Valves

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C

... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

... Applications: Single-acting cylinders. Actuation: Flipper lever-operated. Functions: Cylinder piston “advance,” “hold” and “retract.”. Used on these pumps: PE172 and PA172. ...

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...

DN: 25 mm - 80 mm
Pressure: 1 bar - 10 bar

... pharmaceuticals industry. Safety: The double guided valve rod of the safety relief valve guarantees reproducible functional behaviour even in critical operating conditions. Economic efficiency: The optimized, divided ...

DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C

... For control of air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this figure may vary). ...

Pressure: 100, 210 bar

... 2-Way Ball Valve (FxF) Working Pressures: 100 | 210 bar (1500 | 3000 PSI) ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket : 2 x EPDM O-ring Gasket ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

... The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries. ...

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 thermoplastic ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

... Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and disk with triple ...

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

... Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high operational safety. PRODUCT ...

DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C

... Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, corrosive, erosive, ...

... such as downstream valves and controllers, upstream valves and controllers, vacuum isolation valves and integrated solutions. MKS manufactures downstream pressure control subsystems which incorporate ...

DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C

... Features ・This solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most suitable for the case sulfuric acid ...

DN: 40 mm - 300 mm
Pressure: 10 bar - 16 bar

... DN 40 - 300 PN 10 - 16 Body: EN-JS1050 Coating: Epoxy Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally enamel, externally EKB. For water, air and non-aggressive ...

DN: 3 in - 5 in

... area series of butterfly air intake shutoff valves are ATEX approved for Zone 1, Gas Group IIB, T4 or Zone 21 hazardous area applications. The 12 and 24VDC valves are designed with “fail safe” actuation. The valve ...

DN: 0.375 in - 0.75 in

... Lever Manual Valves 31 Series are hand controlled poppet valves, for the control of single or double-acting air cylinders. These valves are offered with horizontal or vertical hand lever, 4-way 3-position, ...

DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ...

DN: 0.5 in - 2 in

... Lead Free Bronze RS Gate Valve with Press Connections, 200 CWP, Sizes: 1/2" to 2" ...

... The actuator pilots of the OS Series are especially designed for pressure control in regulators and shutoff valves, they can operate on maximum and minimum pressure, on maximum only, on minimum only. ...

DN: 0.5 in - 2 in
Temperature: -10 °C - 180 °C

... Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Pilot media: air, inert gases, water Body material: bronze (CC491K EN 1982 : 2000) Bonnet material: brass (CW617N EN 12165 : 1999) Actuator ...

DN: 15 mm - 100 mm
Pressure: 160 bar

... Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port cone, Mixing-/ ...

Pressure: 50 bar - 1,200 bar
Flow rate: 50 l/min - 600 l/min

... Dimensions: 321x110x110 mm •Weight: 17.8 kg SPECIFIC FEATURES •Bypass valve •Consumer shut-off valve ...

DN: 8 mm - 80 mm
Pressure: 64 bar

... Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions. ...

DN: 10 mm - 100 mm
Pressure: 16, 10 bar

... • Threaded seal-carrier for upstream maintenance without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory tested. • Minimal ...