Valves

Flow rate: 2 l/h - 15 l/h

... digital output. The non-linearity of the valve can be repaired by software in five points. Built-in security feature: In case of power loss the valve has a battery backup that closes or opens the valve. ...

DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa

... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

... AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only), ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...

Temperature: 425, 325, 530, 200 °C

... •Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil etc non corrosion ...

... The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") and PP3048063020 (63mm x 2"). ...

... V Series Valves V Series Valves are used with full flow dispensers where feed rate adjustment is desired at the point of lubrication. Horizontal design of needle valve minimizes contamination at ...

... Dredge Gate Valve FEATURES: The dredge valve is designed in such a way that there are no fasteners inside the body Dredge valve is made of fabricated high tensile steel and cast steel The dredge valve ...

DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C

... high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 according to EN ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

... operating cycles High-performance valve with a extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized by a solenoid ...

... The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection to the flow-operated ...

... flanged compact ball valve ; 2-way GRPP, ASPP or PVDF from 1/2'' to 2'' EPDM, FKM or FEP/FFKM o'ring PN10 ...

... by an external hydraulic or pneumatic pressure. The valve position will be controlled by a hand operated selector valve. The valve and the controls will be a Dorot Series 100 valve or ...

... Dimensions: DN04 to DN25 body: FSt-PI, free cutting steel, S355J2G3 ball + stem: free cutting steel, stainless steel (1.4571/316Ti) sealing: plastics, metal Pressure range: up to PN500 (note table of dimensions) Field of application: hydraulics, ...

DN: 6 mm
Pressure: 0 bar - 290 bar

... The UZRR6 Pressure-Reducing Valve is size 6, and has a maximum working pressure of 31.5 MPa. Its flow rate reaches up to 50 dm3/min. The valve is designed with a main valve and a pilot valve. ...

Pressure: 3,000 psi

... Model RD-900 Selector Valve - 30 GPM SPECIFICATIONS Pressure Rating Maximum Operating Pressure ........ 3000 psi Flow Rating .....................................30 GPM Filtration: For general purpose valves, ...

Pressure: 200 bar
Temperature: -20 °C - 65 °C

... Key advantages - High pressure brass cylinder valve for Inert, Inert mixtures and flammable gas service - Permanent gas tight seal - π marking according TPED directive - Tested according EN ISO 10297 and CGA V9 standards - Compatible ...

DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C

... – shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer bellows with long ...

DN: 0.375 in - 1 in
Flow rate: 30 l/min - 200 l/min

... Throttle Valves Valve Size 04 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-piate Mounting T : Threaded Connections Sériés Number ...

... JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and bonnet. Backseat ...

DN: 50 mm - 1,400 mm
Temperature: -196 °C - 593 °C

... Product type On/Off Type Product description Top-entry Ball Valve Model SQ*47F/H Size NPS 2～NPS 56 ...

... . AFC Monel valves serve many different applications in these industries: • Chemical • Oil & Gas • Pharmaceutical • Nuclear Power • Marine • Petrochemical • Oil Refining • Sea Water Characteristics 1. AFC butterfly valve ...

... Applicable standards: STEEL BALL VALVES API 608/API60 STEEL BALL VALVES ISO 14313 FIRE SAFE, API 607 ANTI STATIC, API 608 STEEL VALVES,ASME B16.34 FACE TO FACE ASME B16.10 END FLANGES, ASME ...