Capacitive water quality sensor W510--DP10.1

industrialfor wastewater treatmentreal-time

Online Peracetic Acid Analyzer with P10.1 sensor for High Water Temperature upto 60 °C The Online Peracetic Acid Analyzer consists of the instrument for LCD type displaying peracetic acid value, optional aqueous solution pH value, and working status; outputting analog, digital, and switching signals and a German-made P10.1 sensor which resists chemical interference (mainly from surfactants), reduces pH dependence, and is not restricted by water quality. With fast response, stable performance, low cost, and minimal maintenance, it provides users with reliable and accurate data. This analyzer is mainly used in fruit and vegetable disinfection , CIP bottle washing , medical endoscope disinfection and cold tank lines etc. Specification Measurement Parameters Peracetic Acid, pH (optional) Measuring Ranges 020.00mg/L; 0200.0mg/L; 5500.0mg/L; 52000mg/L; 505000mg/L;5020000mg/L; 50050000mg/L Lower Limit of Measurement 0.01mg/L(depending on the electrode) Resolution 0.01-100mg/Ldepending on the measuring range Accuracy (@25℃, pH 7.2) In the measurement range of 0 - 1000ppm, when calibrated at 400ppm, the error is ±2% of the measured value or ±3ppm.take the larger one In the measurement range of 1000 - 2000ppm, when calibrated at 1600ppm, the error is ±5%of the measured value or ±5ppm.take the larger one) Response time T90≈8 minutes Drift Approximately - 1% per month (after calibration at 25℃ and pH = 7.2) PH range 1.0 - 8.0 Maintenance Cycle ≥90days Operating temperature 0 - 45℃ Display LCD screen Power supply 105235VAC50±1Hz/24VDC±5%(DC is optional) Power ≤12W Analog Output Two ways of analog outputs Digital output RS485 interface