Valves

... Exceptionally low pressure drops - Postive mechanical lockdown - Fabricated steel construction - Carbon& Stainless Steel - Valve sizes from 1 1/2" to 10" ...

... ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB ...

DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C

... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars from 1/2* to 1"1/4. ...

DN: 12 mm

... This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging from 8 - 50 ...

... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup valve ...

DN: 0.25 in
Pressure: 5,000 psi

... Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits requiring reduced ...

DN: 25 mm - 150 mm

... The "Monopok" valve is a 1/4 turn ball valve shutoff, with full waterway, made of an aluminium alloy section heat-treated. The whole is machined on a computerised and automated machine tool, which guarantees a precision ...

DN: 1 in - 10 in

... Both steam pressure reduction and temperature reduction (Desuperheating) are done in a single valve making it an extremely efficient, cost effective and compact solution. Features - Compact Design - High turndown (40:1) - Reduced ...

DN: 34, 25, 50.5 mm
Pressure: 12 bar
Temperature: 150 °C

... Characteristics: Side pipe sanitary sampling valves are designed for sampling of liquids on pharmaceutical, chemical, F&B and cosmetics products. O-Ring closing system. Documentation: Laser marking for traceability and validation processes. ...

DN: 0 mm - 10,000 mm
Pressure: 1 bar - 150 bar
Temperature: -40 °C - 60 °C

... long service life.
Operation

• Unscrew the protective threaded cap before use.
• With the valve upright: connect the lower inlet thread to the gas cylinder; connect the side outlet thread to the consumer.
• Turn

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 15 mm - 25 mm
Pressure: 16 Pa
Temperature: 1 °C - 110 °C

... Valves used for control of hot and cold water in climate, heating and ventilation systems. They can also control glycol-mixed water in for example liquid connected recovery systems. Intended to be used together with the RVAZ4 actuators. Specifications ...

Pressure: 0 bar - 300 bar
Temperature: -10 °C - 80 °C
Flow rate: 50 l/min

... CETOP 3 modular single-way flow regulating valve, not compensated. Type for regulation inflows ...

DN: 150, 200, 250 mm
Pressure: 1 bar
Temperature: 100 °C

... Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The product is ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

... TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton o’ring stem7. Stem ...

DN: 25 mm - 50 mm
Pressure: 16 bar

... Angle valve with threaded terminals for potable water or non-aggressive liquid systems. Flow regulation by rotation of the stem. Also available with counter-clockwise closing system. Vertical installation. - Materials: - Ductile cast ...

DN: 32 mm - 50 mm
Temperature: -30 °C - 100 °C

... This Industrial valve is a ball valve GB 2-way type characterized bya round body. Ball seats measure from DN32 to DN50 with O-rings in NBR, FKM, EPDM and MVQ. This ball valve works with an operating pressure ...

DN: 0.25 in
Pressure: 3 bar - 200 bar
Temperature: 10 °C - 50 °C

... The Pressure regulating valve is suitable for reducing the material pressure to the required working pressure and for leveling out pressure fluctuations in the material supply of greases, oils and pastes. This ensures an absolutely uniform ...

... Emergency Shutoff Valve Functional Features 1. Applicable to gasoline, kerosene and diesel; 2. When the leakage of the pipeline is greater than or equal to 11.41/min. the side leakage device will control the oil output in time: 3. ...

DN: 19.05 mm - 203.2 mm

... electropolished to the exact standards. The valves are designed with versatility in mind, available in many different configurations. All valve combinations are available in sizes 0.75 to 8.0 inch. - Manual valve ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar

... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...

DN: 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 100 °C

... mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. PEKI valves ...

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...

Pressure: 25 MPa
Temperature: -40 °C - 80 °C
Flow rate: 220 l/min

... functions: lifting, stopping, and lowering. The product is equipped with an adjustable relief valve to achieve reliable protection for the entire system. The valve body is coated with electrophoretic coating, which greatly ...

... Chemical Injection Metering Valve (CIMV) , also called as Chemical Throttle Valve (CTV) or Subsea Chemical Injection Delivery System (SCIDS) , is a device for the precise control and metering of various chemicals (such ...