DN: 0 mm - 10,000 mm
Pressure: 2 bar - 16 bar
... The SKUM Water Actuated Foam Valve (WAFV) consists of a ball valve and an approved, corrosion-resistant actuator. The valve operates by water pressure only, from the mains water pressure supply on a bladder ...
Pressure: 600 psi
... the battery back-up for when there is a power failure. Features Double O-ring seal on valve shaft Manual test button Corrosion resistant valve coating Reliable long-life Visual operation indicators Benefits ...
DN: 20, 15, 25 mm
Pressure: 2.5 bar
... Ajax WaterStop Jeweller is a smart valve designed to protect facilities from flooding. The valve automatically shuts off the water supply within 7 seconds of a leak being detected, whether by LeaksProtect Jeweller or ...
... seals. The result – a quality EGR valve, highly resistant to extreme heat, contamination, corrosion and wear. Precision engineered Even the smallest of differences in the shape of the valve head can affect both ...
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
... Self-draining, easy-to-clean bottom outlet valve CleanValve from De Dietrich is a high-performance bottom outlet valve designed for glass-lined, stainless steel, and nickel alloy reactors and tanks. Its self-draining ...
Temperature: -50 °C - 105 °C
... TECHNOR® drainage valve for installation on enclosures with increased safety intended for use in explosive atmospheres zones 1 & 2 (gas), 21 & 22 (dust). This valve allows condensation to be drained from inside the enclosure. ...
DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar
... M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. It features ...
DN: 32 mm - 225 mm
Pressure: 10 bar
... the FRIALEN-Ball Valve KHP must be lined up to suit the type of actuation intended, in order to ensure that the installation kit KBS will placed correctly. Good reasons for using the FRIALEN-Ball Valve KHP: The ...
Aliaxis
Pressure: 14 bar
Temperature: 49 °C
Flow rate: 5 ft³/min - 35 ft³/min
... With the Hankison By-Pass Valve you can service your system components and still use the system. The By-Pass Valve eliminates the expensive installation costs and space limitations of conventional three valve ...
DN: 15 mm - 400 mm
... Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control with pump protection system by maintaining the ...
ASCON TECNOLOGIC
DN: 15 mm - 400 mm
Pressure: 0.8 bar - 2.8 bar
... Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling with water injection -Special ...
ASCON TECNOLOGIC
DN: 15 mm - 20 mm
... Threaded valves with 500 N actuator -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model ...
ASCON TECNOLOGIC
... -operated control valves provide a simple and cost-effective alternative to our proportional HCV and RCV control valves. The lever allows direct switching between both directions of rotation and the neutral position. These ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 10 bar
... In cooperation with HiP High Pressure Equipment, we offer an extensive range of valves — also known as high pressure valves. With pressures up to 10,000 bar (150,000 psi), we provide a suitable solution for every application. ...
DN: 9.525 mm
Pressure: 10 bar
... SOLENOID VALVE FOR AIR, TYPE 3/2, 3/8", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/2" (F). 24 V DC. Normally closed type. 10 bar. ...
SAMOA Industrial, S.A.
DN: 6.35 mm
Pressure: 10 bar
... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, 1/4", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/4" (F). 24 V DC. Normally open type N.O. 10 bar. ...
SAMOA Industrial, S.A.
DN: 6.35 mm
... AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve. ...
SAMOA Industrial, S.A.
Pressure: 100, 63 bar
... The ideal and reliable high-flow CO2 pressure reducing valve for use with CO2 gas or liquide. ...
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, 1/graphite and 1/oxygen. Depending ...
DN: 12, 14 mm
... One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. It can be ordered through Valvo ...
Pressure: 100 bar
Temperature: 80 °C
... The ball valve is manufactured from H17N14M2 grade material, which is equivalent to 316 stainless steel. Maximum temperatures of the medium should not be more than 80 degrees Celsius. The maximum working pressure is 100 bar. Input and ...
Pressure: 100, 500, 1,000 bar
... High-pressure valve In addition to the technical challenges in pressure generation, applications in high-pressure technology often require special high-pressure valves with the desired properties which are only very ...
... shredder can be used upstream, in order to break up the chips to an extractable quality. Site of operation: - As a shut-off valve in the chip suction pipe system Weight: - ca. 20 kg Dimensions L x W x H: - 790 x 230 x 332 mm Outlet opening ...
The vacuum suction unit conducts the shredded chips via a worm conveyor to an intake port connected to the suction system. The vacuum suction unit is normally mounted downstream of the discharge conveyor of a machine tool. As an option, a shredder can ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
... HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. ...
... 3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, ...
DN: 80 mm - 400 mm
... gate
valve from Kubota Brabender Technologie. Designed for reliable on/off control in feeder and process lines, primarily used as the automatic refill
valve for loss‑in‑weight feeders.
Technical details
- Slide
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... 100 is a flat slide gate valve for on/off control of bulk solids flow, designed primarily for automatic refill of loss-in-weight feeders. It features a double-acting pneumatic actuator and a pre-mounted 5/2-way solenoid valve. ...
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
... gate valve for solids flow on/off control
Kubota Brabender Technologie GmbH
Pressure: 6, 10 bar
... provides you with an extremely compact and safe conveying device from a single source. On request, the Volkmann rotary valve is also available in a pressure shock-resistant version up to 10 bar and a pressure-resistant version up ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 16 bar
Temperature: -10 °C - 100 °C
... Materials and construction
- Valve body: DZR corrosion-resistant brass (EN12165-CW617N-DW)
- Flow sensor: PEEK body with HC276 electrodes
- Valve unit: modulating 2-way ball valve,
Flow rate: 5 l/min - 2,400 l/min
... developed a range of 3 stage valves. The characteristics of these valves have been optimized to provide the best possible performance in test applications when combined with the Hydropuls actuators. Special versions of ...
Highly accurate and linear pressure regulating device
DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C
... purposes. Description BRC/BDV Series Diaphragm Valve BRC and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing which protects completely the ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version 410-C is designed with a stronger ...
DN: 13 mm - 73 mm
Pressure: 0 bar - 45 bar
Temperature: -40 °C - 120 °C
... operated shut-off ball valve designed for liquid, suction and hot-gas pipelines in commercial air-conditioning and refrigeration systems. The valve stem opens or closes the internal flow path and the valve ...
DN: 0.25 in
Pressure: 3 MPa
Temperature: -25 °C - 120 °C
... Product description
- One-way service valve with internal valve core.
- Intended for freezers, cold stores and air-conditioning units.
- Imported internal valve for reliable
DN: 0.5 mm - 6 mm
Pressure: 0 bar - 28 bar
... discharge-bypass valve is a load-adjust component for refrigeration systems with a nonadjustable compressor. It operates as an automatic expansion valve to maintain a fixed evaporation pressure and to preserve minimum ...
DN: 50 mm
Temperature: -26 °C - 240 °C
... 2” access fitting. The valves have a bleed valve located on the non-process side of the ball. This bleed valve may be used to drain the retrieval tool, sample process, or be used as a path for back-pressuring. ...
DN: 5 mm - 40 mm
Temperature: -40 °C - 125 °C
... Nylon screw plugs Materials: UL approved Nylon PA66(Flammability UL94V-2) IP rating: IP68 Operating temperature: -40℃ to +100 ℃ Color: Black RAL9005 Thread Product code thread outer diameter(mm) thread length(mm) PG7 PG7-PL 12.5 9.5 PG9 ...
DN: 8 mm - 40 mm
... Air ventilation valve-Stainless steel AISI304 Materials: stainless steel AISI 304 Operating temperature: -40℃ to +150 ℃ moisture permeability: >5000g/24H.M2 Hydrostatic pressure: ≥100mbar for 30min Thread Product code air permeability(@70mbar) thread ...
DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C
... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm valve ...
DN: 0.75, 0.25, 0.5 in
Pressure: 100 bar
Temperature: -20 °C - 50 °C
... The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Handle: Steering wheel Handle material: Nickel-plated brass Valve ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
... Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges ...
Pressure: 3.5 bar
... Product Details
With the SAMflow, sampling of powder and granules from pneumatic conveying lines is effortlessly possible. This device uses the conveying pressure of the process almost automatically for sample extraction. It uses the existing ...
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure range up to 4200 ...
Pressure: 1,400 bar
... MULTI-COUPLING SYSTEM S.r.l. designs and manufactures oil-hydraulic and hydrodinamic groups and plants for the most varied industrial sectors and for specific applications. The company was established in Legnano (MI), but soon the development of the ...
DN: 15 mm - 100 mm
... Smart Valve Kit – Remote Valve Control & Monitoring for Irrigation (DN15–100) The AQ Smart Valve Kit combines the robust AQ IoT Data Logger with integrated support for remote control of solenoid irrigation ...
Pressure: 0 bar - 15 bar
... Required to control vacuum for Hei-VAP Control models with valve-controlled vacuum pumps. Can be positioned for easy access and cleaning. Not required for manual vacuum control ...
DN: 2 in - 12 in
Pressure: 200 psi
... • Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be operated by the ...
... Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. They are a crucial ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
... Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available cross-section can be increased or decreased, ...
Temperature: 60, 100 °C
Flow rate: 4 l/min - 15 l/min
... of flow control valves offers excellent, economical, independent flow control, which can be used in any application where a needle flow control valve is required. SERIES CV100 FEATURES * OFFERS AN INDEPENDENT ...
MPB INDUSTRIES
DN: 0.375 in
Pressure: 700 bar
... ⅜" - 18 NPT connections Ensures system safety and control ...
... be paid to the use of electric ball valves and butterfly valves in the following environments. Function classification 1. Bypass valve: The ball valve is generally opened by static ...
the best suppliers