Product Overview
The online chlorine dioxide analyzer adopts a genuine German-imported CD4.2 chlorine dioxide sensor and operates on the principle of the coated dual-electrode constant current method.
Application
Municipal tap water, secondary pressure-boosted water supply in pipe networks, water for food factories and beverage factories.
Features
- Response speed up to 15 seconds (maximum)
- Built-in automatic temperature compensation to improve measurement accuracy
- No zero calibration required; calibration cycle no more than 3 months
- Small measurement range of 0~0.5mg/L, with a minimum detection limit of 0.005mg/L
- Two input signal interfaces, supporting simultaneous measurement of any one parameter among pH, ORP, conductivity, turbidity, dissolved oxygen, etc.
- Multiple data output methods: 4~20mA, RS485 MODBUS
- Controller supports wall mounting/panel mounting/pipe clamp mounting
- Made of aluminum alloy, featuring high strength, oxidation resistance and corrosion resistance, with a protection class of up to IP65
Technical Parameters
- Measurement Parameter: Chlorine Dioxide
- Measurement Range: 0.005~0.500/2.000mg/L; 0.05~5.00/10.00/20.00mg/L
- Lower Detection Limit: 0.005mg/L (depending on the range)
- Resolution: 0.001mg/L (depending on the range)
- Response Time: T90≈15 seconds
- Drift: Approx. -1 per month (after calibration at 25℃, pH=7.2)
- pH Range: 1.0~12.0
- Maintenance: Membrane cap replacement cycle: 1 year (depending on water quality)
- Flow Rate: In flow cell: 250~500mL/min
- Operating Temperature: 0~45℃
- Display: LCD screen
- Power Supply: 105~235VAC, 50±1Hz / 24VDC±5 (DC optional)
- Analog Output: Two analog outputs (load resistance <500Ω)
- Digital Output: RS485 interface, MODBUS RTU protocol
- Relay Output: Three relays, 5A 250VAC, 5A 30VDC
- Material: Bottom case: Cast aluminum with spray coating; Top cover: PA66+30GF with spray painting
- Dimensions: 145*145*174mm (H*W*D)
- Protection Class: IP65
- Certification: CE, RoHS, REACH (sensor)