/8” ...
Henry Technologies
Pressure: 60 psi - 100 psi
... The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate adhesives and anaerobic chemistries. This versatile diaphragm dispense valve can be used for single component bead, dot, potting, or encapsulation ...
PVA
DN: 0.125 in
Pressure: 0 bar - 400 bar
... Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high accurate control of vacuum or pressure. Low cost Durable Low ...
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
... Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves have ...
NOSHOK
Pressure: 125 psi
... Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking Pressure Currently Available MNV-10-32MF ...
Valve Check, Inc
DN: 8 mm - 47 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 120 °C
... DESCRIPTION • 2-way ball valve BSP female threated • Body and Ball Brass MS58 chromium plated • Seats PTFE • O-rings Viton® • Lever aluminium epoxy coated • Working pressure maximum 40 Barg up to 95° C., 25 Barg from 95 up to 120° ...
Vapo Techniek B.V.
DN: 50 mm - 200 mm
... Model No.: BB300 Body Material:UPVC,PP,PPG,PVDF,CPVC Disc:UPVC,PP,PPG,PVDF,CPVC Stem:SUS410(standard),SUS316,SUS304 Seat:EPDM,VITON,NBR,HYPALON O-Ring:EPDM,VITON(FPM) Size: DN50(2")-DN200(8") Standard:JIS,ANSI,DIN ...
Shie Yu Machine Parts Industrial Co., Ltd.
DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C
... Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure rating SW up ...
Stahl-Armaturen PERSTA
DN: 0.125 in
Pressure: 70 psi - 300 psi
... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the spring (double acting). The TS5440 ...
TECHCON SYSTEMS
... Pressure reducing valves The pressure reducing valve is a device designed to reduce the pressure of a gas from an initial generally variable value to a final given value at the end of a process. Primary, secondary and ...
ODL
DN: 50 mm - 2,000 mm
... Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is appropriate for ...
C.M.O.
DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C
... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...
Budenberg
Pressure: 350 bar
Flow rate: 20 l/min
... This 3-ported, externally piloted counterbalance valve is 8-size, cartridge style, low leakage with hydraulic vent. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally ...
Comatrol
DN: 6 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 130 °C
... T-handle, square cap, underground adaptor, lockable sealing cap from 3/4”. Available colours: black, red, yellow. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control. ...
EFFEBI
DN: 0.375 in - 2 in
Pressure: 150 psi
Temperature: 70 °F
... All model 83 open/close electrically actuated ball valves sizes 3/8″ thru 2″ have direct mounted unidirectional 90º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA 4X), have a green ...
Clark
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused frame ...
DN: 0.25 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 450 °F
... The general purpose carbon steel ball valve is available in sizes 1/4" - 4" with a working pressure of 1000PSI (150 PSI WSP steam rating). Available with NPT (threaded) or socket weld end connections. ISO 5211 mounting pad standard with ...
Valtorc
... P2/J2 series adopt unbalanced trim design, top guiding, and simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 series are also ...
Wuxi Smart Auto-control Engineering Co., Ltd.
... - Fully enclosed safety guard - Increased foot pedal area for minimum fatique - Stainless steel construction S Quick-change cartridge - Reversible block for convenient connecting ...
DN: 2, 1.5, 1.25, 1 in
... BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped with connectors on ...
BEULCO GmbH & Co. KG
Our animal feed solutions help you produce top quality feed and to make economical use of your raw materials and energy. As a technology partner with long-lasting experience in the industry, we support you in every aspect of the production of reliable ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
WIKA Alexander Wiegand SE & Co. KG
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy cleaning of the ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection valves ...
WIKA Alexander Wiegand SE & Co. KG
Pressure: 210, 280 bar
Flow rate: 4 l/min - 230 l/min
... Servo valves are used in closed control loops for high-accuracy control of hydraulic energy, with multi-kilowatt hydraulic power controlled by input signals in the milliwatt range. Extremely severe demands are placed on servo valves ...
... 500S valve is solenoid operated for precise glue patterns at high machine speeds. the valve is used to atomize adhesive. The valve features a zero-cavity plunger/seat design to prevent clogging and has ...
... The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap style (round ...
... The material regulator valve (MVR) is an air operated valve that slides. The MVR Valve has a tapered needle and specially designed fluid ports to permit precise regulation and rapid response to air ...
... The Binks Shut Off Valve is designed to provide precise fluid control solutions for various industries. With its advanced technology and robust construction, this valve ensures accurate sealing and painting processes. ...
DN: 20 mm - 200 mm
Pressure: 20, 50 bar
Temperature: -50 °C - 427 °C
... shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections offering a complete high-performance valve ...
Pressure: 700 psi
... The Copeland NXT Series is a balanced ported valve designed for high efficiency R-410A and R-454B air conditioning and heat pump applications. NXT Series valves operate over a wide range of conditions and applications ...
... runs on the ground. FSV & MSV (Flat and Manual Sand Valves): FSV is for larger machines using expendable mineral or slag media; MSV fits ½- and 1-cuft machines with similar media. LPV (Lo-Pot Valve): Specially designed ...
... /li>
Wabtec Corporation
Pressure: 30 mbar - 500 mbar
Temperature: -25 °C - 55 °C
Flow rate: 0 m³/h - 10 m³/h
... product range of Gas Shut-Off valves is the industry's first integrated gas shut-off valve to combine mechanical valve, motor, sensors and control electronics for smart and pre-payment gas metering. Its ...
... Increase your process flexibility with BKG® HyFlex™ Multiport Valves. Distribute your melt stream to multiple strands or merge multiple streams to one strand in a seamless and smooth transition. Overview In polymer processing, ...
Nordson Polymer Processing Systems
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made of stainless steel, ...
DN: 0.5 in - 2 in
... off, floating, or proportional control If actuator is supplied, it is not mounted, allowing access to sweat end connection Valve connection types: threaded, sweat and press fit ...
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... Applications: Feed-water and live steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, pneumatic, ...
the best suppliers