Valves

... diaphragm pressure regulator MR or the electronic pressure control system C MOVE which in connection with the electronic control valve Move 1250 or Move X controls the gas flow at a individual configured pressure. ...

Pressure: 140 Pa - 840 Pa
Temperature: 1 °C - 42 °C
Flow rate: 4,500, 5,900 l/h

... piston positions. “Totalizer” function tracks total amount of water treated. Audible Cycle Advance Alarm sounds if the valve is stuck in any position for more than 2 minutes. Self-charging capacitor keeps date / time of day for ...

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

... Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - 177 mm ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

... Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to control the flow ...

... scenarios — all with no required feedback for the position of the tensioner rod. That’s because the engineers behind the Olmsted valves provided by Oilgear developed a proprietary means of achieving the majority of the features of the ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

... Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

... industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316 ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C

... RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact with the medium ...

DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C

... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves or valve ...

DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C

... Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE SIZE PRESSURE ...

DN: 4 mm - 15 mm
Pressure: 0 bar - 8 bar
Temperature: 160 °C

... the actuator is the same size as the bonnet flange connecting diaphragm and body Advantages in multiport bodies and manifold valve assemblies Low control air volume, high switching speed High repeatability Control air connection on the ...

Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min

... — The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve is suitable ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C

... Body material Ductile iron GGG50 PN (end) PN10/16-ASA150-JIS10K Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever ...

... ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB ...

DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C

... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars from 1/2* to 1"1/4. ...

DN: 12 mm

... This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging from 8 - 50 ...

... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup valve ...

DN: 0.25 in
Pressure: 5,000 psi

... Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits requiring reduced ...

DN: 25 mm - 150 mm

... The "Monopok" valve is a 1/4 turn ball valve shutoff, with full waterway, made of an aluminium alloy section heat-treated. The whole is machined on a computerised and automated machine tool, which guarantees a precision ...

DN: 34, 25, 50.5 mm
Pressure: 12 bar
Temperature: 150 °C

... Characteristics: Side pipe sanitary sampling valves are designed for sampling of liquids on pharmaceutical, chemical, F&B and cosmetics products. O-Ring closing system. Documentation: Laser marking for traceability and validation processes. ...

DN: 40 mm - 100 mm

... removing the valve from the pipeline, reducing downtime.

Technical specifications

• Model: mod. VV
• Function: adjustable port air valve for flow control (manual or automatic)
• Not

... You may need to integrate your actuators into your valve interlock operating procedures and sequences. Using MOV interlocks, you can regulate the components of an actuator, mechanically locking (blocking) the power switch (supply), the ...

DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F

... Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical applications when reliability and ...

... Product overview

• Name: Needle valve
• Model: GCT-02-31
• Brand: YUKEN
• Application: Die casting machine

• Model: GCT-02-31
• Function:

DN: 0 mm - 10,000 mm
Pressure: 6 bar - 64 bar

... request).

AVAILABLE VERSIONS

• Standard wafer valve
• Wafer valve with gearbox/box
• Motorized wafer valve with gearbox/box
• Motorized wafer valve

... Description - Specification - Service ...

... Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ISO standard. Competitive price, with fast delivery time, most of size in stock. ...

DN: 0 mm - 10,000 mm
Pressure: 1 bar - 150 bar
Temperature: -40 °C - 60 °C

... long service life.
Operation

• Unscrew the protective threaded cap before use.
• With the valve upright: connect the lower inlet thread to the gas cylinder; connect the side outlet thread to the consumer.
• Turn

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 15 mm - 25 mm
Pressure: 16 Pa
Temperature: 1 °C - 110 °C

... Valves used for control of hot and cold water in climate, heating and ventilation systems. They can also control glycol-mixed water in for example liquid connected recovery systems. Intended to be used together with the RVAZ4 actuators. Specifications ...

DN: 150, 200, 250 mm
Pressure: 1 bar
Temperature: 100 °C

... Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The product is ...